USED HAAS DT-2 – 2022

The HAAS DT-2 2022 is a high-speed CNC Drill/Tap Center designed for rapid drilling, tapping, milling, pocketing, contouring, and precision production machining. The DT-2 is built around a compact but rigid machining platform with fast linear-axis movement, a high-speed spindle, and a side-mount automatic tool changer. It is particularly useful for manufacturers that need short cycle times and high productivity from a machine with a relatively small footprint.

The 2022 HAAS DT-2 provides approximately 28″ (711 mm) of X-axis travel, 16″ (406 mm) of Y-axis travel, and 15.5″ (394 mm) of Z-axis travel. Its approximately 32″ × 18″ worktable provides useful capacity for fixtures, vises, small and medium-sized production components, and multiple-part setups. The machine is commonly equipped with a CAT40 or BT40 spindle, 15,000 RPM direct-drive spindle, approximately 15 HP spindle motor, and 20+1 side-mount automatic tool changer.

The DT-2 is designed around high-speed production, with X, Y, and Z rapid traverse rates of approximately 2,400 IPM (61 m/min). The machine can be equipped with rigid tapping, high-speed machining, wireless probing, Haas Next Generation Control, Ethernet, Wi-Fi, HaasConnect, HaasDrop, programmable coolant, chip auger, through-spindle coolant, and fourth-axis drive and wiring, depending on the individual 2022 configuration.

The HAAS DT-2 2022 is an excellent choice for manufacturers producing aerospace brackets, automotive components, medical parts, electronic housings, precision fixtures, hydraulic components, tooling components, and other smaller precision parts requiring high-speed drilling, tapping, and milling.

---

HAAS DT-2 2022 – AXIS

Specification	Value
X Axis	711 mm (28″)
Y Axis	406 mm (16″)
Z Axis	394 mm (15.5″)
Machine Configuration	CNC Drill/Tap Center
Axis Configuration	3-Axis
Fourth Axis	Configuration Dependent
Spindle Position	Vertical
Guideway Configuration	Linear

---

HAAS DT-2 2022 – AXIS TRAVELS / WORK ENVELOPE

Specification	Value
X Axis Travel	28″ (711 mm)
Y Axis Travel	16″ (406 mm)
Z Axis Travel	15.5″ (394 mm)
Table Length	Approximately 32″
Table Width	Approximately 18″
Spindle Nose to Table – Maximum	Configuration Dependent
Spindle Nose to Table – Minimum	Configuration Dependent
T-Slot Width	Approximately 5/8″
Standard T-Slots	Configuration Dependent
Maximum Table Load	Approximately 500 lbs
Fourth-Axis Capability	Configuration Dependent

---

HAAS DT-2 2022 – CAPACITY

Specification	Value
Machine Type	CNC Drill/Tap Center
Table Size	Approximately 32″ × 18″
Maximum Table Load	Approximately 500 lbs
X-Axis Travel	28″
Y-Axis Travel	16″
Z-Axis Travel	15.5″
Spindle Taper	CAT40 / BT40
Spindle Speed	15,000 RPM
Spindle Motor	Approximately 15 HP
Tool Capacity	20+1 Tools
Number of Axes	3
Fourth Axis	Configuration Dependent
Rigid Tapping	Yes
High-Speed Machining	Yes

---

HAAS DT-2 2022 – SPINDLE

Specification	Value
Main Spindle Speed	15,000 RPM
Optional High-Speed Spindle	20,000 RPM, Configuration Dependent
Spindle Motor	Approximately 15 HP
Spindle Taper	CAT40 / BT40
Drive System	Inline Direct Drive
Maximum Torque	Configuration Dependent
Spindle Orientation	Yes
Rigid Tapping	Yes
Spindle Cooling	Configuration Dependent
Through-Spindle Coolant	Configuration Dependent

The 15,000 RPM inline direct-drive spindle provides high-speed performance for drilling, tapping, small-tool milling, aluminum machining, and precision finishing. Higher-speed spindle configurations may also be available depending on the individual machine.

---

HAAS DT-2 2022 – TOOL CHANGER

Specification	Value
Tool Capacity	20+1 Tools
Tool Changer	Side-Mount Automatic Tool Changer
Tool Interface	CAT40 / BT40
Tool Selection	Automatic
Maximum Tool Diameter	Configuration Dependent
Maximum Tool Length	Configuration Dependent
Maximum Tool Weight	Approximately 12 lbs
Tool-to-Tool Time	Approximately 1.75 sec
Chip-to-Chip Time	Approximately 2.0 sec
Tool Management	Automatic

The 20+1 side-mount tool changer provides sufficient capacity for production programs requiring multiple drills, taps, end mills, boring tools, and finishing tools.

