MAZAK QT-EZ 10MSY – 2024
USED MAZAK QT-EZ 10MSY – 2024
The MAZAK QT-EZ 10MSY – 2024 is a modern multi-tasking CNC turning center designed to combine turning, milling, Y-axis machining, and second-spindle operations in one machine. The MSY configuration provides a 10-inch main chuck, 6-inch second spindle, live tooling, Y-axis capability, and C-axis positioning, allowing manufacturers to complete multiple operations in a single setup. Mazak describes the QT-Ez 10MSY as a production-oriented machine for DONE IN ONE part processing.
The machine provides a maximum swing of approximately 27.4 inches and a maximum machining diameter of 13.5 inches, with a maximum machining length of approximately 21.85 inches according to Mazak’s QT-Ez Series specifications. The standard bar-work capacity is approximately 2.5 inches, making the machine suitable for a wide range of bar-fed turning applications.
The main spindle uses a 20 HP motor and reaches 4,200 RPM with the standard 10-inch chuck. The second spindle uses a 10 HP motor and reaches 6,000 RPM, while the live-tooling spindle provides 7.5 HP and 6,000 RPM. This combination gives the QT-Ez 10MSY substantial capability for turning, milling, drilling, tapping, cross-hole machining, and transferring parts between spindles.
The 2024 machine is also equipped with Mazak’s SmoothEz CNC system and a 15-inch color touchscreen. Standard control features include MAZATROL programming, G-code EIA/ISO capability, Y-axis control, main/sub-spindle synchronization, intelligent thermal compensation, and milling-spindle synchronous tapping.
A documented late-2024 example has only 637 cutting hours and includes a Y-axis, live tooling, second spindle, 12-position turret, Mazatrol SmoothEz control, LNS Quick Load Servo 80+ bar feeder, automatic parts catcher, high-pressure coolant, tooling, collet systems, chip conveyor, and additional automation equipment. That machine is currently advertised at $220,000.
MAZAK QT-EZ 10MSY – 2024 – AXIS
The MAZAK QT-EZ 10MSY – 2024 is configured around X-, Y-, and Z-axis linear movement, with the main and second spindles providing additional C-axis functionality for multi-tasking operations. The Y-axis allows off-centerline milling and drilling, while the second spindle supports part transfer and DONE IN ONE machining.
| AXIS | SPECIFICATION |
|---|---|
| X Axis Travel | 8.5 inches / 215 mm |
| Y Axis Travel | 4.00 inches / 100 mm |
| Z Axis Travel | 23.75 inches / 605 mm |
| W Axis | Approximately 23 inches on MSY configuration |
| Main C Axis | 0.0001° positioning/contouring |
| Second C Axis | 0.0001° positioning/contouring |
| Machine Configuration | Turning + milling + Y-axis + second spindle |
The combination of Y-axis movement and live tooling allows machining operations that would otherwise require a separate milling machine.
MAZAK QT-EZ 10MSY – 2024 – AXIS TRAVELS / WORK ENVELOPE
The QT-Ez 10MSY provides approximately 8.5 inches of X-axis travel, 4 inches of Y-axis travel, and 23.75 inches of Z-axis travel. The maximum swing is approximately 27.4 inches, while maximum machining diameter is approximately 13.5 inches.
| WORK ENVELOPE | SPECIFICATION |
|---|---|
| Maximum Swing | 27.4 inches |
| Maximum Machining Diameter | 13.5 inches |
| Maximum Machining Length | 21.85 inches |
| X-Axis Travel | 8.5 inches |
| Y-Axis Travel | 4.00 inches |
| Z-Axis Travel | 23.75 inches |
| W-Axis Travel | Approximately 23 inches |
| Main Chuck | 10 inches |
| Second Chuck | 6 inches |
The machine’s work envelope is optimized for production-sized components rather than extremely large turning applications, with the Y-axis and second spindle adding significant process flexibility.
