USED MAZAK SUPER QUICK TURN 15M
The MAZAK SUPER QUICK TURN 15M is a CNC turning center designed for production turning combined with live-tool milling operations. The “M” designation identifies the machine as a milling-capable version, giving it the ability to perform turning as well as drilling, tapping, cross-hole machining, and other milling operations with driven tools. The machine is built around a rigid horizontal turning platform with CNC-controlled X and Z axes, C-axis spindle positioning, and a live-tool turret. Historical specifications for the Super Quick Turn 15M show a maximum swing of approximately 530.9 mm (20.9″), maximum turning diameter of approximately 298–300 mm (11.75″), and maximum machining length of approximately 528 mm (20.8″).
The spindle configuration provides an approximately 61 mm (2.4″) spindle bore on commonly documented machines, with bar capacity around 51–52 mm (2.0–2.06″). Spindle speeds can reach approximately 5,000 RPM, with spindle motor configurations around 20–25 HP depending on the specific machine. The spindle uses an A2-6 nose and is designed for production turning of small- to medium-sized shafts, bushings, flanges, fittings, and other cylindrical components.
The Super Quick Turn 15M also provides an important advantage over a conventional two-axis CNC lathe through its live-tooling capability. Documented machines use a 12-position turret with driven tools capable of approximately 3,000 RPM, allowing the machine to perform milling and drilling operations without transferring the workpiece to a separate machining center. This can reduce setups and improve positional accuracy between turned and milled features.
The machine is commonly found with Mazatrol T-32-3 or Mazatrol T-Plus controls, depending on production year and configuration. Used examples can also include chip conveyors, coolant systems, tailstocks, hydraulic 3-jaw chucks, parts catchers, tool presetters, and other production accessories. Because these machines were produced over multiple years and configurations, the exact specifications of an individual Super Quick Turn 15M should be verified before purchase.
MAZAK SUPER QUICK TURN 15M – AXIS
| Specification | Value |
|---|---|
| X Axis | 180 mm (7.09″) Approx. |
| Z Axis | 575–578 mm (22.6–22.8″) Approx. |
| C Axis | Yes |
| X-Axis Function | Cross-Slide Travel |
| Z-Axis Function | Longitudinal Travel |
| Machine Configuration | CNC Turning Center with Live Tooling |
| CNC Axes | 3-Axis / X, Z, C |
| Rapid Traverse | Approximately 1,180 IPM |
| Live Tooling | Yes |
The Super Quick Turn 15M combines X and Z CNC turning axes with C-axis spindle positioning and driven tooling. Exact axis travel can vary slightly by production configuration.
MAZAK SUPER QUICK TURN 15M – AXIS TRAVELS / WORK ENVELOPE
| Specification | Value |
|---|---|
| Maximum Swing | 530.9 mm (20.9″) |
| Swing Over Carriage | 400 mm (15.74″) Approx. |
| Maximum Turning Diameter | 298–300 mm (11.75″) |
| Maximum Machining Length | 528 mm (20.78″) |
| X-Axis Travel | 180 mm (7.09″) |
| Z-Axis Travel | 575–578 mm (22.6–22.8″) |
| Spindle Bore | Approximately 61 mm (2.4″) |
| Bar Capacity | Approximately 51–52 mm (2.0–2.06″) |
| Chuck Size | 8″ |
| Distance Between Centers | Configuration Dependent |
The work envelope makes the Super Quick Turn 15M suitable for small- and medium-sized production components. The approximately 300 mm maximum turning diameter and 528 mm turning length provide useful capacity while keeping the machine relatively compact for a CNC turning center.
