USED HAAS TM-2P – 2019
The HAAS TM-2P 2019 is a CNC Toolroom Mill designed to provide full CNC machining capability with a large work envelope, 40-taper tooling, automatic tool changing, and a user-friendly Haas CNC control. The TM-2P is designed for manufacturers, job shops, educational facilities, maintenance departments, and production environments that need a practical CNC milling machine with substantial X- and Y-axis travel without the size and cost of a larger production vertical machining center.
The 2019 HAAS TM-2P provides approximately 40″ (1,016 mm) of X-axis travel, 16″ (406 mm) of Y-axis travel, and 16″ (406 mm) of Z-axis travel. Its approximately 57.75″ × 10.5″ (1,466 × 267 mm) table provides a long working surface suitable for fixtures, vises, plates, long components, and multiple smaller workpieces. The machine uses a CAT40 or BT40 spindle, 6,000 RPM spindle speed, 7.5 HP spindle motor, and 10-pocket automatic tool changer.
The machine’s direct-speed belt-drive spindle provides approximately 33 ft-lb (45 Nm) of torque at 1,200 RPM, while X, Y, and Z rapid traverse rates are approximately 400 IPM (10.2 m/min). The TM-2P also supports conversational CNC programming, G-code programming, rigid tapping, Ethernet, USB/data-transfer capabilities, and Haas control functions depending on the installed configuration.
The HAAS TM-2P 2019 is an excellent choice for manufacturers producing fixtures, brackets, plates, molds, dies, tooling components, aerospace parts, automotive parts, maintenance components, and other precision-machined workpieces requiring a long X-axis travel and straightforward CNC operation.
HAAS TM-2P 2019 – AXIS
| Specification | Value |
|---|---|
| X Axis | 1,016 mm (40″) |
| Y Axis | 406 mm (16″) |
| Z Axis | 406 mm (16″) |
| Machine Configuration | CNC Toolroom Mill |
| Axis Configuration | 3-Axis |
| B Axis | Not Standard |
| C Axis | Not Standard |
| Fourth Axis | Configuration Dependent |
| Guideway Configuration | CNC Controlled |
HAAS TM-2P 2019 – AXIS TRAVELS / WORK ENVELOPE
| Specification | Value |
|---|---|
| X Axis Travel | 1,016 mm (40″) |
| Y Axis Travel | 406 mm (16″) |
| Z Axis Travel | 406 mm (16″) |
| Spindle Nose to Table – Maximum | Approximately 508 mm (20″) |
| Spindle Nose to Table – Minimum | Approximately 102 mm (4″) |
| Table Length | 1,466 mm (57.75″) |
| Table Width | 267 mm (10.5″) |
| T-Slot Width | 16 mm (5/8″) |
| T-Slot Center Distance | Approximately 102 mm (4″) |
| Number of Standard T-Slots | 3 |
| Maximum Table Load | Approximately 454 kg (1,000 lbs) |
HAAS TM-2P 2019 – CAPACITY
| Specification | Value |
|---|---|
| Machine Type | CNC Toolroom Mill |
| Table Size | 57.75″ × 10.5″ |
| Maximum Table Load | 1,000 lbs |
| X-Axis Travel | 40″ |
| Y-Axis Travel | 16″ |
| Z-Axis Travel | 16″ |
| Spindle Taper | CAT40 / BT40 |
| Spindle Speed | 6,000 RPM |
| Spindle Motor | 7.5 HP |
| Tool Capacity | 10 Tools |
| Number of Axes | 3 |
| Fourth Axis | Configuration Dependent |
| Rigid Tapping | Yes |
| Conversational Programming | Yes |
HAAS TM-2P 2019 – SPINDLE
| Specification | Value |
|---|---|
| Main Spindle Speed | 6,000 RPM |
| Spindle Motor | 7.5 HP / 5.6 kW |
| Spindle Taper | CAT40 / BT40 |
| Maximum Torque | 33 ft-lb / 45 Nm at 1,200 RPM |
| Drive System | Direct-Speed Belt Drive |
| Bearing Lubrication | Grease Packed |
| Spindle Cooling | Air Cooled |
| Spindle Orientation | Yes |
| Rigid Tapping | Yes |
The 6,000 RPM, 7.5 HP spindle provides a useful balance of cutting power and speed for general-purpose milling, drilling, tapping, and finishing.
