DOOSAN PUMA TT1800SY – 2007
USED DOOSAN PUMA TT1800SY – 2007
The DOOSAN PUMA TT1800SY – 2007 is a twin-spindle, twin-turret CNC turning center designed for high-productivity machining of complex cylindrical components. The SY configuration combines Y-axis capability, live tooling, C-axis positioning, and a second spindle, allowing manufacturers to perform turning, milling, drilling, tapping, and second-side operations on a single machine. A documented 2007 machine uses a FANUC 18i-TB CNC control and an 8-axis configuration.
The machine provides approximately 9.1 inches of maximum turning diameter, an approximately 2.6-inch bar capacity, and an 8-inch chuck configuration. The upper turret has X1 and Z1 movement, while the lower turret uses X2 and Z2 movement. The Y-axis provides approximately 3.9 inches of total travel, with ±2 inches of movement around its center position.
Both the main and sub-spindle are capable of approximately 5,000 RPM, with documented configurations using 22/15 kW or approximately 30 HP spindle motors depending on the specific machine specification. The live-tool system reaches approximately 5,000 RPM and uses a 7.5 HP drive in the documented 2007 configuration.
The machine also features two 12-station turrets, C-axis capability, live tooling, parts catching, chip conveying, and tool presetting on documented examples. These features make the DOOSAN PUMA TT1800SY – 2007 suitable for production environments where reducing setups and completing multiple operations in one cycle are important.
DOOSAN PUMA TT1800SY – 2007 – AXIS
The DOOSAN PUMA TT1800SY – 2007 is a multi-axis CNC turning center with two independent turret systems, two spindles, Y-axis capability, and C-axis positioning. Depending on the specific documentation and configuration, listings describe the machine as 7- or 8-axis, so the exact axis count should be verified from the machine’s control and configuration.
| AXIS | SPECIFICATION |
|---|---|
| X1 Axis Travel | 6.5 inches / 165 mm |
| X2 Axis Travel | 7.5 inches / 190 mm |
| Z1 Axis Travel | 27.6 inches / 700 mm |
| Z2 Axis Travel | 28.3 inches / 720 mm |
| Y Axis Travel | 3.9 inches / 100 mm |
| Y-Axis Position | ±1.97 inches / ±50 mm |
| A/B Sub-Spindle Travel | Approximately 30.3 inches / 770 mm |
| C-Axis Resolution | 0.001° |
| Configuration | Twin spindle / twin turret |
The multiple-axis architecture allows the machine to perform turning and driven-tool operations while reducing the number of manual repositioning operations.
DOOSAN PUMA TT1800SY – 2007 – AXIS TRAVELS / WORK ENVELOPE
The TT1800SY provides approximately 9.1 inches of swing and maximum turning diameter, with documented maximum turning length around 9.1 inches for the standard specification. Some listings additionally describe approximately 27-28 inches of center or spindle-to-spindle working distance, depending on how the measurement is defined.
| WORK ENVELOPE | SPECIFICATION |
|---|---|
| Swing Over Bed | 9.1 inches / 230 mm |
| Swing Over Saddle | 9.1 inches / 230 mm |
| Maximum Turning Diameter | 9.1 inches / 230 mm |
| Recommended Turning Diameter | 8.3 inches / 210 mm |
| Maximum Turning Length | 9.1 inches / 230 mm |
| X1 Travel | 6.5 inches |
| X2 Travel | 7.5 inches |
| Z1 Travel | 27.6 inches |
| Z2 Travel | 28.3 inches |
| Y Travel | 3.9 inches |
The compact turning envelope is optimized for production components where multi-tasking capability is more important than extremely large turning diameter.
DOOSAN PUMA TT1800SY – 2007 – CAPACITY
The machine is designed around two 8-inch chucks and approximately 65-68 mm of spindle through capacity, depending on the documented spindle configuration. The manufacturer brochure identifies approximately 65 mm bar working diameter, while individual machine listings show up to 2.625 inches.
| CAPACITY | SPECIFICATION |
|---|---|
| Main Chuck | 8 inches |
| Sub-Spindle Chuck | 8 inches |
| Bar Capacity | Approximately 2.6 inches / 65-68 mm |
| Maximum Turning Diameter | 9.1 inches |
| Recommended Turning Diameter | 8.3 inches |
| Maximum Turning Length | Approximately 9.1 inches |
| Spindle Bore | Approximately 3 inches |
The dual-spindle design allows parts to be transferred between spindles for second-side machining without requiring the operator to remove and manually reposition the component.
