USED OKUMA CADET LNC-8C

The OKUMA CADET LNC-8C is a compact, rigid CNC Turning Center designed for precision turning, facing, boring, threading, grooving, drilling, and general production machining. Built with a slant-bed, box-way machine structure, the CADET LNC-8C is well suited for manufacturers and job shops that need a dependable CNC lathe for small- to medium-sized components. The machine is particularly attractive for shops looking for a relatively compact turning center with a 12-station turret, hydraulic chuck, tailstock, and proven Okuma CNC control.

The OKUMA CADET LNC-8C provides approximately 400 mm (15.75″) of swing over the bed, a maximum turning diameter of approximately 250 mm (9.84″), and a machining length of approximately 500 mm (19.7–20″) depending on the individual machine configuration. Typical specifications include approximately 2″ to 3″ bar capacity, an 8″ to 10″ chuck, an A2-6 or A2-8 spindle configuration depending on version, and spindle speeds ranging from approximately 3,500 to 4,200 RPM.

The machine is commonly configured with an OSP-5020L, OSP-700L, or OSP-100L CNC control, a 12-station automatic turret, hydraulic tailstock, automatic lubrication, coolant system, and chip conveyor. Some machines are also equipped with bar feeders, hydraulic 3-jaw chucks, tool presetter systems, and IGF Interactive Graphic Function. Because the CADET LNC-8C was produced in different configurations over its production life, exact control, chuck, spindle, bar capacity, and turning-length specifications should be verified on the individual machine.

The OKUMA CADET LNC-8C is an excellent choice for manufacturers producing shafts, bushings, fittings, hydraulic components, valve components, pump parts, automotive components, sleeves, pins, and other precision turned parts requiring reliable CNC production capability.

---

OKUMA CADET LNC-8C – AXIS

The commonly published LNC-8C configuration provides approximately 175 mm (6.89″) of X-axis travel and 520 mm (20.47″) of Z-axis travel.

Specification	Value
X Axis	Approximately 175 mm (6.89″)
Z Axis	Approximately 520 mm (20.47″)
Y Axis	Not Standard
C Axis	Not Standard
Machine Configuration	CNC Horizontal Turning Center
Axis Configuration	X / Z
Guideway Configuration	Rigid Box Way

---

OKUMA CADET LNC-8C – AXIS TRAVELS / WORK ENVELOPE

The published specifications for the CADET LNC-8C list approximately 15.75″ swing over the bed, 9.84″ maximum turning diameter, and approximately 19.69–20″ turning length, with some configurations offering shorter machining lengths.

Specification	Value
Swing Over Bed	400 mm (15.75″)
Maximum Turning Diameter	250 mm (9.84″)
Maximum Turning Length	Approximately 500 mm (19.7–20″)
X Axis Travel	175 mm (6.89″)
Z Axis Travel	520 mm (20.47″)
Distance Between Centers	Approximately 569 mm (22.4″)
Main Bar Capacity	Approximately 2–3″
Chuck Size	Approximately 8–10″
Tailstock	Yes

---

OKUMA CADET LNC-8C – CAPACITY

Specification	Value
Machine Type	CNC Horizontal Turning Center
Main Chuck	8–10″, Configuration Dependent
Maximum Turning Diameter	9.84″
Maximum Turning Length	Approximately 20″
Main Bar Capacity	2–3″, Configuration Dependent
Main Spindle	Yes
Y Axis	No
C Axis	No
Live Tooling	No
Tailstock	Yes
Automatic Turret	Yes
Turret Capacity	12 Stations

---

OKUMA CADET LNC-8C – SPINDLE

Published configurations show spindle speeds of approximately 3,500–4,200 RPM, with spindle motor ratings ranging from approximately 10 HP to 15 HP, depending on the particular LNC-8C version. Spindle nose and bore also vary between configurations, with A2-6/A2-8 and approximately 2.2–3.15″ bore configurations appearing in used-machine specifications.

Specification	Value
Main Spindle Speed	Approximately 3,500–4,200 RPM
Spindle Motor	Approximately 10–15 HP
Spindle Nose	A2-6 / A2-8, Configuration Dependent
Spindle Bore	Approximately 2.2–3.15″
Spindle Configuration	Main Spindle
Spindle Orientation	Configuration Dependent
Spindle Cooling	Configuration Dependent
C-Axis	Not Standard

---

OKUMA CADET LNC-8C – TURRET / TOOLING

The CADET LNC-8C is commonly equipped with a 12-station automatic turret, with published turret indexing time of approximately 0.9 second.