MAZAK QT-EZ 10MSY – 2024 – CAPACITY
The QT-Ez 10MSY is designed around a 10-inch main chuck and 6-inch second chuck. Its standard bar capacity is approximately 2.5 inches, while the maximum support weight is approximately 440 pounds for chuck work and 1,100 pounds for shaft work.
| CAPACITY | SPECIFICATION |
|---|---|
| Main Chuck | 10 inches |
| Second Chuck | 6 inches |
| Maximum Swing | 27.4 inches |
| Maximum Machining Diameter | 13.5 inches |
| Maximum Machining Length | 21.85 inches |
| Bar Capacity | 2.5 inches |
| Maximum Chuck Workpiece Support | 440 lbs |
| Maximum Shaft Workpiece Support | 1,100 lbs |
The combination of bar capacity, dual spindles, and Y-axis milling makes the machine particularly suitable for high-volume production of complex turned-and-milled components.
MAZAK QT-EZ 10MSY – 2024 – MAIN SPINDLE
The main spindle uses an integrated motor headstock with a 20 HP motor and a maximum speed of 4,200 RPM when configured with the standard 10-inch chuck. The spindle uses an A2-6 nose and has a documented 2.99-inch spindle bore.
| MAIN SPINDLE | SPECIFICATION |
|---|---|
| Motor | 20 HP |
| Maximum Speed | 4,200 RPM |
| Standard Chuck | 10 inches |
| Spindle Nose | A2-6 |
| Spindle Bore | 2.99 inches / 76 mm |
| Maximum Torque | Approximately 143.8 ft-lbs |
| C-Axis | 0.0001° positioning/contouring |
The integral motor spindle design reduces mechanical transmission components and supports responsive spindle operation for both turning and C-axis milling applications.
MAZAK QT-EZ 10MSY – 2024 – SECOND SPINDLE
The second spindle is a major component of the MSY configuration. It provides a 6-inch chuck, 6,000 RPM maximum speed, and 10 HP motor, allowing parts to be transferred from the main spindle and machined from the opposite side.
| SECOND SPINDLE | SPECIFICATION |
|---|---|
| Chuck Size | 6 inches |
| Motor | 10 HP |
| Maximum Speed | 6,000 RPM |
| Spindle Bore | 2.08 inches / 53 mm |
| Spindle Nose | A2-5 |
| Maximum Torque | Approximately 39 ft-lbs |
| C2-Axis | 0.0001° positioning/contouring |
| Application | DONE IN ONE machining |
The second spindle can reduce the need for manual part transfers and secondary setups, improving production flow for components requiring machining on both ends.
MAZAK QT-EZ 10MSY – 2024 – MILLING SPINDLE
The machine’s rotary-tool system provides 7.5 HP and 6,000 RPM, allowing milling, drilling, tapping, and other driven-tool operations to be performed directly on the turning center.
| MILLING SPINDLE | SPECIFICATION |
|---|---|
| Motor | 7.5 HP |
| Maximum Speed | 6,000 RPM |
| Tooling | Rotary/live tooling |
| Turret | 12-position |
| Interface | Bolt-on rotary tooling / BMT55 options |
| Application | Milling, drilling and tapping |
The live-tooling system allows the QT-Ez 10MSY to perform milling operations without moving the workpiece to a separate vertical machining center.
MAZAK QT-EZ 10MSY – 2024 – TOOL TURRET
The QT-Ez 10MSY uses a 12-position drum turret designed for rotary-tool applications. Mazak specifies a bolt-on turret configuration with substantial clamping torque, while a BMT55 interface is available as an option.
| TOOL TURRET | SPECIFICATION |
|---|---|
| Turret Type | 12-position drum turret |
| Tool Positions | 12 |
| Rotary Tool Speed | 6,000 RPM |
| Rotary Tool Motor | 7.5 HP |
| Standard Interface | Bolt-on type |
| Optional Interface | BMT55 |
| Turret Clamp Torque | Approximately 1,039 ft-lbs |
The 12-position turret provides sufficient tool capacity for many multi-operation turning and milling programs while maintaining a compact machine footprint.
MAZAK QT-EZ 10MSY – 2024 – CONTROL SYSTEM
The QT-Ez 10MSY uses the MAZATROL SmoothEz CNC system with a 15-inch color touchscreen. The control is designed around interactive MAZATROL programming while also supporting EIA/ISO G-code programming.
| CONTROL SYSTEM | SPECIFICATION |
|---|---|
| CNC Control | MAZATROL SmoothEz |
| Display | 15-inch color touchscreen |
| Programming | MAZATROL / EIA/ISO |
| Main/Sub Synchronization | Standard |
| Y-Axis Control | Standard |
| Milling-Spindle Synchronous Tapping | Standard |
| Thermal Compensation | Intelligent Thermal Shield |
| Connectivity | LAN / USB / SD |
| Program Capacity | 2 MB standard, expandable options |
The control includes programming and machining functions designed specifically for modern multi-tasking turning applications.