DOOSAN PUMA TT1800SY – 2007 – MAIN SPINDLE
The main spindle is designed for production turning and C-axis milling operations. Documented 2007 specifications identify a maximum spindle speed of 5,000 RPM, an A2-6 spindle nose, and spindle power around 22/15 kW or approximately 30 HP depending on the configuration.
| MAIN SPINDLE | SPECIFICATION |
|---|---|
| Maximum Speed | 5,000 RPM |
| Spindle Motor | Approximately 22/15 kW to 30 HP |
| Spindle Nose | A2-6 |
| Spindle Bore | Approximately 3 inches |
| C-Axis Resolution | 0.001° |
| C-Axis Rapid | 600 RPM |
| Application | Turning and C-axis milling |
The high spindle speed combined with C-axis positioning allows the machine to perform both conventional turning and driven-tool operations.
DOOSAN PUMA TT1800SY – 2007 – SUB-SPINDLE
The second spindle is one of the defining features of the TT1800SY. It uses an 8-inch chuck and is capable of approximately 5,000 RPM, allowing the machine to transfer components for machining of the second side.
| SUB-SPINDLE | SPECIFICATION |
|---|---|
| Chuck Size | 8 inches |
| Maximum Speed | 5,000 RPM |
| Spindle Nose | A2-6 |
| Bar Capacity | Approximately 2.6 inches |
| Spindle Bore | Approximately 3 inches |
| C2-Axis | 0.001° indexing |
| Application | Second-side machining |
The sub-spindle can significantly reduce handling time on suitable parts and allows operations to be completed on both ends of the component within the same production cycle.
DOOSAN PUMA TT1800SY – 2007 – MILLING SPINDLE
The upper turret supports driven tooling, allowing the machine to perform milling, drilling, tapping, and other rotary-tool operations. Documented specifications identify a 5,000 RPM live-tool speed and approximately 7.5 HP live-tool motor.
| MILLING SPINDLE | SPECIFICATION |
|---|---|
| Live Tool Speed | 5,000 RPM |
| Live Tool Motor | Approximately 7.5 HP |
| Live Tool Torque | Approximately 34.7 ft-lbs |
| Tool Interface | BMT-55 |
| Application | Milling, drilling and tapping |
| Y-Axis | Upper turret |
The combination of live tooling and Y-axis movement allows off-center features to be machined without moving the part to another machine.
DOOSAN PUMA TT1800SY – 2007 – TOOL TURRETS
The TT1800SY uses two 12-station turrets, providing 24 indexed positions across the two turret systems. Some machine listings describe the tooling configuration as 24 + 24 indexing positions because of the turret’s tool-position architecture.
| TOOL TURRETS | SPECIFICATION |
|---|---|
| Upper Turret | 12 stations |
| Lower Turret | 12 stations |
| Total Turret Stations | 24 |
| Tool Interface | BMT-55 |
| OD Tool Size | Approximately 0.8 × 0.8 inches |
| Maximum ID Tool | Approximately 1.3 inches |
| Indexing Time | Approximately 0.15 second |
| Live Tool Speed | 5,000 RPM |
The twin-turret arrangement allows multiple tools to remain ready for machining and can support simultaneous or coordinated machining operations depending on the program.
DOOSAN PUMA TT1800SY – 2007 – CONTROL SYSTEM
A documented 2007 DOOSAN PUMA TT1800SY is equipped with a FANUC 18i-TB CNC control. The FANUC platform provides the programming environment for the machine’s multiple axes, spindles, turrets, C-axis functions, and live tooling.
| CONTROL SYSTEM | SPECIFICATION |
|---|---|
| CNC Control | FANUC 18i-TB |
| Machine Configuration | Multi-axis CNC |
| Main/Sub Spindle Control | Yes |
| C-Axis Control | Yes |
| Y-Axis Control | Yes |
| Live Tooling Control | Yes |
| Programming | CNC turning and milling |
For a used 2007 machine, buyers should inspect the control display, keypad, memory, drives, servo amplifiers, spindle drives, electrical cabinet, backup parameters, and communication interfaces.
