USED HAAS TM2P – 2020

The HAAS TM2P – 2020 is a CNC toolroom vertical machining center designed for shops that need the flexibility of a toolroom mill with the productivity and precision of CNC operation. The TM2P is part of Haas’ TM-P Series and offers a large work envelope while maintaining a relatively compact machine footprint. It is particularly suitable for job shops, prototype manufacturing, tooling, maintenance, education, and small-batch production.

The TM2P provides 40 inches of X-axis travel, 16 inches of Y-axis travel, and 16 inches of Z-axis travel. It uses a 40-taper, 6,000 RPM direct-speed belt-drive spindle rated at 7.5 HP. The machine is equipped with a 10-pocket automatic tool changer, allowing it to perform multiple machining operations without manual tool changes. Haas also designed the TM-P series to operate on either single- or three-phase power, making it flexible for different shop environments.

The TM2P’s long 57.8-inch table and 40-inch X-axis travel make it especially useful for long plates, fixtures, tooling components, brackets, and other workpieces that benefit from a larger working area. The machine also supports Haas conversational programming, making it accessible to operators who may not be experienced with conventional G-code programming.

---

HAAS TM2P – 2020 – AXIS

Specification	Details
Machine Type	CNC Toolroom Vertical Machining Center
Axis Configuration	3-Axis
X-Axis Travel	40″ / 1,016 mm
Y-Axis Travel	16″ / 406 mm
Z-Axis Travel	16″ / 406 mm
4th-Axis Capability	Available
Rotary Integration	Available
CNC Interpolation	3-Axis
Spindle Orientation	Available
Rigid Tapping	Available

---

HAAS TM2P – 2020 – AXIS TRAVELS / WORK ENVELOPE

Specification	Details
X-Axis Travel	40″ / 1,016 mm
Y-Axis Travel	16″ / 406 mm
Z-Axis Travel	16″ / 406 mm
Spindle Nose to Table Maximum	20″ / 508 mm
Spindle Nose to Table Minimum	4″ / 102 mm
Work Envelope	40″ x 16″ x 16″
Table Length	57.8″ / 1,466 mm
Table Width	10.5″ / 267 mm
Maximum Table Load	350 lbs / 159 kg

The TM2P provides the same substantial 40-inch X-axis travel as the larger TM3P while using a narrower 10.5-inch table. Haas specifies a maximum evenly distributed table load of 350 pounds for the current TM2P specification.

---

HAAS TM2P – 2020 – CAPACITY / TABLE

Specification	Details
Table Length	57.8″ / 1,466 mm
Table Width	10.5″ / 267 mm
T-Slot Width	0.626–0.630″ / 15.9–16.0 mm
T-Slot Center Distance	4″ / 102 mm
Number of Standard T-Slots	3
Maximum Table Load	350 lbs / 159 kg
Workholding	Vise / Fixture / Rotary
4th-Axis Integration	Available
Table Type	Fixed T-Slot

---

HAAS TM2P – 2020 – SPINDLE

Specification	Details
Spindle Type	Direct-Speed Belt Drive
Spindle Taper	CT40 / BT40
Maximum Spindle Speed	6,000 RPM
Spindle Motor	7.5 HP / 5.6 kW
Maximum Torque	33 ft-lb @ 1,200 RPM
Bearing Lubrication	Grease Packed
Spindle Cooling	Air Cooled
Spindle Orientation	Available
Tool Retention	Automatic

The TM2P’s 7.5 HP, 6,000 RPM, 40-taper spindle is designed for general-purpose milling rather than high-speed production. Its 33 ft-lb torque rating at 1,200 RPM provides useful cutting capability for common tooling and materials.

---

HAAS TM2P – 2020 – TOOL CHANGER

Specification	Details
Tool Changer Type	Carousel
Tool Capacity	10 Stations
Tool Taper	CT40 / BT40
Maximum Tool Diameter	3.5″ / 89 mm
Maximum Tool Weight	12 lbs / 5.4 kg
Tool-to-Tool Time	Approx. 5.7 sec
Chip-to-Chip Time	Approx. 6.5 sec
Automatic Tool Change	Yes
Tool Management	CNC Controlled

The TM2P’s 10-pocket carousel automatic tool changer is useful for production sequences requiring several different tools. Haas specifies approximately 5.7 seconds tool-to-tool and 6.5 seconds chip-to-chip changing times.