---

HAAS DT-2 2022 – FEEDRATES

Specification	Value
X Rapid Traverse	2,400 IPM / 61 m/min
Y Rapid Traverse	2,400 IPM / 61 m/min
Z Rapid Traverse	2,400 IPM / 61 m/min
Maximum Cutting Feed	Approximately 1,200 IPM / 30.5 m/min
X Maximum Thrust	Configuration Dependent
Y Maximum Thrust	Configuration Dependent
Z Maximum Thrust	Configuration Dependent
Feedrate Override	Yes
Rapid Override	Yes
High-Speed Positioning	Yes

The exceptionally fast rapid movement is particularly valuable for drill-and-tap production cycles involving frequent repositioning between holes.

---

HAAS DT-2 2022 – CONTROL SYSTEM

Specification	Value
CNC Control	Haas Next Generation Control
Programming	ISO G-Code
Conversational Programming	Yes
Tool Offset Management	Yes
Work Offset Management	Yes
Rigid Tapping	Yes
High-Speed Machining	Yes
Ethernet	Yes
Wi-Fi	Yes
HaasConnect	Yes
HaasDrop	Yes
Advanced Tool Management	Configuration Dependent
Program Memory	1 GB Standard
Safe Run	Configuration Dependent
Remote Monitoring	Yes

The Haas Next Generation Control provides a modern operating platform for production machining, programming, networking, diagnostics, and machine monitoring.

---

HAAS DT-2 2022 – FOURTH AXIS / ROTARY CAPABILITY

Specification	Value
Fourth-Axis Drive	Configuration Dependent
Fourth-Axis Wiring	Configuration Dependent
Rotary Table	Optional
Indexing Machining	Yes, When Equipped
Continuous Rotary Machining	Configuration Dependent
Multi-Sided Machining	Yes
Rotary Probing	Configuration Dependent
Simultaneous 4-Axis	Configuration Dependent

A DT-2 equipped with fourth-axis wiring can be paired with a compatible Haas rotary unit for indexed or continuous rotary machining.

---

HAAS DT-2 2022 – COOLANT / CHIP MANAGEMENT

Specification	Value
Flood Coolant	Standard
Coolant Tank	Approximately 55 Gallons
Coolant Pump	Standard
Variable Flow Coolant	Configuration Dependent
Chip Auger	Configuration Dependent
Through-Spindle Coolant	Configuration Dependent
High-Pressure Coolant	Configuration Dependent
Oil Skimmer	Configuration Dependent
Washdown	Configuration Dependent
Automatic Lubrication	Yes

The compact enclosure, coolant system, and optional chip auger are designed to support continuous production and reduce operator intervention.

---

HAAS DT-2 2022 – POWER REQUIREMENTS

Specification	Value
Electrical Supply	Three Phase
Low Voltage	220 VAC
High Voltage	440 VAC
Low-Voltage Full Load Amps	Configuration Dependent
High-Voltage Full Load Amps	Configuration Dependent
Air Requirement	Approximately 4 SCFM at 100 PSI
Minimum Air Pressure	80 PSI
Connected Load	Configuration Dependent
Transformer	Configuration Dependent

---

HAAS DT-2 2022 – DIMENSIONS

Specification	Value
Length	Approximately 103–115″
Width	Approximately 94–100″
Height	Approximately 98–103″
Machine Weight	Approximately 5,000–5,500 lbs
Floor Space	Configuration Dependent
Shipping Configuration	Configuration Dependent

The exact footprint and machine weight vary depending on chip-management equipment, coolant configuration, tooling, rotary equipment, and other installed options.

---

HAAS DT-2 2022 – GENERAL INFORMATION

Item	Details
Manufacturer	Haas Automation
Model	DT-2
Year	2022
Machine Type	CNC Drill/Tap Center
CNC Control	Haas Next Generation Control
X-Axis Travel	28″
Y-Axis Travel	16″
Z-Axis Travel	15.5″
Table Size	Approximately 32″ × 18″
Maximum Table Load	Approximately 500 lbs
Spindle Taper	CAT40 / BT40
Spindle Speed	15,000 RPM
Optional Spindle Speed	20,000 RPM
Spindle Motor	Approximately 15 HP
Tool Capacity	20+1
Rapid Traverse	2,400 IPM
Maximum Cutting Feed	Approximately 1,200 IPM
Rigid Tapping	Yes
High-Speed Machining	Yes
Fourth Axis	Configuration Dependent
WIPS Probing	Configuration Dependent
Chip Auger	Configuration Dependent
Through-Spindle Coolant	Configuration Dependent
HaasConnect	Yes
Wi-Fi	Yes