HAAS TM-2P 2019 – TOOL CHANGER
| Specification | Value |
|---|---|
| Tool Capacity | 10 Tools |
| Tool Changer | Automatic Carousel |
| Tool Interface | CAT40 / BT40 |
| Maximum Tool Diameter | Approximately 89 mm (3.5″) |
| Maximum Tool Weight | Approximately 5.4 kg (12 lbs) |
| Tool-to-Tool Time | Approximately 5.7 sec |
| Chip-to-Chip Time | Approximately 6.5 sec |
| Tool Management | Automatic |
The 10-pocket automatic tool changer allows the operator to keep multiple cutting tools loaded and supports unattended tool changes during CNC programs.
HAAS TM-2P 2019 – CONTROL SYSTEM
| Specification | Value |
|---|---|
| CNC Control | Haas CNC Control |
| Programming | ISO G-Code |
| Conversational Programming | Yes |
| Tool Offset Management | Yes |
| Work Offset Management | Yes |
| Rigid Tapping | Yes |
| Ethernet | Configuration / Equipped |
| USB | Configuration Dependent |
| Advanced Tool Management | Configuration Dependent |
| HaasConnect | Configuration Dependent |
| HaasDrop | Configuration Dependent |
| Visual Part Programming | Configuration Dependent |
| User-Definable Macros | Configuration Dependent |
The Haas control provides both conversational and conventional programming capability, making the TM-2P suitable for experienced CNC programmers as well as shops transitioning from manual machining to CNC.
HAAS TM-2P 2019 – FEEDRATES
| Specification | Value |
|---|---|
| X Rapid Traverse | 400 IPM / 10.2 m/min |
| Y Rapid Traverse | 400 IPM / 10.2 m/min |
| Z Rapid Traverse | 400 IPM / 10.2 m/min |
| Maximum Cutting Feed | 400 IPM / 10.2 m/min |
| Maximum X Thrust | Approximately 2,000 lbf |
| Maximum Y Thrust | Approximately 2,000 lbf |
| Maximum Z Thrust | Approximately 2,000 lbf |
| Feedrate Override | Yes |
| Rapid Override | Yes |
Fast X, Y, and Z rapid movements help reduce positioning time and improve cycle efficiency during repetitive machining programs.
HAAS TM-2P 2019 – COOLANT / CHIP MANAGEMENT
| Specification | Value |
|---|---|
| Flood Coolant | Configuration Dependent |
| Coolant Pump | Yes |
| Coolant Tank | Configuration Dependent |
| Chip Management | Washdown / Manual |
| Through-Spindle Coolant | Configuration Dependent |
| High-Pressure Coolant | Configuration Dependent |
| Air Blast | Configuration Dependent |
| Automatic Lubrication | Yes |
The coolant and lubrication systems help maintain cutting performance and support reliable machine operation during extended production cycles.
HAAS TM-2P 2019 – POWER REQUIREMENTS
| Specification | Value |
|---|---|
| Electrical Supply | Single or Three Phase |
| Standard Single-Phase Voltage | 220 VAC |
| Single-Phase Full Load Current | Approximately 40 A |
| Three-Phase Low Voltage | 220 VAC |
| Three-Phase Low-Voltage Current | Approximately 25 A |
| Three-Phase High Voltage | 440 VAC |
| Three-Phase High-Voltage Current | Approximately 13 A |
| Air Requirement | 4 SCFM at 100 PSI |
| Minimum Air Pressure | Approximately 80 PSI |
| Connected Load | Configuration Dependent |
HAAS TM-2P 2019 – DIMENSIONS
| Specification | Value |
|---|---|
| Shipping Length | Approximately 127″ |
| Shipping Width | Approximately 78″ |
| Shipping Height | Approximately 100″ |
| Machine Weight | Approximately 5,060 lbs |
| Approximate Metric Weight | 2,295 kg |
| Floor Space | Configuration Dependent |
HAAS TM-2P 2019 – GENERAL INFORMATION
| Item | Details |
|---|---|
| Manufacturer | Haas Automation |
| Model | TM-2P |
| Year | 2019 |
| Machine Type | CNC Toolroom Mill |
| CNC Control | Haas CNC Control |
| X-Axis Travel | 40″ |
| Y-Axis Travel | 16″ |
| Z-Axis Travel | 16″ |
| Table Size | 57.75″ × 10.5″ |
| Maximum Table Load | 1,000 lbs |
| Spindle Taper | CAT40 / BT40 |
| Spindle Speed | 6,000 RPM |
| Spindle Motor | 7.5 HP |
| Maximum Torque | 33 ft-lb |
| Tool Capacity | 10 Tools |
| Rapid Traverse | 400 IPM |
| Rigid Tapping | Yes |
| Conversational Programming | Yes |
| Fourth Axis | Configuration Dependent |
INDUSTRIES THAT USE HAAS TM-2P 2019
The HAAS TM-2P 2019 is well suited for industries and applications requiring flexible CNC milling capability, including:
- Aerospace
- Automotive
- Defense
- Industrial machinery
- Tool and die
- General manufacturing
- Maintenance and repair
- Prototype manufacturing
- Education and training
- Job shops
- Contract manufacturing
Its 40″ X-axis travel and long worktable make it particularly useful for long parts, fixtures, plates, tooling components, and multiple-part production setups.