MAZAK QT-EZ 10MSY – 2024 – RAPID TRAVERSE AND MOTION
The machine provides rapid axis movement of approximately 1,181 IPM in X, 394 IPM in Y, and 1,417 IPM in Z. These rapid rates help reduce positioning time between turning, milling, drilling, and second-spindle operations.
| MOTION | SPECIFICATION |
|---|---|
| X-Axis Rapid | 1,181 IPM |
| Y-Axis Rapid | 394 IPM |
| Z-Axis Rapid | 1,417 IPM |
| X Travel | 8.5 inches |
| Y Travel | 4 inches |
| Z Travel | 23.75 inches |
| Guide System | Hybrid MX roller guide system |
Mazak’s hybrid roller guide system is designed to provide rigidity while supporting rapid axis movement and precision positioning.
MAZAK QT-EZ 10MSY – 2024 – COOLANT & CHIP MANAGEMENT
The QT-Ez 10MSY provides a standard coolant system and supports higher-pressure coolant options, including Mazak SuperFlow systems. A documented 2024 machine includes a high-pressure coolant system rated at approximately 118 PSI and 16 GPM.
| COOLANT & CHIP MANAGEMENT | SPECIFICATION |
|---|---|
| Standard Coolant | 20 PSI / 8 GPM |
| High-Power Coolant Option | 59 PSI / 13 GPM |
| High-Power Coolant Option | 118 PSI / 16 GPM |
| SuperFlow Option | Up to 1,000 PSI |
| Chip Conveyor | Available / documented on equipped machine |
| Mist Collector | Available |
| Oil Skimmer | Available |
| Chip Guard | Full coverage |
The high-pressure coolant capability is particularly useful for deep-hole drilling, milling, difficult materials, and operations requiring improved chip evacuation.
MAZAK QT-EZ 10MSY – 2024 – BAR FEEDER & AUTOMATION
The QT-Ez 10MSY is designed to integrate with bar feeders, automatic parts catchers, robots, and other automation equipment. A documented 2024 machine includes an LNS Quick Load Servo 80+ bar feeder and automatic parts catcher.
| AUTOMATION | SPECIFICATION |
|---|---|
| Bar Feeder | LNS Quick Load Servo 80+ on documented machine |
| Parts Catcher | Automatic |
| Robot Integration | Supported |
| Bar Length on Documented Machine | Up to 48 inches |
| Workpiece Conveyor | Available |
| Automation Application | Unattended / lights-out production |
Automation can significantly improve productivity for repetitive bar-fed production, especially when the machine is equipped with parts collection and conveyor systems.
MAZAK QT-EZ 10MSY – 2024 – MACHINE CONSTRUCTION
The QT-Ez series uses a high-rigidity machine structure, integrated spindle designs, roller guides on the linear axes, and pre-tensioned ballscrews supported at both ends. Mazak also incorporates thermal displacement control to help manage dimensional changes during operation.
| CONSTRUCTION | SPECIFICATION |
|---|---|
| Machine Structure | High-rigidity |
| Spindle Design | Integrated motor headstock |
| Axis Guides | Hybrid MX roller guides |
| Ball Screws | Pre-tensioned |
| Thermal Control | Intelligent Thermal Shield |
| C-Axis Resolution | 0.0001° |
| Enclosure | Full chip and coolant coverage |
These construction features are intended to provide rigidity, repeatability, and thermal stability during continuous production.
MAZAK QT-EZ 10MSY – 2024 – POWER REQUIREMENTS
The QT-Ez 10MSY uses a 20 HP main spindle, 10 HP second spindle, and 7.5 HP milling spindle. Mazak specifies a standard 200-230 V power supply for the machine, with a separate transformer option for higher-voltage facilities.
| POWER | SPECIFICATION |
|---|---|
| Main Spindle | 20 HP |
| Second Spindle | 10 HP |
| Milling Spindle | 7.5 HP |
| Standard Power Supply | 200-230 V |
| Phase | Industrial 3-phase configuration |
| Transformer Option | 380-480 V |
| Installation | Verify individual machine nameplate |
Electrical requirements should be confirmed for the exact 2024 machine before transportation and installation.