---

HAAS TM2P – 2020 – CONTROL SYSTEM

Specification	Details
CNC Control	Haas CNC Control
Programming	G-Code / Conversational
Conversational Programming	Yes
HaasConnect	Available
Wireless Intuitive Probing	Available
Rigid Tapping	Available
Tool Offset Management	Yes
Work Offset Management	Yes
USB Connectivity	Configuration Dependent
Ethernet Connectivity	Configuration Dependent

The TM-P series is designed around Haas’ user-friendly CNC control and conversational programming system. Haas also offers Wireless Intuitive Probing System (WIPS) for simplified work-offset and tool-length measurement.

---

HAAS TM2P – 2020 – FEEDRATES

Specification	Details
X-Axis Rapid Traverse	400 IPM / 10.2 m/min
Y-Axis Rapid Traverse	400 IPM / 10.2 m/min
Z-Axis Rapid Traverse	400 IPM / 10.2 m/min
Maximum Cutting Feedrate	400 IPM / 10.2 m/min
Maximum X Thrust	2,000 lbf / 8,896 N
Maximum Y Thrust	2,000 lbf / 8,896 N
Maximum Z Thrust	2,000 lbf / 8,896 N
Feedrate Override	Standard
Linear Interpolation	Yes
Circular Interpolation	Yes

Haas specifies 400 IPM rapid traverse and maximum cutting feedrate for X, Y, and Z on the TM2P.

---

HAAS TM2P – 2020 – COOLANT & CHIP MANAGEMENT

Specification	Details
Flood Coolant	Available
Coolant System	Standard / Configuration Dependent
Coolant Pump	Available
Programmable Coolant	Available
Chip Auger	Configuration Dependent
Chip Conveyor	Configuration Dependent
Air Blast	Available
Through-Spindle Coolant	Optional
Coolant Filtration	Configuration Dependent
Mist Collector	Optional

The exact coolant and chip-management equipment on a 2020 machine should be verified from its option list. The TM-P platform supports additional coolant and chip-management equipment beyond the basic configuration.

---

HAAS TM2P – 2020 – AUTOMATION / PROBING

Specification	Details
Wireless Intuitive Probing System	Available
Work Probe	Available
Tool Probe	Available
4th-Axis Drive	Available
4th-Axis Wiring	Available
Rigid Tapping	Available
Automatic Tool Changer	Standard
Conversational Programming	Standard
HaasConnect	Available
Rotary Table Integration	Available

The TM2P can be configured for 4th-axis machining and probing, giving it more flexibility than a basic 3-axis toolroom mill. Haas specifically promotes WIPS for establishing work offsets and tool-length offsets and for in-process inspection.

---

HAAS TM2P – 2020 – POWER REQUIREMENTS

Specification	Details
Spindle Motor	7.5 HP / 5.6 kW
Single-Phase Input	220 VAC
Single-Phase Full Load	40 A
Three-Phase Low Voltage	220 VAC
Three-Phase Low Voltage Full Load	25 A
Three-Phase High Voltage	440 VAC
Three-Phase High Voltage Full Load	13 A
Electrical Service	Single- or Three-Phase
Shop Air	Required
Air Requirement	4 SCFM @ 100 PSI

Haas specifies single-phase 220 VAC operation as well as 220/440 VAC three-phase configurations for the TM2P. The machine requires approximately 4 SCFM at 100 PSI of compressed air.

---

HAAS TM2P – 2020 – DIMENSIONS

Specification	Details
Shipping Length	Approx. 127″
Shipping Width	Approx. 78″
Shipping Height	Approx. 100″
Shipping Weight	Approx. 5,060 lbs
Metric Weight	Approx. 2,295 kg
Floor Space	Compact Toolroom Configuration
Installation	Industrial
Rigging	Required

Haas’ published specifications list shipping dimensions of approximately 127 x 78 x 100 inches and a shipping weight of approximately 5,060 pounds for the standard configuration.