TYPICAL PARTS HAAS TM-2P 2019 CAN PRODUCE
The HAAS TM-2P 2019 can manufacture:
- Precision brackets
- Fixtures
- Jigs
- Mounting plates
- Tooling components
- Mold components
- Automotive components
- Aerospace components
- Hydraulic components
- Machine components
- Prototype parts
- Maintenance parts
- Custom production components
The machine can perform face milling, pocket milling, drilling, tapping, boring, reaming, slotting, contouring, profiling, chamfering, and other general CNC milling operations.
WHY CHOOSE HAAS TM-2P 2019
The HAAS TM-2P 2019 is an excellent choice for manufacturers looking for a practical CNC milling machine with substantial X-axis travel and easy-to-use CNC controls. Its 40″ × 16″ × 16″ work envelope provides considerably more travel than many compact toolroom mills.
The 6,000 RPM CAT40/BT40 spindle, 7.5 HP motor, and 10-tool automatic changer provide sufficient capability for general machining of aluminum, steel, stainless steel, plastics, and other engineering materials.
The toolroom-mill configuration also makes the machine attractive to shops that frequently change between different components. Conversational programming can simplify setup for less complex jobs, while standard G-code programming provides flexibility for more advanced production work.
WHY BUY USED HAAS TM-2P 2019
Purchasing a used HAAS TM-2P 2019 allows manufacturers to acquire a relatively modern CNC Toolroom Mill while reducing the capital investment compared with purchasing a new machine.
Many used machines may include valuable options such as:
- Haas CNC control
- 40″ X-axis travel
- 16″ Y-axis travel
- 16″ Z-axis travel
- CAT40 tooling
- 6,000 RPM spindle
- 7.5 HP spindle motor
- 10-pocket automatic tool changer
- Rigid tapping
- Ethernet
- USB/data transfer
- Advanced tool management
- HaasConnect
- HaasDrop
- Visual part programming
- Fourth-axis preparation
- Coolant system
- Automatic lubrication
- Complete CAT40 tooling
Before purchasing, buyers should inspect the spindle, spindle bearings, CAT40 taper, drawbar, X/Y/Z-axis movement, ballscrews, guideways, automatic tool changer, CNC control, coolant system, lubrication system, electrical cabinet, and machine geometry.
Spindle hours, alarm history, maintenance records, tooling, previous crash history, and the condition of the table and T-slots should also be reviewed.
HOW MUCH DOES A USED HAAS TM-2P 2019 COST?
The value of a used HAAS TM-2P 2019 depends on spindle hours, machine condition, CNC control, tool changer, spindle condition, installed options, tooling package, and maintenance history.
Machines equipped with low spindle hours, 10-tool ATC, rigid tapping, advanced Haas control functions, fourth-axis equipment, coolant equipment, extensive CAT40 tooling, and documented maintenance generally command higher resale values.
For used-equipment listing purposes, a used HAAS TM-2P 2019 can typically be expected to sell in the approximately $30,000 to $50,000 USD range, with the actual value depending heavily on condition, hours, options, tooling, and location.
A low-hour machine with a healthy spindle, accurate X/Y/Z positioning, reliable automatic tool changer, clean Haas control, complete CAT40 tooling, and documented service history may command a premium. A machine requiring spindle, ballscrew, servo, control, or electrical repairs may sell for considerably less.
Related Products
-
HAAS - ST20T
VIEW MACHINE -
HAAS - ST10Y
VIEW MACHINE -
HAAS - VF12/50
VIEW MACHINE -
HAAS - ST10L
VIEW MACHINE