DOOSAN PUMA VT1100M – 2008
USED DOOSAN PUMA VT1100M – 2008
The DOOSAN PUMA VT1100M – 2008 is a heavy-duty CNC vertical turning center designed for machining large, heavy, and short workpieces. The VT1100M combines a rigid box-way construction, large vertical turning capacity, a high-torque spindle, and live tooling capability. It is designed for turning, facing, boring, drilling, tapping, and milling operations on large-diameter components. The documented 2008 machine uses a 40-inch chuck/table, 75 HP spindle motor, and FANUC 21i-TB CNC control.
The 2008 configuration provides approximately 50 inches of swing, 43.3 inches of maximum turning diameter, and 39.37 inches of maximum turning length. The X-axis travel is approximately 22.8 inches, while the Z-axis travel is approximately 39.37 inches. The machine’s 40-inch table/chuck and approximately 4,400–4,850 lb workholding capacity allow it to accommodate substantial industrial components.
The VT1100M is equipped with a heavy-duty 850 RPM spindle powered by approximately 75 HP. The documented 2008 machine also includes live tooling capable of 3,000 RPM with a 15 HP live-tool motor, allowing milling, drilling, and tapping operations in addition to conventional turning. A 12-station turret provides automatic tool indexing for production machining.
The DOOSAN PUMA VT1100M – 2008 is particularly suitable for oil and gas, energy, aerospace, heavy equipment, construction machinery, power generation, mining, and general industrial manufacturing. Large flanges, rings, housings, valves, gears, wheel components, and other heavy cylindrical parts can be machined with fewer setups because of the machine’s large vertical work envelope and live-tooling capability.
DOOSAN PUMA VT1100M 2008 – AXIS
| Specification | Value |
|---|---|
| X Axis | 22.8″ (580 mm) |
| Z Axis | 39.37″ (1,000 mm) |
| Number of Controlled Axes | 3 |
| C Axis | Yes – Configuration Equipped |
| Machine Configuration | CNC Vertical Turning Center |
| Axis Drive | CNC Servo Driven |
| Guideway Type | Box Way |
The VT1100M uses approximately 580 mm of X-axis travel and 1,000 mm of Z-axis travel, with the documented machine also equipped for C-axis indexing and live tooling.
DOOSAN PUMA VT1100M 2008 – AXIS TRAVELS / WORK ENVELOPE
| Specification | Value |
|---|---|
| X Travel | 22.8″ (580 mm) |
| Z Travel | 39.37″ (1,000 mm) |
| Maximum Swing | 50″ (1,270 mm) |
| Maximum Turning Diameter | 43.3″ (1,100 mm) |
| Maximum Turning Length | 39.37″ (1,000 mm) |
| Table Diameter | 40″ |
| Maximum Table Load | Approximately 4,400–4,850 lbs |
| X/Z Rapid Traverse | 787 IPM |
| Spindle-to-Bed Front | Approximately 29.52″ |
| Work Envelope | Heavy-Duty Vertical Turning |
The VT1100M’s 43.3-inch maximum turning diameter and 39.37-inch turning height provide substantial capacity for large-diameter components.
DOOSAN PUMA VT1100M 2008 – CAPACITY
| Specification | Value |
|---|---|
| Machine Type | CNC Vertical Turning Center |
| Standard Axes | 3 |
| C Axis | Yes |
| Table / Chuck Diameter | 40″ |
| Maximum Swing | 50″ |
| Maximum Turning Diameter | 43.3″ |
| Maximum Turning Length | 39.37″ |
| Maximum Table Load | Approximately 4,400–4,850 lbs |
| Live Tooling | Yes |
| Live Tooling Speed | 3,000 RPM |
| Live Tool Motor | 15 HP |
| Turret Capacity | 12 Stations |
| Box Ways | Yes |
| Gearbox | Yes |
DOOSAN PUMA VT1100M 2008 – SPINDLE
| Specification | Value |
|---|---|
| Spindle Type | Vertical |
| Maximum Spindle Speed | 850 RPM |
| Spindle Motor | 75 HP |
| Spindle Nose | A2-15 |
| Main Chuck | 40″ |
| Spindle Bearing Diameter | Approximately 7.87″ |
| Spindle Configuration | Heavy-Duty Gear Driven |
| Gearbox | Yes |
| C-Axis Indexing | 0.001° |
| Spindle Orientation | Equipped |
The documented 2008 machine uses an 850 RPM, 75 HP spindle with an A2-15 spindle nose, providing the high torque required for heavy-duty vertical turning.