---

INDUSTRIES THAT USE HAAS DT-2 2022

The HAAS DT-2 2022 is well suited for industries requiring fast and repeatable drilling, tapping, milling, and precision production, including:

• Aerospace
• Automotive
• Medical
• Electronics
• Defense
• Robotics
• Industrial machinery
• Precision engineering
• Tool and die
• General manufacturing
• Job shops
• Contract manufacturing

Its high-speed spindle and extremely fast axis movement make it particularly useful for production environments with a large number of holes, taps, pockets, and short machining cycles.

---

TYPICAL PARTS HAAS DT-2 2022 CAN PRODUCE

The HAAS DT-2 2022 can manufacture:

• Aerospace brackets
• Automotive components
• Medical components
• Electronic housings
• Precision fixtures
• Mounting plates
• Tooling components
• Hydraulic components
• Robotics components
• Small machine housings
• Precision brackets
• Prototype components
• Small production parts

The machine can perform drilling, tapping, pocket milling, face milling, boring, reaming, contouring, profiling, chamfering, slotting, and high-speed finishing operations.

---

WHY CHOOSE HAAS DT-2 2022

The HAAS DT-2 2022 is an excellent choice for manufacturers looking for a compact, high-speed CNC machine designed around productivity. Its 28″ X-axis travel, 16″ Y-axis travel, 15.5″ Z-axis travel, 15,000 RPM spindle, and 20+1 tool changer provide a strong combination of machining flexibility and fast cycle times.

The machine is particularly effective for drill-and-tap applications because of its high-speed spindle and rapid axis movement. The 2,400 IPM rapid traverse rate minimizes positioning time between machining features and can significantly improve cycle efficiency on parts containing many holes.

The inline direct-drive spindle also provides good high-speed cutting characteristics for smaller tools and finishing operations. With options such as probing, fourth-axis capability, through-spindle coolant, chip auger, and programmable coolant, the DT-2 can be configured for a wide range of automated production requirements.

---

WHY BUY USED HAAS DT-2 2022

Purchasing a used HAAS DT-2 2022 allows manufacturers to acquire a relatively modern high-speed CNC Drill/Tap Center while reducing the capital investment compared with purchasing new equipment.

Many used machines may include valuable options such as:

• Haas Next Generation Control
• 15,000 RPM spindle
• 20,000 RPM high-speed spindle option
• Approximately 15 HP spindle motor
• CAT40 / BT40 tooling
• 20+1 side-mount tool changer
• Rigid tapping
• High-speed machining
• Wireless probing
• Fourth-axis drive and wiring
• Rotary-table capability
• Chip auger
• Through-spindle coolant
• High-pressure coolant
• Programmable coolant
• Oil skimmer
• HaasConnect
• HaasDrop
• Ethernet
• Wi-Fi
• Advanced Tool Management
• Complete CAT40 tooling package

Before purchasing, buyers should inspect the spindle, spindle bearings, CAT40 taper, drawbar, X/Y/Z-axis movement, ballscrews, linear guides, automatic tool changer, Haas control, probing system, coolant system, chip auger, lubrication system, electrical cabinet, and machine geometry.

Spindle hours, cutting hours, alarm history, previous crash history, maintenance records, tooling, and fourth-axis equipment should also be reviewed.

---

HOW MUCH DOES A USED HAAS DT-2 2022 COST?

The value of a used HAAS DT-2 2022 depends heavily on spindle hours, overall machine condition, spindle configuration, tool changer condition, probing, fourth-axis equipment, coolant configuration, chip management, tooling package, and maintenance history.

Machines equipped with low spindle hours, 15,000 or 20,000 RPM spindle, wireless probing, fourth-axis capability, chip auger, through-spindle coolant, high-pressure coolant, and complete CAT40 tooling generally command higher resale values.

For used-equipment listing purposes, a used HAAS DT-2 2022 can typically be expected to sell in the approximately $55,000 to $80,000 USD range, with the actual value depending heavily on condition, spindle hours, options, tooling, and location.

A low-hour machine with a healthy high-speed spindle, accurate X/Y/Z positioning, functioning 20+1 tool changer, probing, fourth-axis capability, chip auger, through-spindle coolant, complete CAT40 tooling, and documented maintenance may command a premium. A machine requiring spindle, ballscrew, servo, tool-changer, control, or electrical repairs may sell for considerably less.