DOOSAN PUMA TT1800SY – 2007 – RAPID TRAVERSE AND MOTION
The TT1800SY provides rapid axis movement appropriate for production machining. Documented specifications list approximately 787 IPM X-axis rapid, 295 IPM Y-axis rapid, and up to 1,575 IPM Z-axis rapid.
| MOTION | SPECIFICATION |
|---|---|
| X1 Rapid | Approximately 787 IPM |
| X2 Rapid | Approximately 787 IPM |
| Y Rapid | Approximately 295 IPM |
| Z1 Rapid | Approximately 1,575 IPM |
| Z2 Rapid | Approximately 1,575 IPM |
| C-Axis Rapid | Approximately 600 RPM |
| Y Travel | 3.9 inches |
High rapid rates reduce non-cutting movement and help improve cycle efficiency in repetitive production work.
DOOSAN PUMA TT1800SY – 2007 – COOLANT & CHIP MANAGEMENT
The TT1800SY is designed for production machining with coolant delivery and chip-handling equipment. Documented 2007 machines include a rear-discharge chip conveyor and coolant tank, while some equipped machines include high-pressure coolant systems.
| COOLANT & CHIP MANAGEMENT | SPECIFICATION |
|---|---|
| Coolant System | Included |
| Coolant Tank | Documented |
| Chip Conveyor | Documented |
| High-Pressure Coolant | Available on equipped machines |
| Chip Discharge | Rear discharge on documented machine |
| Parts Catcher | Documented |
| Application | Production chip management |
Effective chip removal is particularly important when the machine is used for continuous turning, live-tool drilling, and milling operations.
DOOSAN PUMA TT1800SY – 2007 – TOOL PRESETTER & PARTS CATCHER
Documented 2007 machines are equipped with a tool presetter and automatic parts-catching equipment. These features can reduce setup time and allow finished parts to be collected without stopping the machining cycle.
| AUTOMATION | SPECIFICATION |
|---|---|
| Tool Presetter | Equipped |
| Parts Catcher | Equipped |
| Parts Conveyor | Available/documented |
| Bar Feeder | Available on equipped machines |
| Tool Setter | Automatic/documented |
| Sub-Spindle Unloader | Available on equipped configurations |
Automation equipment can be especially valuable when the machine is used for unattended or lights-out production.
DOOSAN PUMA TT1800SY – 2007 – MACHINE CONSTRUCTION
The TT1800SY is constructed as a production-oriented multi-tasking turning center with two turrets and two spindles. Its BMT-55 tooling system and twin-spindle architecture provide the rigidity and flexibility needed for combined turning and driven-tool machining.
| CONSTRUCTION | SPECIFICATION |
|---|---|
| Machine Type | Twin-spindle CNC turning center |
| Turret Configuration | Twin turret |
| Tool Interface | BMT-55 |
| Spindle Configuration | Main + sub spindle |
| Y-Axis | Upper turret |
| C-Axis | Main and sub spindle |
| Machine Design | Production multi-tasking |
The machine’s compact turning envelope combined with multiple machining functions makes it suitable for high-volume components with several operations.
DOOSAN PUMA TT1800SY – 2007 – POWER REQUIREMENTS
The exact electrical requirement varies by machine configuration. A documented 2007 specification lists approximately 68.4 kVA total power requirement, while the machine’s spindle and live-tool motors represent a substantial portion of the installed electrical capacity.
| POWER | SPECIFICATION |
|---|---|
| Total Power Requirement | Approximately 68.4 kVA |
| Main Spindle | Approximately 22/15 kW or 30 HP |
| Sub-Spindle | Approximately 22/15 kW on documented configuration |
| Live Tool Motor | Approximately 5.5 kW / 7.5 HP |
| Electrical Service | Verify machine nameplate |
| Installation | Industrial 3-phase service |
The exact voltage, amperage, transformer requirements, and phase configuration should be confirmed from the individual machine’s electrical documentation.