Specification	Value
Turret Type	Automatic NC Turret
Tool Capacity	12 Stations
Tool Stations	12
Tool Index Time	Approximately 0.9 Second
Live Tooling	No
Static Tooling	Yes
Toolholder Type	Configuration Dependent
Tool Management	Automatic
Tool Presetter	Configuration Dependent

---

OKUMA CADET LNC-8C – CONTROL SYSTEM

The CADET LNC-8C has appeared with several Okuma control generations, including OSP-5020L, OSP-700L, and OSP-100L, depending on production year and machine configuration.

Specification	Value
CNC Control	Okuma OSP Series
Common Control	OSP-5020L / OSP-700L
Other Configuration	OSP-100L
Programming	ISO G-Code / Okuma Programming
Conversational Programming	Configuration Dependent
IGF	Configuration Dependent
Tool Offset Management	Yes
Work Coordinate Management	Yes
Fixed Cycles	Yes
Threading Cycles	Yes
Diagnostic Functions	Yes
Data Transfer	Configuration Dependent

---

OKUMA CADET LNC-8C – FEEDRATES

Commonly published LNC-8C specifications list approximately 472 IPM X-axis rapid traverse and 591 IPM Z-axis rapid traverse.

Specification	Value
X Rapid Traverse	Approximately 472 IPM
Z Rapid Traverse	Approximately 591 IPM
X Rapid Traverse	Approximately 12 m/min
Z Rapid Traverse	Approximately 15 m/min
Cutting Feedrate	Configuration Dependent
Maximum Feedrate	Configuration Dependent
Interpolation	Linear / Circular
Threading	CNC Controlled

---

OKUMA CADET LNC-8C – COOLANT / CHIP MANAGEMENT

Specification	Value
Flood Coolant	Standard
Coolant System	Yes
Chip Conveyor	Configuration Dependent
Chip Bucket	Configuration Dependent
Coolant Tank	Included
Coolant Pump	Included
Automatic Lubrication	Yes
Coolant Filtration	Configuration Dependent
Chip Management	Conveyor / Manual

Many used LNC-8C machines are equipped with coolant systems and chip conveyors, while the exact chip-management configuration depends on the machine.

---

OKUMA CADET LNC-8C – POWER REQUIREMENTS

Common used-machine specifications for the LNC-8C show 220 VAC, three-phase, 60 Hz electrical service. Exact electrical requirements should be checked against the machine’s individual electrical cabinet and nameplate.

Specification	Value
Electrical Supply	Three Phase
Voltage	220 VAC, Configuration Dependent
Frequency	60 Hz, Configuration Dependent
Phase	3 Phase
Connected Load	Configuration Dependent
Air Supply	Required
Hydraulic System	Yes / Configuration Dependent
Transformer	Configuration Dependent

---

OKUMA CADET LNC-8C – DIMENSIONS

Published specifications commonly place the CADET LNC-8C at approximately 108–110″ long, 66–76″ wide, and 64–80″ high, depending on machine configuration and accessories. Machines with chip conveyors or bar feeders require additional floor space.

Specification	Value
Length	Approximately 108–110″
Width	Approximately 66–76″
Height	Approximately 64–80″
Machine Weight	Approximately 9,500–9,900 lbs
Floor Space	Configuration Dependent
Chip Conveyor Footprint	Additional Space Required
Bar Feeder Footprint	Additional Space Required

---

OKUMA CADET LNC-8C – GENERAL INFORMATION

Item	Details
Manufacturer	Okuma
Model	CADET LNC-8C
Machine Type	CNC Horizontal Turning Center
CNC Control	OSP Series
X-Axis Travel	6.89″
Z-Axis Travel	20.47″
Swing Over Bed	15.75″
Maximum Turning Diameter	9.84″
Maximum Turning Length	Approximately 20″
Distance Between Centers	Approximately 22.4″
Main Chuck	8–10″
Main Bar Capacity	2–3″
Spindle Speed	3,500–4,200 RPM
Spindle Motor	10–15 HP
Spindle Nose	A2-6 / A2-8
Turret	12 Stations
Tailstock	Yes
Chip Conveyor	Configuration Dependent
Bar Feeder	Configuration Dependent
IGF	Configuration Dependent

---

INDUSTRIES THAT USE OKUMA CADET LNC-8C

The OKUMA CADET LNC-8C is well suited for industries that require reliable CNC turning of small- to medium-sized components, including:

• Automotive
• Aerospace
• Hydraulic and pneumatic
• Oil & gas
• Industrial machinery
• Energy
• Defense
• Pump and valve manufacturing
• General precision manufacturing
• Job shops
• Contract manufacturing

Its relatively compact footprint, 12-station turret, substantial spindle bore, and tailstock make it particularly useful for repetitive production of shafts, bushings, fittings, sleeves, and other cylindrical components.

