USED DOOSAN PUMA 480 – 2012
The DOOSAN PUMA 480 – 2012 is a heavy-duty CNC horizontal turning center designed for machining large-diameter and long workpieces. The PUMA 480 combines a rigid slant-bed construction with a large spindle bore, high spindle power, substantial swing capacity, and a FANUC CNC control. Documented 2012 machines are available in configurations with either 10- or 12-station turrets, depending on the individual machine.
The machine provides a maximum turning diameter of approximately 650 mm (25.6 in) and a maximum turning length of approximately 992 mm (39.1 in) on the documented 2012 U.S. configuration. Its large spindle bore and 165 mm (6.5 in) bar capacity make it particularly suitable for large shafts, sleeves, rings, flanges, and other heavy-duty components.
The documented 2012 U.S. machine uses a 60 HP spindle motor, a 24-inch Samchully 3-jaw power chuck, 1,500 RPM maximum spindle speed, FANUC Series 32i Model A control, tailstock, chip conveyor, and tool setter. Another documented 2012 PUMA 480 configuration uses a 45 kW spindle, 525 mm chuck, 10-station turret, and FANUC Series 32i Model A control.
With its large work envelope, powerful spindle, large chuck, and substantial bar capacity, the used DOOSAN PUMA 480 can be suited to manufacturers producing heavy industrial components, shafts, sleeves, hydraulic components, oil and gas parts, machinery components, and other large precision-turned parts.
DOOSAN PUMA 480 2012 – AXIS
| Specification | Details |
|---|---|
| Machine Configuration | 2-Axis CNC Horizontal Turning Center |
| X Axis Travel | 14.3 in / 362 mm |
| Z Axis Travel | 43.5 in / 1,105 mm |
| CNC Control | FANUC Series 32i Model A |
| Turret | 10 or 12 Station, Configuration Dependent |
| Chuck | 24 in on documented U.S. machine |
| Tailstock | Yes |
| Machine Construction | Slant Bed |
The documented U.S. 2012 configuration specifies 14.3 inches of X-axis travel and 43.5 inches of Z-axis travel, while the European 2012 configuration lists 362 mm X travel and 1,105 mm Z travel.
DOOSAN PUMA 480 2012 – AXIS TRAVELS / WORK ENVELOPE
| Specification | Details |
|---|---|
| X Axis Travel | 14.3 in / 362 mm |
| Z Axis Travel | 43.5 in / 1,105 mm |
| Maximum Swing | 35.4 in / 900 mm |
| Maximum Turning Diameter | 26 in / 650 mm |
| Maximum Turning Length | 39.1 in / 992 mm |
| Distance Between Centers | 44.7 in / 1,135 mm |
| Swing Over Cross-Slide | Approximately 28.3 in / 720 mm |
The large swing and turning envelope allow the PUMA 480 to accommodate substantially larger workpieces than conventional production CNC lathes. The exact 2012 U.S. listing specifies a 35.4-inch maximum swing and 26-inch maximum turning diameter.
DOOSAN PUMA 480 2012 – CAPACITY
| Specification | Details |
|---|---|
| Maximum Turning Diameter | 26 in / 650 mm |
| Maximum Turning Length | 39.1 in / 992 mm |
| Spindle Bore | 6.5 in / 165 mm on documented machine |
| Maximum Bar Capacity | 6.5 in / 165 mm |
| Chuck Size | 24 in / 610 mm on documented U.S. machine |
| Chuck | Samchully 3-Jaw Power Chuck |
| Tailstock | Yes |
| Tailstock Taper | MT6 on documented configuration |
The large spindle bore and bar capacity are key features of the PUMA 480. One 2012 machine is specifically documented with a 525 mm chuck and 165 mm bar-working capacity, while the U.S. machine has a 24-inch chuck and 6.5-inch bar capacity.
DOOSAN PUMA 480 2012 – SPINDLE
| Specification | Details |
|---|---|
| Spindle Motor | 60 HP / 45 kW, Configuration Dependent |
| Maximum Spindle Speed | 1,500 RPM |
| Spindle Bore | Approximately 165 mm / 6.5 in |
| Spindle Nose | A1-15 |
| Chuck Size | 24 in on documented U.S. machine |
| Spindle Type | Heavy-Duty CNC Turning Spindle |
The 2012 U.S. machine is listed with a 60 HP spindle motor, while another documented 2012 machine specifies a 45 kW spindle motor. Both configurations have a maximum spindle speed of 1,500 RPM.