MAZAK SUPER QUICK TURN 15M – CAPACITY
| Specification | Value |
|---|---|
| Machine Type | CNC Turning Center |
| Turning Configuration | Horizontal |
| Maximum Swing | 530.9 mm (20.9″) |
| Maximum Turning Diameter | Approximately 300 mm (11.75″) |
| Maximum Machining Length | Approximately 528 mm (20.78″) |
| Chuck Size | 8″ |
| Spindle Bore | Approximately 61 mm (2.4″) |
| Bar Capacity | Approximately 51–52 mm |
| C-Axis | Yes |
| Live Tooling | Yes |
| Tailstock | Yes on Common Configuration |
| Sub-Spindle | No on Standard Configuration |
The 15M is primarily a single-spindle turning center with milling capability. Some listings for machines carrying the Super Quick Turn 15M name represent different configurations, so options such as subspindles should be verified on the individual machine rather than assumed.
MAZAK SUPER QUICK TURN 15M – SPINDLE
| Specification | Value |
|---|---|
| Spindle Type | Main Turning Spindle |
| Spindle Speed | Up to 5,000 RPM |
| Spindle Speed Range | Approximately 35–5,000 RPM |
| Spindle Bore | Approximately 61 mm (2.4″) |
| Bar Capacity | Approximately 51–52 mm |
| Spindle Nose | A2-6 |
| Spindle Motor | Approximately 20–25 HP |
| Spindle Power | Approximately 15–18.5 kW |
| Maximum Torque | Approximately 333 Nm on Documented Configuration |
| Chuck | 8″ 3-Jaw Hydraulic Chuck |
The Super Quick Turn 15M spindle is designed for both general production turning and higher-speed machining of smaller components. A documented 1996 machine lists 18.5 kW spindle power, 35–5,000 RPM, 333 Nm maximum torque, A2-6 spindle nose, and a 61 mm spindle bore.
MAZAK SUPER QUICK TURN 15M – LIVE TOOLING / MILLING SPINDLE
| Specification | Value |
|---|---|
| Live Tooling | Yes |
| Live Tool Speed | Up to 3,000 RPM |
| Live Tool Motor | Approximately 4.1–5 HP |
| Driven Tool Positions | Configuration Dependent |
| Turret | 12 Positions |
| Milling Capability | Yes |
| Drilling | Yes |
| Tapping | Yes |
| C-Axis | Yes |
| Tooling | Live / Turning Tools |
The M configuration allows the Super Quick Turn 15M to perform milling-related operations directly on the turning center. Documented machines list approximately 3,000 RPM live-tool speed and a 4.1–5 HP live-tool motor.
MAZAK SUPER QUICK TURN 15M – TOOL CHANGER / TURRET
| Specification | Value |
|---|---|
| Turret Type | CNC Turret |
| Turret Capacity | 12 Positions |
| Turning Tool Positions | Configuration Dependent |
| Live Tool Positions | Configuration Dependent |
| Driven Tool Speed | Up to 3,000 RPM |
| Tool Type | Turning / Driven Tool |
| Automatic Indexing | Yes |
| Tool Management | CNC Controlled |
| Tool Presetter | Configuration Dependent |
The 12-position turret is one of the defining features of the Super Quick Turn 15M. Depending on the turret configuration, positions can accommodate both conventional turning tools and driven tools for milling, drilling, and tapping.
MAZAK SUPER QUICK TURN 15M – CONTROL SYSTEM
| Specification | Value |
|---|---|
| CNC Control | MAZATROL |
| Documented Control | MAZATROL T-32-3 |
| Other Documented Control | MAZATROL T-Plus |
| Programming | MAZATROL / EIA / ISO |
| Axis Control | X / Z / C |
| C-Axis Programming | Yes |
| Live Tool Programming | Yes |
| Tool Offset Management | Yes |
| Canned Cycles | Yes |
| Conversational Programming | Yes |
Control configuration depends on the production year. Documented Super Quick Turn 15M machines include Mazatrol T-32-3 and Mazatrol T-Plus controls.
MAZAK SUPER QUICK TURN 15M – COOLANT / CHIP MANAGEMENT
| Specification | Value |
|---|---|
| Coolant System | Equipped |
| Flood Coolant | Yes |
| Coolant Tank | Configuration Dependent |
| Chip Conveyor | Available / Equipped on Documented Machines |
| Chip Management | Yes |
| Coolant Pump | Configuration Dependent |
| Machine Enclosure | Enclosed |
| Automatic Lubrication | Yes |
Used Super Quick Turn 15M machines are commonly found with coolant systems and chip conveyors. A documented 1997 machine includes a chip conveyor, while another historical machine is equipped with a coolant system and enclosure.