---

TYPICAL PARTS OKUMA CADET LNC-8C CAN PRODUCE

The OKUMA CADET LNC-8C can manufacture:

• Shafts
• Bushings
• Pins
• Sleeves
• Couplings
• Hydraulic components
• Valve components
• Pump components
• Automotive components
• Fittings
• Bearing components
• Spacers
• Threaded components
• Precision turned parts

The machine can perform turning, facing, boring, threading, grooving, drilling, chamfering, taper turning, and other conventional CNC turning operations.

---

WHY CHOOSE OKUMA CADET LNC-8C

The OKUMA CADET LNC-8C is an excellent choice for manufacturers looking for a straightforward, rigid CNC turning center with a relatively compact footprint. Its 15.75″ swing, approximately 9.84″ maximum turning diameter, 12-station turret, and substantial spindle bore provide useful capability for a broad range of production components.

The rigid slant-bed box-way construction gives the machine good support during roughing and finishing operations. The automatic turret allows multiple turning, boring, threading, and grooving tools to remain loaded for production cycles, reducing manual intervention.

The machine’s tailstock also makes it suitable for longer shaft-like components that require additional workpiece support. Depending on configuration, a chip conveyor, bar feeder, tool presetter, hydraulic chuck, and IGF programming system can make the machine even more productive.

---

WHY BUY USED OKUMA CADET LNC-8C

Purchasing a used OKUMA CADET LNC-8C allows manufacturers to acquire a Japanese-built CNC turning center while keeping the investment significantly below the cost of newer CNC equipment.

Many used machines may include valuable options such as:

• Okuma OSP CNC control
• OSP-5020L control
• OSP-700L control
• OSP-100L control
• 12-station automatic turret
• 8″ or 10″ hydraulic chuck
• Tailstock
• Chip conveyor
• Bar feeder
• Hydraulic chuck
• Tool presetter
• IGF Interactive Graphic Function
• Automatic lubrication
• Coolant system
• Complete turning-tool package
• Toolholders

A currently listed OKUMA CADET LNC-8C is equipped with an OSP-700L control, chip conveyor, bar feed, tailstock, 12-station turret, and 2″ bar capacity, illustrating the type of production package available with used examples.

Before purchasing, buyers should inspect the main spindle, spindle bearings, chuck, drawtube, turret indexing, X/Z-axis movement, ballscrews, box ways, tailstock alignment, hydraulic system, coolant system, CNC control, electrical cabinet, and overall machine geometry.

For an older CADET LNC-8C, spindle hours, alarm history, maintenance records, control condition, replacement-part availability, and evidence of previous crashes should also be reviewed.

---

HOW MUCH DOES A USED OKUMA CADET LNC-8C COST?

The value of a used OKUMA CADET LNC-8C depends heavily on the machine’s age, spindle hours, CNC control, spindle condition, chuck configuration, turret condition, bar capacity, tailstock, chip conveyor, bar feeder, tooling package, and maintenance history.

Machines equipped with an OSP-700L or later control, hydraulic chuck, 12-station turret, tailstock, chip conveyor, bar feeder, tool presetter, and complete tooling generally command higher resale values.

A current used listing for an OKUMA CADET LNC-8C is offered at $6,950 USD, equipped with OSP-700L control, chip conveyor, bar feed, tailstock, and a 2″ bar capacity. For used-equipment listing purposes, a used OKUMA CADET LNC-8C can typically be expected to sell in the approximately $6,000 to $15,000 USD range, with the actual value depending heavily on condition, spindle hours, control generation, options, tooling, and location.

A well-maintained machine with a healthy spindle, accurate turret indexing, reliable Okuma control, hydraulic chuck, functioning tailstock, chip conveyor, bar feeder, and documented maintenance may command a premium. A machine requiring spindle repairs, ballscrew work, turret repairs, hydraulic work, or control/electrical repairs may sell for considerably less.