DOOSAN PUMA 480 2012 – MILLING SPINDLE
| Specification | Details |
|---|---|
| Milling Spindle | Not Standard |
| Primary Machining | CNC Turning |
| Driven Tooling | Configuration Dependent |
| Milling Capability | Optional / Model Configuration Dependent |
| Spindle Speed | 1,500 RPM Main Spindle |
| BMT Milling Turret | Available as an option on PUMA 480 model family |
The standard PUMA 480 is primarily configured as a heavy-duty turning center. The PUMA 480 model family was also offered with a BMT75P milling turret for additional machining operations, so driven-tool or milling capability should be confirmed on the individual 2012 machine.
DOOSAN PUMA 480 2012 – TOOL CHANGER
| Specification | Details |
|---|---|
| Turret Type | Automatic CNC Turret |
| Turret Capacity | 10 or 12 Stations |
| U.S. Documented Configuration | 12 Station |
| European Documented Configuration | 10 Station |
| Tool Size | 32 x 32 mm on documented configuration |
| Tool Setter | Yes |
| Tooling | Turning Tooling |
The 2012 PUMA 480 was available with different turret configurations. The U.S. machine currently documented has a 12-station turret, while another exact 2012 machine has a 10-station turret with 32 x 32 mm tool capacity.
DOOSAN PUMA 480 2012 – CONTROL SYSTEM
| Specification | Details |
|---|---|
| CNC Control | FANUC Series 32i Model A |
| Control Manufacturer | FANUC |
| Axis Control | 2-Axis Turning |
| CNC Programming | Yes |
| Tool Setter Interface | Yes |
| Control Configuration | Configuration Dependent |
The documented 2012 U.S. PUMA 480 is equipped with a FANUC Series 32i Model A CNC control. Another exact 2012 machine also identifies the same FANUC 32i Model A control.
DOOSAN PUMA 480 2012 – COOLANT / CHIP MANAGEMENT
| Specification | Details |
|---|---|
| Chip Conveyor | Yes |
| Coolant System | Yes |
| Tool Setter | Yes |
| Oil Mist Filter | Yes on documented configuration |
| Chip Removal | Conveyor |
| Production Support | Heavy-Duty Turning |
Documented 2012 PUMA 480 machines are equipped with chip conveyors. One European machine also includes an oil mist filter, while the U.S. machine includes a chip conveyor and tool setter.
DOOSAN PUMA 480 2012 – POWER REQUIREMENTS
| Specification | Details |
|---|---|
| Spindle Motor | 60 HP / 45 kW |
| Main Spindle Speed | 1,500 RPM |
| Electrical Connection | Configuration Dependent |
| Documented European Voltage | 400 V |
| CNC Control | FANUC Series 32i Model A |
| Installation Power | Verify Individual Machine |
The documented European 2012 PUMA 480 specifies a 400 V electrical connection, while the spindle is listed at 45 kW. Electrical requirements can differ by machine configuration and installation location, so the machine nameplate and electrical documentation should be checked before installation.
DOOSAN PUMA 480 2012 – DIMENSIONS
| Specification | Details |
|---|---|
| Length | 5,250 mm / 206.7 in on documented machine |
| Width | 2,017 mm / 79.4 in |
| Height | 2,200 mm / 86.6 in |
| Machine Weight | 8,600 kg / 18,960 lb |
| Alternate Documented Weight | 10,100 kg / 22,267 lb |
| Installation Footprint | Verify Individual Machine |
The exact 2012 European machine with the 525 mm chuck is documented at 5,250 x 2,017 x 2,200 mm and approximately 8,600 kg. Another 2012 listing gives a weight of 10,100 kg, demonstrating that machine configuration and equipment can affect overall weight.