MAZAK SUPER QUICK TURN 15M – TAILSTOCK
| Specification | Value |
|---|---|
| Tailstock | Yes on Common Configuration |
| Tailstock Type | CNC / Hydraulic Configuration Dependent |
| Quill | Configuration Dependent |
| Center Taper | Configuration Dependent |
| Hydraulic Quill | Available |
| Tailstock Support | Long Workpieces |
Tailstock equipment varies by machine. A documented 1997 Super QT-15M Mark II includes a tailstock, while another 1991 machine is documented with a hydraulic-quill tailstock.
MAZAK SUPER QUICK TURN 15M – POWER REQUIREMENTS
| Specification | Value |
|---|---|
| Electrical Supply | Three Phase |
| Voltage | Configuration / Location Dependent |
| Spindle Motor | Approximately 15–18.5 kW |
| Live Tool Motor | Approximately 4.1–5 HP |
| Coolant Pump | Configuration Dependent |
| Connected Load | Machine Specific |
| Transformer | Configuration Dependent |
Electrical requirements should be verified from the individual machine’s electrical nameplate. The exact connected load depends on spindle motor, live tooling, coolant equipment, control, chip conveyor, and other installed options.
MAZAK SUPER QUICK TURN 15M – DIMENSIONS
| Specification | Value |
|---|---|
| Length | Approximately 3,095–3,100 mm |
| Width | Approximately 1,610 mm |
| Height | Approximately 2,040 mm |
| Machine Weight | Approximately 5,050–5,590 kg |
| Machine Weight | Approximately 11,100–12,300 lb |
| Floor Space | Approximately 10′ × 5.3′ |
| Shipping | Professional Rigging Recommended |
Published and current used-machine records show dimensions around 3,100 × 1,610 × 2,040 mm, with weight varying from approximately 5,050 to 5,590 kg depending on configuration.
MAZAK SUPER QUICK TURN 15M – GENERAL INFORMATION
| Specification | Value |
|---|---|
| Manufacturer | MAZAK |
| Model | SUPER QUICK TURN 15M |
| Machine Type | CNC Turning Center |
| Machine Configuration | Horizontal CNC Lathe with Milling |
| Maximum Swing | 530.9 mm (20.9″) |
| Maximum Turning Diameter | Approximately 300 mm (11.75″) |
| Maximum Machining Length | Approximately 528 mm (20.78″) |
| Chuck Size | 8″ |
| Spindle Bore | Approximately 61 mm (2.4″) |
| Bar Capacity | Approximately 51–52 mm |
| Spindle Speed | Up to 5,000 RPM |
| Spindle Motor | Approximately 20–25 HP |
| Spindle Nose | A2-6 |
| Turret Capacity | 12 Positions |
| Live Tooling | Yes |
| Live Tool Speed | Up to 3,000 RPM |
| C-Axis | Yes |
| Tailstock | Configuration Dependent |
| CNC Control | MAZATROL T-32 / T-Plus |
| Chip Conveyor | Configuration Dependent |
The Super Quick Turn 15M is a compact production-oriented CNC turning center with live tooling and C-axis capability. Because the model was manufactured in different configurations and years, individual machine specifications should be confirmed before listing or purchasing.
INDUSTRIES THAT USE MAZAK SUPER QUICK TURN 15M
The MAZAK SUPER QUICK TURN 15M can be used in a wide range of precision manufacturing applications.
- Automotive
- Aerospace
- Industrial machinery
- Hydraulic equipment
- Pneumatic equipment
- Medical equipment
- Electronics
- General engineering
- Contract machining
- Tool and die
- Automation equipment
- Agricultural equipment
- Energy equipment
- Precision component manufacturing
The combination of turning and live-tool milling capability makes the machine particularly useful for components requiring both cylindrical and cross-machined features.
