USED HAAS TM1 2002

The HAAS TM1 2002 is a compact and reliable CNC Toolroom Vertical Machining Center (VMC) designed for prototype machining, job shops, tooling applications, repair work, education, and small production manufacturing. The TM1 was developed by Haas Automation to provide manufacturers with an affordable CNC machining solution that combines the flexibility of a manual toolroom mill with the accuracy and repeatability of CNC control. The 2002 HAAS TM1 features a rigid machine structure, CAT40 spindle taper, Haas CNC Control, and a practical machining envelope suitable for a wide range of milling applications.

The HAAS TM1 2002 provides approximately 762 mm (30″) X-axis travel, 305–406 mm (12–16″) Y-axis travel depending on configuration, and 406 mm (16″) Z-axis travel, allowing manufacturers to machine fixtures, brackets, tooling components, prototype parts, and small production components. The machine is equipped with a 47.5″ × 10.5″ table, CAT40 spindle taper, 4,000 RPM spindle speed, and a 7.5 HP spindle motor. The TM1 was designed to deliver full CNC machining capability while maintaining a compact footprint and straightforward operation.

The 2002 HAAS TM1 was one of Haas Automation’s early CNC Toolroom Mill models and became popular among small machine shops because of its affordability, simple programming interface, and low operating cost. The machine can be operated using Haas conversational programming or standard G-code, making it suitable for both experienced CNC operators and shops transitioning from conventional milling equipment.

Purchasing a used HAAS TM1 2002 allows manufacturers to acquire a dependable CNC milling machine at a significantly lower investment compared with newer equipment. With widely available Haas replacement parts, simple maintenance requirements, and proven reliability, the TM1 remains a practical choice for prototype shops, maintenance departments, educational facilities, and small manufacturers.

HAAS TM1 2002 – AXIS

HAAS TM1 2002 – AXIS TRAVELS / WORK ENVELOPE

HAAS TM1 2002 – CAPACITY

HAAS TM1 2002 – SPINDLE

HAAS TM1 2002 – TOOLING / TOOL CHANGER

HAAS TM1 2002 – CONTROL SYSTEM

HAAS TM1 2002 – COOLANT / CHIP MANAGEMENT

HAAS TM1 2002 – POWER REQUIREMENTS

HAAS TM1 2002 – DIMENSIONS

HAAS TM1 2002 – GENERAL INFORMATION

INDUSTRIES THAT USE HAAS TM1 2002

The HAAS TM1 2002 is widely used in aerospace, automotive, defense, tooling, prototype manufacturing, education, repair facilities, and general machining environments.

Its compact design and CNC capability make it suitable for producing:

• Prototype components
• Fixtures and jigs
• Tooling plates
• Aluminum parts
• Machine brackets
• Repair components
• Small molds
• Custom production parts

The TM1 is especially valuable for smaller shops requiring CNC capability without the cost and floor space requirements of a larger VMC.

TYPICAL PARTS HAAS TM1 2002 CAN PRODUCE

The HAAS TM1 2002 can manufacture:

• Fixture plates
• Machine brackets
• Aluminum housings
• Tooling components
• Jigs and fixtures
• Prototype parts
• Mold inserts
• Automotive components
• Aerospace brackets
• Custom-machined replacement parts

The machine performs milling, drilling, tapping, boring, pocket machining, contouring, and precision finishing operations.

WHY CHOOSE HAAS TM1 2002

The HAAS TM1 2002 provides an excellent balance of affordability, reliability, and CNC capability. Its CAT40 spindle and rigid construction allow it to machine aluminum, steel, stainless steel, plastics, and other common manufacturing materials.

Compared with manual milling machines, the TM1 provides CNC automation, improved repeatability, faster setup changes, and the ability to store and repeat machining programs.

Its compact footprint makes it an excellent choice for job shops, educational facilities, maintenance departments, and manufacturers requiring economical CNC milling capability.

WHY BUY USED HAAS TM1 2002

Purchasing a used HAAS TM1 2002 allows manufacturers to obtain a capable CNC toolroom mill at a lower cost compared with newer machines.

Many used TM1 machines may include valuable options such as:

• Automatic tool changer
• Rigid tapping
• Fourth-axis preparation
• Rotary table capability
• Coolant systems
• Probing systems
• Tooling packages

Before purchasing, buyers should inspect:

• Spindle condition
• Axis accuracy
• Ballscrews and ways
• CNC electronics
• Coolant system
• Lubrication system
• Maintenance history

Machines with documented service records generally provide better long-term value.

HOW MUCH DOES A USED HAAS TM1 2002 COST?

The value of a used HAAS TM1 2002 depends on spindle hours, machine condition, CNC control condition, installed options, tooling package, and maintenance history.

Machines equipped with automatic tool changers, rotary capability, probing systems, coolant systems, and complete tooling packages generally command higher resale values.

Depending on condition and configuration, a used HAAS TM1 2002 typically sells within an estimated price range of $8,000 to $18,000 USD.

Machines with excellent maintenance records, upgraded controls, and additional accessories may sell near the higher end of the range, while machines requiring refurbishment may sell below it.

A properly maintained HAAS TM1 2002 remains an economical and reliable CNC machining solution for job shops, manufacturers, and educational facilities requiring affordable CNC milling capability.