DOOSAN PUMA VT1100M 2008 – MILLING SPINDLE
| Specification | Value |
|---|---|
| Live Tooling | Yes |
| Live Tool Speed | 3,000 RPM |
| Live Tool Motor | 15 HP |
| C Axis | Yes |
| Milling Capability | Yes |
| Drilling Capability | Yes |
| Tapping Capability | Yes |
| Tool Interface | BMT 85P |
| Tool Positions | 12 |
| Live Tooling Configuration | Rotating Tools |
The VT1100M’s live tooling allows the machine to perform face and side milling, drilling, and tapping without removing the workpiece from the vertical turning center.
DOOSAN PUMA VT1100M 2008 – TOOL CHANGER
| Specification | Value |
|---|---|
| Turret Type | Automatic Turret |
| Turret Capacity | 12 Stations |
| Tool Interface | BMT 85P |
| Live Tool Positions | Configuration Equipped |
| Tool Indexing | Automatic |
| Turret Index Time | Approximately 0.5 Seconds |
| Tool Management | CNC Controlled |
| Tool Presetter | Equipped |
The documented VT1100M uses a 12-position turret, with rotating-tool capability for live milling applications.
DOOSAN PUMA VT1100M 2008 – CONTROL SYSTEM
| Specification | Value |
|---|---|
| CNC Control | FANUC 21i-TB |
| Control Type | CNC Turning Control |
| Programming | G-Code |
| C-Axis Control | Equipped |
| Spindle Orientation | Equipped |
| Rigid Tapping | Equipped / Configuration Dependent |
| Tool Presetter | Equipped |
| Automatic Door | Equipped |
| Data Transfer | Configuration Dependent |
The documented 2008 VT1100M uses a FANUC 21i-TB CNC control with C-axis and live-tooling capability.
DOOSAN PUMA VT1100M 2008 – COOLANT / CHIP MANAGEMENT
| Specification | Value |
|---|---|
| Coolant System | Flood Coolant |
| Coolant Pump | 145 PSI |
| Chip Conveyor | Equipped |
| Chip Conveyor Type | Turbo |
| Shower Coolant | Equipped |
| Chuck Coolant Blast | Equipped / Configuration Dependent |
| High-Pressure Coolant | 145 PSI |
| Coolant Filtration | Configuration Dependent |
| Automatic Lubrication | Equipped |
The documented 2008 machine includes a turbo chip conveyor and 145 PSI coolant pump, together with shower coolant for chip flushing.
DOOSAN PUMA VT1100M 2008 – POWER REQUIREMENTS
| Specification | Value |
|---|---|
| Electrical Supply | Three Phase |
| Voltage | Configuration Dependent |
| Frequency | 60 Hz Configuration |
| Phase | 3 Phase |
| Main Spindle Motor | 75 HP |
| Live Tool Motor | 15 HP |
| Connected Load | Configuration Dependent |
| Air Supply | Required |
| Transformer | Configuration Dependent |
The exact voltage, amperage, transformer size, and air requirements should be verified from the individual machine’s electrical documentation and nameplate.
DOOSAN PUMA VT1100M 2008 – DIMENSIONS
| Specification | Value |
|---|---|
| Length | Approximately 110–112″ |
| Width | Approximately 130–131″ |
| Height | Approximately 158–159″ |
| Machine Weight | Approximately 48,500 lbs |
| Floor Space | Configuration Dependent |
| Rigging | Heavy Industrial Rigging Required |
The documented 2008 machines are approximately 110–112 inches long, 130–131 inches wide, and 158–159 inches high, with a machine weight of approximately 48,500 lbs.
DOOSAN PUMA VT1100M 2008 – GENERAL INFORMATION
| Specification | Value |
|---|---|
| Manufacturer | Doosan |
| Model | PUMA VT1100M |
| Year | 2008 |
| Machine Type | CNC Vertical Turning Center |
| CNC Control | FANUC 21i-TB |
| Number of Axes | 3 |
| C Axis | Yes |
| Table / Chuck | 40″ |
| Maximum Swing | 50″ |
| Maximum Turning Diameter | 43.3″ |
| Maximum Turning Length | 39.37″ |
| X Travel | 22.8″ |
| Z Travel | 39.37″ |
| Spindle Speed | 850 RPM |
| Spindle Motor | 75 HP |
| Live Tool Speed | 3,000 RPM |
| Live Tool Motor | 15 HP |
| Turret Capacity | 12 Stations |
| Spindle Nose | A2-15 |
| Tool Interface | BMT 85P |
| Chip Conveyor | Yes |
| Coolant Pressure | 145 PSI |
| Machine Weight | Approximately 48,500 lbs |
INDUSTRIES THAT USE DOOSAN PUMA VT1100M 2008
The DOOSAN PUMA VT1100M 2008 is designed for large and heavy machining applications across numerous industries.