TYPICAL PARTS MAZAK SUPER QUICK TURN 15M CAN PRODUCE
The Super Quick Turn 15M can produce a variety of small- and medium-sized turned components, particularly parts requiring secondary milling or drilling operations.
Typical parts include:
- Shafts
- Bushings
- Spacers
- Pins
- Flanges
- Couplings
- Hydraulic components
- Valve components
- Fittings
- Bearing components
- Rollers
- Gear blanks
- Threaded components
- Pump components
- Automotive components
- Precision machine components
- Components with cross holes
- Components requiring face milling
- Components requiring radial drilling
- Components requiring tapped holes
Its C-axis and driven-tool capability can allow several of these operations to be completed without removing the workpiece from the chuck.
WHY CHOOSE MAZAK SUPER QUICK TURN 15M
The main advantage of the MAZAK SUPER QUICK TURN 15M is the combination of conventional CNC turning and live-tool machining in one machine. Instead of transferring a turned component to another machine for every drilling, tapping, or milling operation, the M configuration can perform many secondary operations directly on the turning center.
The approximately 300 mm turning diameter and 528 mm machining length provide useful capacity for a broad range of industrial components, while the 8″ chuck and approximately 51–52 mm bar capacity make the machine well suited to small- and medium-sized production work.
The 12-position turret, C-axis, and approximately 3,000 RPM driven-tool capability make the machine especially useful for parts requiring radial holes, cross drilling, tapping, slots, flats, and other milled features.
The Mazatrol control is another important advantage. Depending on the machine’s production year, T-32-3 or T-Plus control provides conversational programming capabilities suited to production turning operations.
WHY BUY USED MAZAK SUPER QUICK TURN 15M
Buying a used MAZAK SUPER QUICK TURN 15M can be an economical way to add CNC turning and live-tool machining capability without the cost of a new production turning center.
The machine is particularly attractive to shops that need a compact CNC lathe capable of completing more than basic turning operations. The C-axis and live tooling can reduce secondary setups and improve the positional relationship between turned and cross-machined features.
Because these machines are older, buyers should pay particular attention to the condition of the CNC control, spindle, turret, live tooling, ball screws, guideways, hydraulic system, coolant system, and chip conveyor.
The live-tool system deserves particular attention. Buyers should verify that all driven-tool stations operate correctly, the live-tool spindle reaches its specified speed, C-axis positioning is accurate, and the turret indexes consistently.
For machines with Mazatrol T-32 or T-Plus controls, the condition of the CRT/display, control keyboard, hard drive or memory system, machine parameters, servo drives, and electrical cabinet should also be inspected before purchase.
HOW MUCH DOES A USED MAZAK SUPER QUICK TURN 15M COST?
Used MAZAK SUPER QUICK TURN 15M machines are generally inexpensive compared with newer Mazak turning centers because most available machines are from the 1990s. Current used-market evidence includes a 1991 SQT15M listed at approximately €6,500, while other used machines are offered on a request-for-quote basis.
A reasonable broad estimate for a used MAZAK SUPER QUICK TURN 15M is approximately $8,000–$25,000, depending on year, condition, control, spindle condition, turret condition, live tooling, chuck, tailstock, chip conveyor, tooling, and whether the machine can be demonstrated under power.
A basic older machine requiring electrical or mechanical work may fall below this range, while a clean, running machine with a good Mazatrol control, healthy spindle, functional live tooling, C-axis, tailstock, chip conveyor, tooling, and documented maintenance can command a premium.
Current listings demonstrate how widely configuration and condition can affect value. A 1991 machine is listed at €6,500, while other 1995–1997 Super Quick Turn 15M/Mark II machines are offered without published prices.
The most important factors affecting the value of an individual machine are year, exact SQT-15M configuration, Mazatrol control generation, spindle condition, spindle hours, turret condition, live-tooling condition, C-axis accuracy, chuck, tailstock, chip conveyor, tooling, machine geometry, ball-screw condition, maintenance history, and whether the machine is available for inspection under power.