DOOSAN PUMA TT1800SY – 2007 – DIMENSIONS & WEIGHT
Documented 2007 specifications place the machine at approximately 156 inches long × 85 inches wide × 82 inches high, with a weight of approximately 19,400 pounds. Other individual listings show approximately 154 × 82 × 82 inches and 17,200 pounds, demonstrating that accessories and configuration can affect the final shipping dimensions and weight.
| DIMENSIONS & WEIGHT | SPECIFICATION |
|---|---|
| Approximate Length | 154-156 inches |
| Approximate Width | 82-85 inches |
| Approximate Height | 82 inches |
| Documented Weight | Approximately 17,200-19,400 lbs |
| Machine Type | Twin-spindle/twin-turret CNC |
| Installation | Industrial floor installation |
Buyers should obtain the exact shipping dimensions from the seller before arranging rigging and transportation.
DOOSAN PUMA TT1800SY – 2007 – GENERAL INFORMATION
The DOOSAN PUMA TT1800SY – 2007 is a multi-tasking CNC turning center designed around twin spindles, twin turrets, Y-axis movement, live tooling, and C-axis capability. The documented 2007 configuration uses a FANUC 18i-TB control and 8-axis architecture.
| GENERAL INFORMATION | SPECIFICATION |
|---|---|
| Manufacturer | DOOSAN |
| Model | PUMA TT1800SY |
| Year | 2007 |
| Machine Type | Twin-spindle CNC turning center |
| Configuration | Twin turret |
| Control | FANUC 18i-TB |
| Maximum Turning Diameter | 9.1 inches |
| Recommended Turning Diameter | 8.3 inches |
| Bar Capacity | Approximately 2.6 inches |
| Main Spindle Speed | 5,000 RPM |
| Sub-Spindle Speed | 5,000 RPM |
| Main Chuck | 8 inches |
| Sub-Spindle Chuck | 8 inches |
| Live Tool Speed | 5,000 RPM |
| Turrets | 2 × 12 station |
| Y-Axis Travel | 3.9 inches |
| C-Axis Resolution | 0.001° |
A documented 2007 machine also includes chip conveyor, coolant system, tool presetter, parts catcher, live tooling, and Y-axis equipment.
INDUSTRIES THAT USE DOOSAN PUMA TT1800SY – 2007
The TT1800SY is particularly useful in industries where components require several turning, milling, drilling, and second-side operations.
| INDUSTRY | TYPICAL APPLICATION |
|---|---|
| Automotive | Shafts, fittings and drivetrain components |
| Aerospace | Precision turned and milled components |
| Medical | Complex precision components |
| Oil & Gas | Fittings and connectors |
| Hydraulics | Valve components and fittings |
| Industrial Equipment | Shafts and mechanical components |
| Robotics | Precision mechanical components |
| General Manufacturing | Production turned parts |
| Job Shops | Complex short- and medium-run work |
| Machinery Manufacturing | Multi-operation components |
The twin-spindle and twin-turret configuration can be especially valuable for production parts requiring machining on both ends.
TYPICAL PARTS DOOSAN PUMA TT1800SY – 2007 CAN PRODUCE
The machine can produce complex rotational components requiring turning combined with live-tool operations and second-side machining.
| PART TYPE | EXAMPLES |
|---|---|
| Shafts | Drive and transmission shafts |
| Fittings | Hydraulic and pneumatic fittings |
| Valve Components | Valve bodies and stems |
| Bushings | Precision bushings |
| Couplings | Mechanical couplings |
| Flanges | Small and medium flanges |
| Pins | Turned and cross-drilled pins |
| Connectors | Industrial connectors |
| Housings | Precision cylindrical housings |
| Multi-Side Components | Parts requiring second-side machining |
The Y-axis is particularly useful for off-center drilling, milling flats, keyways, and other features that cannot be completed with conventional turning alone.