DOOSAN PUMA 480 2012 – GENERAL INFORMATION
| Specification | Details |
|---|---|
| Manufacturer | DOOSAN |
| Model | PUMA 480 |
| Year | 2012 |
| Machine Type | CNC Horizontal Turning Center |
| Configuration | 2-Axis |
| Maximum Swing | 35.4 in / 900 mm |
| Maximum Turning Diameter | 26 in / 650 mm |
| Maximum Turning Length | 39.1 in / 992 mm |
| X Travel | 14.3 in / 362 mm |
| Z Travel | 43.5 in / 1,105 mm |
| Spindle Speed | 1,500 RPM |
| Spindle Motor | 60 HP / 45 kW |
| Bar Capacity | 6.5 in / 165 mm |
| Chuck | 24 in / 525–610 mm, Configuration Dependent |
| CNC Control | FANUC 32i Model A |
| Turret | 10 or 12 Station |
| Tailstock | Yes |
| Chip Conveyor | Yes |
| Tool Setter | Yes |
| Oil Mist Filter | Configuration Dependent |
The PUMA 480 model family is designed as a large-capacity turning center for heavy-duty cutting and large-diameter workpieces.
INDUSTRIES THAT USE DOOSAN PUMA 480
The DOOSAN PUMA 480 is suited to industries that require large-capacity CNC turning for heavy and oversized components. Its large spindle bore, substantial swing, high spindle power, and long turning envelope make it appropriate for demanding machining applications.
Common industries and applications include:
- Oil and gas equipment
- Heavy equipment manufacturing
- Industrial machinery
- Automotive and transportation
- Hydraulic equipment
- Power generation
- Mining equipment
- Agricultural machinery
- General engineering
- Large contract machining
The machine’s 650 mm maximum turning diameter and approximately 992 mm turning length make it suitable for producing large shafts, sleeves, rings, housings, and other cylindrical components.
TYPICAL PARTS DOOSAN PUMA 480 CAN PRODUCE
The PUMA 480 can be used to manufacture a wide range of large precision-turned components, including:
- Large shafts
- Drive shafts
- Hydraulic cylinders
- Sleeves
- Bushings
- Flanges
- Rings
- Bearing housings
- Valve bodies
- Oil and gas components
- Pump components
- Gear blanks
- Heavy machinery components
- Industrial housings
Its large spindle bore also allows long bar stock and large-diameter material to be accommodated through the spindle, while the tailstock can provide additional support for longer workpieces.
WHY CHOOSE DOOSAN PUMA 480
The DOOSAN PUMA 480 is designed around large-capacity, heavy-duty CNC turning. Its combination of a 35.4-inch swing, approximately 26-inch maximum turning diameter, 39.1-inch turning length, 6.5-inch bar capacity, and powerful spindle provides substantial machining capacity for large components.
The FANUC 32i Model A control, automatic turret, tailstock, chip conveyor, and tool setter provide the features needed for repeatable production turning. The availability of different chuck, turret, and tooling configurations also means buyers can select a used PUMA 480 based on the specific requirements of their production work.
WHY BUY USED DOOSAN PUMA 480
Buying a used DOOSAN PUMA 480 can give manufacturers access to a large-capacity CNC turning center without the capital investment associated with a new heavy-duty machine. Its large spindle bore and work envelope make it particularly useful for shops that need to turn components too large for conventional production lathes.
Many used machines include valuable options such as:
- FANUC Series 32i Model A CNC control
- 24-inch power chuck
- 525 mm chuck
- Tailstock
- Chip conveyor
- Tool setter
- Oil mist filtration
- EZ Guide
- Turning tooling
- Large spindle bore
- 10- or 12-station turret
Before purchasing, buyers should inspect the spindle, chuck, hydraulic system, tailstock, turret indexing, ballscrews, guideways, FANUC control, chip conveyor, coolant system, tool setter, and machine geometry. The exact configuration and condition can vary substantially between individual used PUMA 480 machines.
HOW MUCH DOES A USED DOOSAN PUMA 480 COST?
A current U.S. listing for a 2012 DOOSAN PUMA 480 is advertised at $89,900 USD. The machine is equipped with a 24-inch chuck, 60 HP spindle, 6.5-inch bar capacity, 12-station turret, FANUC 32i Model A control, tailstock, chip conveyor, and tool setter.
Other exact 2012 PUMA 480 machines are being offered at price on request, so $89,900 should be treated as a current individual asking price rather than a fixed market value.
The final value of a used PUMA 480 can vary based on spindle condition, hours, chuck size, turret configuration, control condition, tailstock, tooling, chip conveyor, oil mist filtration, service history, and overall machine condition.
Related Products
-
DOOSAN - LYNX 220LC
VIEW MACHINE -
DOOSAN - S280
VIEW MACHINE -
DOOSAN - HM 1000
VIEW MACHINE -
DOOSAN - NHM 8000
VIEW MACHINE