---

HAAS TM2P – 2020 – GENERAL INFORMATION

Specification	Details
Manufacturer	Haas
Model	TM2P
Year	2020
Machine Category	Vertical Machining Center
Machine Type	CNC Toolroom Mill
Axis Configuration	3-Axis
X-Axis Travel	40″
Y-Axis Travel	16″
Z-Axis Travel	16″
Table Size	57.8″ x 10.5″
Maximum Table Load	350 lbs
Spindle Speed	6,000 RPM
Spindle Power	7.5 HP
Spindle Taper	CT40 / BT40
Tool Capacity	10 Stations
Maximum Cutting Feedrate	400 IPM
CNC Control	Haas CNC
4th-Axis Ready	Available
Shipping Weight	Approx. 5,060 lbs

---

INDUSTRIES THAT USE HAAS TM2P

The HAAS TM2P is suitable for a wide range of manufacturing applications, including:

• General machine shops
• Aerospace
• Automotive
• Defense
• Tool and die
• Mold manufacturing
• Maintenance and repair
• Prototype manufacturing
• Educational facilities
• Industrial machinery
• Contract manufacturing
• Precision engineering
• Fabrication

It is especially useful for shops that need large X-axis travel without investing in a larger production VMC.

---

TYPICAL PARTS HAAS TM2P CAN PRODUCE

The TM2P can produce:

• Brackets
• Mounting plates
• Fixtures
• Jigs
• Housings
• Flanges
• Tooling components
• Prototype parts
• Machine components
• Automotive components
• Aerospace components
• Industrial brackets
• Custom production parts
• Repair components

Typical operations include face milling, pocketing, contouring, drilling, boring, tapping, reaming, slotting, and 3-axis profiling.

---

WHY CHOOSE HAAS TM2P

The primary advantage of the HAAS TM2P is its combination of a 40-inch X-axis travel, 16-inch Y-axis travel, and 16-inch Z-axis travel with a relatively compact toolroom-mill configuration. This gives manufacturers a substantial work envelope without requiring the footprint of a conventional full-size VMC.

The 40-taper, 7.5 HP, 6,000 RPM spindle provides a practical balance between power and versatility for general-purpose machining. The 10-tool automatic changer also allows multiple operations to be performed in sequence without manual tool changes.

The machine’s conversational programming system is another advantage, particularly for prototype and job-shop environments. Operators can use Haas’ programming templates rather than relying entirely on manually written G-code.

---

WHY BUY USED HAAS TM2P – 2020

A used 2020 HAAS TM2P can be an attractive option for a shop that wants a relatively recent CNC toolroom mill at a lower cost than buying new.

The 2020 model year is particularly appealing because the machine offers the modern TM-P platform’s 40 x 16 x 16-inch travels, 6,000 RPM 40-taper spindle, 10-tool ATC, 400 IPM rapids, and Haas CNC control.

Before purchasing a used TM2P, buyers should inspect the spindle, ballscrews, linear guides, table, tool changer, drawbar, control electronics, coolant system, lubrication system, and electrical cabinet.

It is also important to request power-on hours, cutting hours, spindle hours, maintenance records, alarm history, crash history, and a test-cut demonstration.

A 2020 machine may have significantly different value depending on whether it includes WIPS probing, 4th-axis drive and wiring, additional coolant equipment, chip management, and other Haas options.

---

HOW MUCH DOES A USED HAAS TM2P – 2020 COST?

The value of a 2020 HAAS TM2P depends primarily on machine hours, physical condition, spindle condition, options, included tooling, and whether the machine is ready for immediate production.

The TM2P was positioned as an affordable CNC toolroom machine, and its relatively simple design makes it a popular option for shops transitioning from manual milling to CNC. The model’s current specification includes a 10-tool ATC, 7.5 HP spindle, 6,000 RPM maximum speed, and 40 x 16 x 16-inch travels.

I would use the following as a practical estimated used-market range for a 2020 machine:

USED HAAS TM2P – 2020 PRICE RANGE	ESTIMATED COST
High Hours / Basic Configuration	$30,000 – $38,000
Functional Used Machine	$38,000 – $45,000
Good Condition / Production Ready	$45,000 – $52,000
Excellent / Well Equipped	$52,000 – $60,000
Very Low Hours / Premium Configuration	$60,000+

For a 2020 HAAS TM2P in good working condition, I would estimate approximately $40,000–$55,000 USD.

For your inventory listing, I would recommend a practical estimated asking-price range of $45,000–$55,000 USD for a clean, operational machine.

A low-hour machine with WIPS probing, 4th-axis capability, additional coolant equipment, excellent spindle condition, and complete tooling could reasonably command $55,000–$60,000+.

A high-hour machine with mechanical wear, missing accessories, or repair requirements could fall closer to $30,000–$40,000.

Best estimated listing value: $45,000–$55,000 USD.

For an actual listing, I would verify the machine’s hour meter, spindle hours, installed options, control version, spindle condition, and 4th-axis equipment before setting the final asking price.