USED DOOSAN LYNX 220A – 2010

The DOOSAN LYNX 220A – 2010 is a compact 2-axis CNC turning center designed for high-speed, accurate machining of small and medium-sized components. The machine combines a rigid slant-bed design with a high-speed spindle, hydraulic chucking, 12-station turret, and tailstock, making it well suited for both production machining and general job-shop applications. A 2010 example is documented with a 6-inch chuck, 20 HP spindle power, 6,000 RPM maximum spindle speed, and FANUC CNC control.

The LYNX 220A provides approximately 20.1 inches of swing, a maximum turning diameter of about 12.6 inches, and a maximum turning length of approximately 12.7 inches. Its standard configuration supports bar work up to approximately 1.8 inches, while the X-axis travel is about 6.9 inches and the Z-axis travel is approximately 13 inches. These capabilities make the machine particularly suitable for short-to-medium length turned components.

The main spindle reaches up to 6,000 RPM and is powered by approximately 20 HP, providing the speed needed for efficient turning and finishing operations. The LYNX 220A uses a 12-position turret, with standard 25 × 25 mm external tool capacity and up to 40 mm boring bar capacity. A tailstock with an MT4 quill taper is also available for supporting longer workpieces.

The DOOSAN LYNX 220A is commonly used for producing shafts, bushings, pins, collars, flanges, fittings, and other precision-turned components. Its compact footprint, high spindle speed, straightforward 2-axis configuration, and proven FANUC-based control make a used 2010 LYNX 220A an attractive option for manufacturers looking for productive CNC turning capacity without the cost of a newer machine.

---

DOOSAN LYNX 220A 2010 – AXIS

Specification	Details
Number of Axes	2
X-Axis	X
Z-Axis	Z
X-Axis Travel	175 mm / 6.9 in
Z-Axis Travel	330 mm / 13.0 in
Rapid Traverse X	30 m/min
Rapid Traverse Z	36 m/min

The LYNX 220A is configured as a conventional 2-axis CNC turning center, with X-axis movement controlling cutting diameter and Z-axis movement controlling longitudinal positioning.

---

DOOSAN LYNX 220A 2010 – AXIS TRAVELS / WORK ENVELOPE

Specification	Details
Swing Over Bed	510 mm / 20.1 in
Maximum Turning Diameter	320 mm / 12.6 in
Maximum Turning Length	322 mm / 12.7 in
X-Axis Travel	175 mm / 6.9 in
Z-Axis Travel	330 mm / 13.0 in
Recommended Turning Diameter	Approximately 170 mm
Machine Type	Slant-Bed CNC Lathe

The compact work envelope is designed around small and medium-sized turned components, providing sufficient clearance for a wide variety of production and job-shop applications.

---

DOOSAN LYNX 220A 2010 – CAPACITY

Specification	Details
Chuck Size	6 in
Maximum Turning Diameter	320 mm / 12.6 in
Maximum Turning Length	322 mm / 12.7 in
Bar Capacity	45 mm / 1.8 in
Swing	510 mm / 20.1 in
Tailstock	Yes
Tailstock Quill Diameter	65 mm / 2.6 in
Tailstock Quill Travel	80 mm / 3.1 in
Tailstock Taper	MT4

The LYNX 220A’s 6-inch chuck and approximately 1.8-inch bar capacity make it well suited to small-diameter production work and general CNC turning applications.

---

DOOSAN LYNX 220A 2010 – SPINDLE

Specification	Details
Maximum Spindle Speed	6,000 RPM
Spindle Motor Power	15 kW / approximately 20 HP
Continuous Spindle Power	11 kW
Spindle Bore / Through Hole	53 mm / 2.1 in
Spindle Nose	A2-5
Front Spindle Bearing Diameter	90 mm / 3.5 in
Chuck	6 in

The high-speed 6,000 RPM spindle allows the LYNX 220A to perform efficient roughing, finishing, drilling, and other turning operations while maintaining the compact machine’s production-oriented design.

---

DOOSAN LYNX 220A 2010 – MILLING SPINDLE

Specification	Details
Milling Spindle	Not Equipped
Rotary Tooling	Not Standard
Machine Configuration	2-Axis Turning
Main Spindle	Turning Operations

The standard LYNX 220A is a 2-axis turning machine rather than a live-tool or milling configuration. Buyers requiring driven tooling should consider the LYNX 220MA or other LYNX variants specifically designed for milling and rotary tooling.

---

DOOSAN LYNX 220A 2010 – TOOL CHANGER

Specification	Details
Turret Type	Hydraulic / Servo Turret
Number of Tool Stations	12
External Tool Size	25 × 25 mm / 1 × 1 in
Maximum Boring Bar Diameter	40 mm / 1.6 in
Turret Indexing Time	Approximately 0.11 sec

The 12-station turret provides flexibility for multiple turning, facing, boring, grooving, and threading tools, allowing several operations to be completed without manually changing tooling.

---

DOOSAN LYNX 220A 2010 – CONTROL SYSTEM

Specification	Details
CNC Control	DOOSAN FANUC i Series
Machine Configuration	2-Axis CNC
Programming	CNC G-Code
Control Type	FANUC-Based
Application	Turning / Production Machining

The LYNX 220A is documented with a DOOSAN FANUC i Series CNC control. This provides a familiar control environment for shops already operating FANUC-controlled turning equipment.

---

DOOSAN LYNX 220A 2010 – COOLANT / CHIP MANAGEMENT

Specification	Details
Coolant System	Standard
Coolant Pump Motor	0.18 kW
Chip Management	Enclosed Work Area
Lubrication System	Included
Work Area	Fully Enclosed

The enclosed work area and coolant system help manage chips and cutting fluid during production. Proper coolant maintenance is particularly important when purchasing a used LYNX 220A because pump condition, coolant delivery, way lubrication, and chip evacuation should all be inspected before installation.