- Oil & Gas
- Aerospace
- Power Generation
- Heavy Equipment
- Automotive
- Mining
- Construction Equipment
- Energy
- Marine
- Industrial Machinery
- Defense
- General Engineering
- Contract Manufacturing
- Large Component Manufacturing
TYPICAL PARTS DOOSAN PUMA VT1100M 2008 CAN PRODUCE
The large vertical work envelope and live tooling make the VT1100M suitable for machining heavy, large-diameter components.
- Large flanges
- Valve bodies
- Valve components
- Gear blanks
- Large rings
- Bearing housings
- Pump housings
- Motor housings
- Wheel components
- Oil & gas components
- Heavy equipment components
- Power-generation components
- Large shafts
- Industrial housings
- Precision circular components
Typical operations include OD turning, ID boring, facing, grooving, drilling, tapping, milling, side milling, and C-axis indexed machining.
WHY CHOOSE DOOSAN PUMA VT1100M 2008
The DOOSAN PUMA VT1100M 2008 is designed for applications where machine rigidity, spindle power, and large workholding capacity are essential. Its 50-inch swing, 43.3-inch maximum turning diameter, 39.37-inch turning length, and 40-inch chuck allow it to accommodate components considerably larger than those handled by conventional horizontal CNC lathes.
The 75 HP, 850 RPM spindle is designed for heavy-duty cutting, while the box-way construction provides rigidity for demanding machining operations. The addition of a 15 HP live-tooling system operating at up to 3,000 RPM expands the machine beyond basic turning and allows milling, drilling, and tapping operations.
The FANUC 21i-TB control, 12-station turret, C-axis, chip conveyor, automatic door, and high-pressure coolant system provide a production-oriented package for large components.
WHY BUY USED DOOSAN PUMA VT1100M 2008
A used DOOSAN PUMA VT1100M 2008 can provide large-capacity vertical turning and live milling capability at a substantially lower acquisition cost than a comparable new heavy-duty vertical turning center.
The machine is particularly valuable for shops that regularly machine large, heavy components and need a combination of large chuck capacity, high spindle horsepower, C-axis indexing, and live tooling.
Before purchasing a used VT1100M, buyers should inspect:
- Main spindle condition
- Spindle bearings
- Spindle runout
- Table/chuck condition
- C-axis operation
- X/Z axis backlash
- Ballscrews
- Box ways
- Turret indexing
- Live tooling operation
- FANUC control
- Servo drives
- Gearbox
- Chip conveyor
- Coolant pump
- Automatic door
- Tool presetter
- Machine geometry
- Lubrication system
- Electrical cabinet
- Maintenance history
- Spindle and cutting hours
Because this is a machine weighing approximately 48,500 lbs, buyers should also verify transportation, rigging, floor loading, electrical supply, and installation requirements before purchase.
HOW MUCH DOES A USED DOOSAN PUMA VT1100M 2008 COST?
The used market for the DOOSAN PUMA VT1100M 2008 is relatively limited, with current listings generally requiring buyers to request pricing rather than displaying a public asking price. A current US listing for a 2008 machine includes the FANUC 21i-TB control, live tooling with C-axis, 40-inch table/chuck, tool presetter, and chip conveyor.
Because of its large size, 75 HP spindle, 40-inch chuck, and live-tooling capability, the VT1100M generally occupies a higher price segment than smaller vertical turning centers. A reasonable estimated used-market range for a DOOSAN PUMA VT1100M 2008 is approximately $75,000–$125,000 USD, depending heavily on condition, hours, tooling, chuck, live tooling, control condition, and maintenance history.
| Machine Condition / Configuration | Estimated Used Price |
|---|---|
| As-Is / Higher Hours | $60,000–$75,000 |
| Running / Basic Configuration | $75,000–$90,000 |
| Good Condition / Well Equipped | $90,000–$110,000 |
| Low Hours / Live Tooling / C-Axis / Tooling | $110,000–$125,000+ |
Related Products
-
DOOSAN - DHC 400
VIEW MACHINE -
DOOSAN - DVF 5000
VIEW MACHINE -
DOOSAN - PUMA TT1500SY
VIEW MACHINE -
DOOSAN - S670L
VIEW MACHINE