USED MAZAK QUICK TURN NEXUS 250MS – 2005

The MAZAK QUICK TURN NEXUS 250MS – 2005 is a CNC turning center designed for high-productivity turning, milling, drilling, tapping, and other secondary machining operations. The MS configuration adds milling capability through driven tooling, allowing manufacturers to complete additional operations without transferring the workpiece to a separate machining center.

The QUICK TURN NEXUS 250MS is part of Mazak’s widely used QUICK TURN NEXUS family, developed for flexible production and precision machining. Its combination of a rigid turning platform, live tooling, C-axis interpolation, and CNC control makes it suitable for both production environments and job shops.

A typical machine provides approximately 26 inches of swing over the bed, with roughly 17 inches of maximum turning diameter and 20 inches of turning length, depending on the exact configuration. The main spindle commonly operates at speeds up to approximately 4,000 RPM, while the driven-tool spindle provides high-speed milling capability.

The machine is well suited for machining shafts, bushings, flanges, fittings, housings, valve components, hydraulic components, and other precision turned parts. Typical operations include turning, facing, boring, threading, grooving, drilling, tapping, cross milling, and end milling.

A used 2005 MAZAK QUICK TURN NEXUS 250MS can be an attractive option for manufacturers seeking live-tooling capability at a substantially lower investment than a new multitasking CNC turning center.

---

MAZAK QUICK TURN NEXUS 250MS – 2005 – AXIS

Specification	Details
Machine Type	CNC Turning Center with Milling
Axis Configuration	2-Axis + C-Axis / Live Tooling
X-Axis Travel	Approx. 9.8″ / 250 mm
Z-Axis Travel	Approx. 20″ / 508 mm
C-Axis	Standard
Live Tooling	Standard
X-Axis Drive	Servo
Z-Axis Drive	Servo
C-Axis Interpolation	Standard
Tailstock	Configuration Dependent

---

MAZAK QUICK TURN NEXUS 250MS – 2005 – WORK ENVELOPE

Specification	Details
Swing Over Bed	Approx. 26″ / 660 mm
Maximum Turning Diameter	Approx. 17″ / 430 mm
Maximum Turning Length	Approx. 20″ / 508 mm
Chuck Size	Approx. 10″
Spindle Bore	Approx. 3.0″
Bar Capacity	Approx. 2.5″
Tailstock	Available
Steady Rest	Optional
Workholding	Hydraulic Chuck
Live Tool Machining	Supported

---

MAZAK QUICK TURN NEXUS 250MS – 2005 – MAIN SPINDLE

Specification	Details
Spindle Type	CNC Horizontal Turning Spindle
Spindle Motor	Approx. 25 HP
Maximum Spindle Speed	Approx. 4,000 RPM
Spindle Bore	Approx. 3.0″
Spindle Nose	A2-8
Chuck	Hydraulic
C-Axis	Standard
Constant Surface Speed	Standard
Spindle Orientation	Standard
Bar Work	Supported

The main spindle provides the torque and rigidity required for conventional turning while also supporting C-axis positioning and interpolation for live-tool operations.

---

MAZAK QUICK TURN NEXUS 250MS – 2005 – LIVE TOOLING

Specification	Details
Driven Tooling	Standard
Live Tool Spindle	Integrated
Maximum Live Tool Speed	Approx. 4,500 RPM
Tooling Type	Driven Tool Holders
C-Axis Interpolation	Standard
Cross Milling	Supported
End Milling	Supported
Drilling	Supported
Tapping	Supported
Radial Tooling	Supported

The MS configuration allows the machine to perform secondary milling and drilling operations directly on the turned component.

---

MAZAK QUICK TURN NEXUS 250MS – 2005 – TURRET

Specification	Details
Turret Type	Automatic Disc Turret
Tool Stations	Approx. 12
Live Tool Stations	Configuration Dependent
Turning Tools	Supported
Boring Bars	Supported
Driven Tools	Supported
Tool Indexing	Automatic
Hydraulic Clamping	Standard
Tool Offset Management	CNC Controlled
Tool-Life Management	Available

---

MAZAK QUICK TURN NEXUS 250MS – 2005 – CONTROL SYSTEM

Specification	Details
CNC Control	MAZATROL
Control Family	MAZATROL Fusion / Nexus Configuration
Display	Color LCD
Programming	MAZATROL / EIA G-Code
C-Axis Control	Standard
Live Tool Control	Standard
Tool Offset Management	Standard
Work Offset Management	Standard
Constant Surface Speed	Standard
Custom Macros	Available
Diagnostics	Standard
Data Transfer	Configuration Dependent

The exact control configuration should be verified on the individual 2005 machine because equipment and software options can vary.

---

MAZAK QUICK TURN NEXUS 250MS – 2005 – FEEDRATES

Specification	Details
X-Axis Rapid Traverse	Approx. 1,260 IPM
Z-Axis Rapid Traverse	Approx. 1,260 IPM
C-Axis Rapid Traverse	Configuration Dependent
Cutting Feedrate	Programmable
Feedrate Override	Standard
Linear Interpolation	Yes
Circular Interpolation	Yes
Threading Feed	Programmable
Servo Drives	AC Servo
Automatic Compensation	Available

---

MAZAK QUICK TURN NEXUS 250MS – 2005 – COOLANT & CHIP MANAGEMENT

Specification	Details
Flood Coolant	Standard
Coolant Tank	Standard
Coolant Pump	Standard
High-Pressure Coolant	Optional
Chip Conveyor	Available
Chip Auger	Available
Coolant Filtration	Standard
Mist Collector	Optional
Oil Skimmer	Optional
Automatic Lubrication	Standard