WHY CHOOSE DOOSAN PUMA TT1800SY – 2007
The DOOSAN PUMA TT1800SY – 2007 combines several machining functions into one production platform. Its twin spindles, twin turrets, Y-axis, live tooling, and C-axis capability can substantially reduce the number of separate operations required for suitable components.
| FEATURE | BENEFIT |
|---|---|
| Twin Spindles | Enables second-side machining |
| Twin Turrets | Provides multiple simultaneous tooling options |
| Y-Axis | Enables off-center machining |
| Live Tooling | Supports milling and drilling |
| C-Axis | Enables indexed and contour milling |
| 8-Inch Chucks | Strong workholding capability |
| 2.6-Inch Bar Capacity | Suitable for substantial bar stock |
| 5,000 RPM Spindles | Supports production turning |
| FANUC 18i-TB | Established CNC platform |
| 24 Turret Stations | Supports complex programs |
| Parts Catcher | Supports automated production |
| Chip Conveyor | Improves chip handling |
These features make the machine suitable for manufacturers looking to consolidate turning and milling operations.
WHY BUY USED DOOSAN PUMA TT1800SY – 2007
Buying a used DOOSAN PUMA TT1800SY – 2007 can provide access to a sophisticated multi-tasking CNC turning center at a substantially lower acquisition cost than a new twin-spindle, twin-turret machine. The machine combines two spindles, two turrets, Y-axis movement, live tooling, and C-axis control in one platform.
The biggest advantage is the machine’s ability to reduce secondary operations. A suitable part can be turned on the main spindle, receive live-tool operations, transfer to the sub-spindle, and undergo second-side machining without being manually removed from the production system.
Used examples can also be equipped with valuable automation such as bar feeders, tool presetters, parts catchers, parts conveyors, and high-pressure coolant. A documented 2007 machine was configured with an IEMCA magazine bar feeder, parts catcher, tool setter, coolant, chip conveyor, and C-axis functionality.
Before purchasing a used TT1800SY, buyers should inspect both spindles, check spindle bearings and C-axis positioning, test both turrets, verify Y-axis movement, inspect live-tool holders, check the FANUC control, examine the electrical cabinet, verify the chip conveyor and coolant system, and confirm the condition of the bar feeder and parts catcher if included.
Spindle hours, cutting hours, maintenance records, tooling packages, automation equipment, and machine accuracy can have a significant impact on the actual market value.
HOW MUCH DOES A USED DOOSAN PUMA TT1800SY – 2007 COST?
Used DOOSAN PUMA TT1800SY machines show a wide range of asking prices depending on year, condition, hours, tooling, automation, and location. A current 2007 example in the United States is listed as price on request, while a 2007 machine in Spain is currently advertised at approximately $92,689-$93,221.
However, these higher asking prices appear to represent machines with substantial equipment or particular configurations, and historical/sold examples do not necessarily transact at the same level. Current used-market references also show a later 2018 TT1800SY advertised at $129,900 and another TT1800SY listing around $39,999, illustrating the importance of configuration and condition when valuing these machines.
| CONDITION | ESTIMATED USED PRICE |
|---|---|
| As-Is / High Hours | $30,000-$40,000 |
| Running / Average Condition | $40,000-$50,000 |
| Good Condition | $50,000-$60,000 |
| Excellent Condition | $60,000-$75,000 |
| Low-Hour / Well Equipped | $75,000-$90,000+ |
| Best Estimated Listing Value | $55,000-$70,000 |
A DOOSAN PUMA TT1800SY – 2007 in good running condition with FANUC 18i-TB, twin 8-inch chucks, twin 12-station turrets, Y-axis, live tooling, C-axis, chip conveyor, parts catcher, and a healthy main and sub-spindle could reasonably be positioned around $55,000-$70,000.
A machine with a bar feeder, extensive live-tool package, high-pressure coolant, tooling, and documented low hours can justify a higher asking price. Conversely, machines requiring spindle, turret, control, or axis repairs should be priced substantially lower.
The exact condition and included equipment should therefore be documented carefully when establishing the final asking price for a particular DOOSAN PUMA TT1800SY – 2007.
Related Products
-
DOOSAN - PUMA 2600M
VIEW MACHINE -
DOOSAN - LYNX 200LC
VIEW MACHINE -
DOOSAN - DNM 4500
VIEW MACHINE -
DOOSAN - BM 2740M
VIEW MACHINE