MAZAK QT-EZ 10MSY – 2024 – DIMENSIONS & WEIGHT
The QT-Ez 10MSY has a relatively compact footprint considering its multi-tasking capabilities. The documented machine specifications list approximately 109.1 inches in length, 75 inches in depth, and 67.9 inches in height, with a machine weight of approximately 12,260 pounds.
| DIMENSIONS & WEIGHT | SPECIFICATION |
|---|---|
| Machine Length | 109.1 inches |
| Machine Depth | 75 inches |
| Machine Height | 67.9 inches |
| Machine Weight | Approximately 12,260 lbs |
| Approx. Metric Weight | 5,561 kg |
| Installation | Industrial floor installation |
The actual shipping envelope can increase when a chip conveyor, bar feeder, automation equipment, or other accessories are included.
MAZAK QT-EZ 10MSY – 2024 – GENERAL INFORMATION
The MAZAK QT-EZ 10MSY – 2024 is a multi-tasking CNC turning center combining a main spindle, second spindle, Y-axis, C-axis capability, live tooling, and a 12-position turret. The machine is designed to consolidate multiple machining processes into one production platform.
| GENERAL INFORMATION | SPECIFICATION |
|---|---|
| Manufacturer | MAZAK |
| Model | QT-EZ 10MSY |
| Year | 2024 |
| Machine Type | CNC Multi-Tasking Turning Center |
| Main Chuck | 10 inches |
| Second Chuck | 6 inches |
| Maximum Swing | 27.4 inches |
| Maximum Machining Diameter | 13.5 inches |
| Maximum Machining Length | 21.85 inches |
| Bar Capacity | 2.5 inches |
| Main Spindle | 20 HP / 4,200 RPM |
| Second Spindle | 10 HP / 6,000 RPM |
| Milling Spindle | 7.5 HP / 6,000 RPM |
| Tool Positions | 12 |
| X/Y/Z Travel | 8.5 / 4 / 23.75 inches |
| Control | MAZATROL SmoothEz |
| Machine Weight | Approximately 12,260 lbs |
A documented late-2024 machine includes extensive additional equipment, including an LNS Quick Load Servo 80+ bar feeder, automatic parts catcher, high-pressure coolant, chip conveyor, mist collector, quick-change collets, Kitagawa chucks, and extensive Mazak/WTO tooling.
INDUSTRIES THAT USE MAZAK QT-EZ 10MSY – 2024
The QT-Ez 10MSY is particularly suited to industries that require high production rates and complex turned-and-milled components.
| INDUSTRY | TYPICAL APPLICATION |
|---|---|
| Automotive | Shafts, fittings and drivetrain components |
| Aerospace | Precision turned and milled components |
| Medical | Complex small-to-medium components |
| Oil & Gas | Fittings, connectors and valves |
| Industrial Equipment | Shafts, couplings and housings |
| Hydraulics | Valve bodies and fittings |
| Robotics | Precision mechanical components |
| Electronics | Housings and precision connectors |
| General Manufacturing | Production turned parts |
| Job Shops | Complex short- and medium-run work |
The second spindle and Y-axis are particularly useful for manufacturers seeking to reduce secondary operations.
TYPICAL PARTS MAZAK QT-EZ 10MSY – 2024 CAN PRODUCE
The machine can manufacture complex components requiring turning, milling, drilling, tapping, cross-hole machining, and second-side operations.
| PART TYPE | EXAMPLES |
|---|---|
| Shafts | Precision drive and transmission shafts |
| Fittings | Hydraulic and pneumatic fittings |
| Valve Components | Valve bodies and stems |
| Bushings | Precision bushings |
| Couplings | Mechanical couplings |
| Flanges | Small and medium flanges |
| Connectors | Industrial connectors |
| Housings | Precision cylindrical housings |
| Pins | Turned and cross-drilled pins |
| Complex Multi-Side Parts | Components requiring second-side machining |
The machine’s DONE IN ONE capability can reduce the number of secondary setups required for suitable parts.