---

DOOSAN LYNX 220A 2010 – POWER REQUIREMENTS

Specification	Details
Rated Power	23.68 kVA
Power Supply	3 × 200/220 VAC
Frequency	50/60 Hz
Full Load Current	62.15 A
Short-Circuit Withstand Capability	65 kA
Spindle Motor	15 kW

Electrical requirements should always be confirmed from the individual machine’s electrical nameplate and configuration before installation, especially for a used machine that may have been configured for a different facility.

---

DOOSAN LYNX 220A 2010 – DIMENSIONS

Specification	Details
Machine Length	Approximately 2,325 mm
Machine Width	Approximately 1,600 mm
Machine Height	Approximately 1,600 mm
Approximate Weight	2,900 kg / 6,393 lb
Footprint	Compact Production-Lathe Design

The compact dimensions make the LYNX 220A practical for facilities where floor space is limited. The approximately 2.9-ton machine weight should nevertheless be considered when planning transportation, rigging, and installation.

---

DOOSAN LYNX 220A 2010 – GENERAL INFORMATION

Specification	Details
Manufacturer	DOOSAN
Model	LYNX 220A
Year	2010
Machine Type	CNC Turning Center
Number of Axes	2
CNC Control	DOOSAN FANUC i Series
Chuck Size	6 in
Maximum RPM	6,000 RPM
Spindle Power	15 kW / approximately 20 HP
Turret	12 Station
Tailstock	Yes
Country of Manufacture	South Korea

The 2010 DOOSAN LYNX 220A is a compact production CNC lathe designed for reliable two-axis turning. Its combination of a high-speed spindle, 12-station turret, tailstock, and FANUC-based control makes it suitable for both production and general machining environments.

---

INDUSTRIES THAT USE DOOSAN LYNX 220A

The DOOSAN LYNX 220A is well suited for manufacturers that need repeatable 2-axis CNC turning of relatively compact components. Its 6,000 RPM spindle and compact work envelope make it particularly useful where production efficiency and short cycle times are important.

Common industries and applications include:

• Automotive component manufacturing
• General industrial manufacturing
• Oil and gas component production
• Hydraulic and pneumatic components
• Machinery and equipment manufacturing
• Job shops
• Contract machining
• Agricultural equipment components
• Industrial repair and replacement parts

The machine’s relatively small footprint also makes it useful for production departments that need additional turning capacity without dedicating a large amount of factory floor space.

---

TYPICAL PARTS DOOSAN LYNX 220A CAN PRODUCE

The DOOSAN LYNX 220A can produce a broad range of cylindrical and rotational components, particularly parts that fit within its approximately 320 mm maximum turning diameter and 322 mm turning-length capacity.

Typical parts include:

• Shafts
• Bushings
• Pins
• Collars
• Spacers
• Flanges
• Rollers
• Sleeves
• Hydraulic components
• Pneumatic components
• Threaded components
• Bearing-related components
• Automotive components
• Custom turned parts

With a 6-inch chuck, 1.8-inch bar capacity, 12-station turret, and 6,000 RPM spindle, the machine is particularly appropriate for repeat production of small-to-medium precision turned parts.

---

WHY CHOOSE DOOSAN LYNX 220A

The DOOSAN LYNX 220A is a practical choice for manufacturers that need a compact CNC turning center with a straightforward 2-axis configuration. Its 6,000 RPM spindle and approximately 20 HP motor provide a useful combination of speed and cutting capability for a wide range of materials and component sizes.

The machine’s 12-station turret, tailstock, compact footprint, and FANUC-based control further contribute to its versatility. For shops already familiar with FANUC programming, the control architecture can make integrating a used LYNX 220A into an existing production environment relatively straightforward.

---

WHY BUY USED DOOSAN LYNX 220A

Buying a used DOOSAN LYNX 220A can provide manufacturers with an economical way to add CNC turning capacity without investing in a new machine. The model has been available on the used market for years, and current listings continue to show 2010 LYNX 220A machines being offered for sale.

Many used machines can include valuable equipment and features such as:

• 6-inch hydraulic chuck
• 12-station turret
• Tailstock
• FANUC-based CNC control
• Coolant system
• Hydraulic system
• Enclosed work area
• Automatic lubrication
• Foot switch
• Work area lighting

When purchasing a used LYNX 220A, buyers should inspect spindle condition, turret indexing, chuck operation, tailstock movement, ballscrews, guideways, hydraulic system, coolant system, lubrication system, CNC control, and machine geometry. Actual equipment can vary between individual used machines, so the seller’s machine-specific specifications should always be verified before purchase.

---

HOW MUCH DOES A USED DOOSAN LYNX 220A COST?

The price of a used DOOSAN LYNX 220A can vary considerably depending on year, operating hours, condition, control configuration, tooling, chuck, maintenance history, and location. Current listings provide useful evidence of the market: one 2010 LYNX 220A is advertised at approximately €11,250, while another listing for a 2010 machine has been advertised at approximately €17,250.

These advertised prices demonstrate why the condition and included equipment of an individual used machine are important when determining its actual value. A machine with good spindle condition, accurate geometry, functioning turret, working tailstock, clean hydraulics, and a well-maintained FANUC control can command a higher price than a machine requiring repairs.

For buyers comparing used DOOSAN LYNX 220A machines, the best value is not necessarily the machine with the lowest asking price. Machine condition, included tooling, maintenance records, spindle hours, accuracy, and the cost of transportation and installation should all be considered when evaluating the total investment.