---

MAZAK QUICK TURN NEXUS 250MS – 2005 – PROBING & AUTOMATION

Specification	Details
Tool Presetter	Available
Tool Measurement	Optional
Workpiece Probe	Optional
Parts Catcher	Available
Bar Feeder	Available
Automatic Parts Handling	Configuration Dependent
Robot Integration	Supported
Automated Workholding	Supported
Chip Conveyor	Available
Lights-Out Production	Supported

---

MAZAK QUICK TURN NEXUS 250MS – 2005 – POWER REQUIREMENTS

Specification	Details
Main Spindle Motor	Approx. 25 HP
Live Tool Motor	Configuration Dependent
Electrical Service	Three-Phase
Input Voltage	Configuration Dependent
Frequency	50 / 60 Hz
Shop Air	Required
Hydraulic System	Standard
Lubrication System	Automatic
Electrical Cabinet	Mazak
Installation	Industrial

---

MAZAK QUICK TURN NEXUS 250MS – 2005 – DIMENSIONS

Specification	Details
Machine Width	Approx. 120–135″
Machine Depth	Approx. 75–85″
Machine Height	Approx. 80–90″
Machine Weight	Approx. 12,000–15,000 lbs
Floor Space	Medium / Large
Chip Conveyor	Adds Overall Length
Bar Feeder	Adds Overall Length
Rigging	Required
Installation	Industrial

---

MAZAK QUICK TURN NEXUS 250MS – 2005 – GENERAL INFORMATION

Specification	Details
Manufacturer	Mazak
Model	QUICK TURN NEXUS 250MS
Year	2005
Machine Category	CNC Turning Center
Axis Configuration	2-Axis + C-Axis
Maximum Turning Diameter	Approx. 17″
Maximum Turning Length	Approx. 20″
Swing Over Bed	Approx. 26″
Chuck Size	Approx. 10″
Spindle Bore	Approx. 3.0″
Maximum Spindle Speed	Approx. 4,000 RPM
Spindle Power	Approx. 25 HP
Live Tooling	Yes
CNC Control	MAZATROL

---

INDUSTRIES THAT USE MAZAK QUICK TURN NEXUS 250MS

The MAZAK QUICK TURN NEXUS 250MS is well suited for:

• Automotive
• Aerospace
• Medical
• Defense
• Oil & Gas
• Energy
• Hydraulics
• Industrial Equipment
• General Manufacturing
• Precision Engineering
• Contract Machining
• Tool & Die

---

TYPICAL PARTS MAZAK QUICK TURN NEXUS 250MS CAN PRODUCE

Typical components include:

• Shafts
• Bushings
• Flanges
• Valve components
• Hydraulic fittings
• Pump components
• Housings
• Couplings
• Automotive components
• Aerospace fittings
• Precision bushings
• Industrial machine components

Typical operations include turning, facing, boring, threading, grooving, drilling, tapping, cross milling, end milling, slotting, and C-axis interpolation.

---

WHY CHOOSE MAZAK QUICK TURN NEXUS 250MS

The biggest advantage of the MAZAK QUICK TURN NEXUS 250MS is the ability to combine conventional CNC turning with live-tool machining. A manufacturer can turn a component and then perform drilling, milling, tapping, or slotting operations without removing the workpiece from the chuck.

This reduces setup time and helps maintain positional accuracy between turned and milled features. The C-axis also allows the spindle to position and interpolate the workpiece for additional machining operations.

The machine is particularly valuable for components requiring features on multiple faces. Instead of transferring parts between a CNC lathe and machining center, many parts can be completed on the same machine.

---

WHY BUY USED MAZAK QUICK TURN NEXUS 250MS – 2005

A used 2005 MAZAK QUICK TURN NEXUS 250MS can provide excellent production flexibility at a relatively low acquisition cost. Its live-tooling capability gives it considerably more functionality than a conventional 2-axis CNC lathe.

When evaluating a used machine, inspect the main spindle, live-tool spindle, C-axis, turret, ballscrews, linear guideways, chuck, hydraulic system, coolant system, and CNC control.

Buyers should verify spindle runout, live-tool operation, C-axis positioning accuracy, turret indexing, chuck clamping pressure, axis backlash, spindle hours, and machine geometry.

Machines equipped with chip conveyors, bar feeders, parts catchers, probing, high-pressure coolant, tooling packages, and complete driven-tool holders can command a premium.

---

HOW MUCH DOES A USED MAZAK QUICK TURN NEXUS 250MS – 2005 COST?

The market value of a used MAZAK QUICK TURN NEXUS 250MS – 2005 depends on spindle hours, machine condition, control configuration, live-tool equipment, tooling, automation, and maintenance history.

USED MAZAK QUICK TURN NEXUS 250MS – 2005 PRICE RANGE	ESTIMATED COST
High Hours / Basic Configuration	$30,000 – $40,000
Functional Production Machine	$40,000 – $50,000
Good Condition / Production Ready	$50,000 – $65,000
Excellent / Well Equipped	$65,000 – $80,000
Low Hours / Fully Equipped	$80,000 – $95,000+

For a 2005 MAZAK QUICK TURN NEXUS 250MS in good working condition, a realistic market value is approximately $45,000–$65,000 USD.

For your inventory listing, a recommended asking-price range is $55,000–$75,000 USD for a clean machine equipped with MAZATROL control, live tooling, C-axis, hydraulic chuck, chip conveyor, bar feeder, parts catcher, probing, and complete tooling.

Best estimated listing value: $55,000–$75,000 USD.