WHY CHOOSE MAZAK QT-EZ 10MSY – 2024
The MAZAK QT-EZ 10MSY – 2024 combines several machining functions in one platform. Instead of transferring a component between a turning center and separate milling equipment, suitable parts can be turned, milled, drilled, tapped, and transferred to the second spindle within one production cycle.
| FEATURE | BENEFIT |
|---|---|
| Main + Second Spindle | Enables DONE IN ONE machining |
| Y-Axis | Allows off-centerline milling |
| Live Tooling | Performs milling and drilling |
| 10-Inch Main Chuck | Provides substantial workholding capacity |
| 6-Inch Second Chuck | Supports second-side machining |
| 20 HP Main Spindle | Strong turning capability |
| 10 HP Second Spindle | Supports secondary operations |
| 7.5 HP Live Tooling | Supports milling and drilling |
| 12-Position Turret | Provides multiple tooling stations |
| SmoothEz Control | Modern touchscreen CNC interface |
| 0.0001° C-Axis | High-resolution spindle positioning |
| Automation Integration | Supports unattended production |
For manufacturers with high volumes of complex turned-and-milled parts, these capabilities can reduce handling, setup time, and the number of machines required per component.
WHY BUY USED MAZAK QT-EZ 10MSY – 2024
Buying a used MAZAK QT-EZ 10MSY – 2024 can provide access to a very recent multi-tasking CNC platform while avoiding the full acquisition cost of a new machine. Because the QT-Ez 10MSY combines turning, Y-axis milling, live tooling, and second-spindle operations, it can replace multiple operations that would otherwise require separate machines.
The 2024 model is also attractive to shops looking for modern CNC controls and automation compatibility. The MAZATROL SmoothEz control uses a 15-inch touchscreen and supports interactive MAZATROL programming as well as EIA/ISO programming. LAN, USB, thermal compensation, Y-axis control, and spindle synchronization are part of the documented configuration.
A late-2024 machine currently advertised with only 637 cutting hours is equipped with a second spindle, Y-axis, live tooling, bar feeder, automatic parts catcher, high-pressure coolant, extensive tooling, collets, and other automation equipment. It is advertised at $220,000, demonstrating the premium that a very low-hour, highly equipped machine can command.
Before purchasing a used 2024 QT-Ez 10MSY, buyers should verify spindle hours and cutting hours, inspect both spindles, test Y-axis movement, verify C-axis positioning, check turret indexing, inspect live-tool holders, test the SmoothEz control, inspect coolant and chip-management systems, and confirm all included tooling and automation equipment.
HOW MUCH DOES A USED MAZAK QT-EZ 10MSY – 2024 COST?
The used market for a 2024 MAZAK QT-EZ 10MSY is relatively limited because the model is still a recent machine. Current market evidence includes a late-2024 example with only 637 cutting hours advertised at $220,000, equipped with Y-axis, live tooling, second spindle, 12-position turret, SmoothEz control, bar feeder, automatic parts catcher, high-pressure coolant, tooling, and automation equipment.
A machine with significantly higher hours or fewer accessories would normally be expected to sell below a very low-hour, fully equipped example. Conversely, a machine with a bar feeder, extensive tooling, automatic parts catcher, chip conveyor, TSC, mist collector, and production automation can command a substantial premium.
| CONDITION | ESTIMATED USED PRICE |
|---|---|
| High Hours / Basic Configuration | $125,000-$145,000 |
| Running / Average Condition | $145,000-$165,000 |
| Good Condition | $165,000-$185,000 |
| Excellent Condition | $185,000-$205,000 |
| Very Low Hour / Well Equipped | $205,000-$225,000+ |
| Best Estimated Listing Value | $185,000-$215,000 |
A MAZAK QT-EZ 10MSY – 2024 in excellent condition with low hours, Y-axis, second spindle, live tooling, SmoothEz control, chip conveyor, coolant system, and useful tooling could reasonably be positioned around $185,000-$215,000.
A very low-hour machine with extensive automation and tooling can be listed higher. The documented late-2024 example at $220,000 with only 637 cutting hours provides a current upper-market reference for a highly equipped machine.
For a standard used 2024 machine without an unusually large automation or tooling package, a target listing around $185,000-$200,000 would provide a more moderate market position, while a premium package can justify an asking price around or above $210,000.
Related Products
-
MAZAK - VCN-700D
VIEW MACHINE -
MAZAK - QUICK TURN NEXUS 250MS
VIEW MACHINE -
MAZAK - INTEGREX I200S
VIEW MACHINE -
MAZAK - VTC-530/20
VIEW MACHINE