USED HAAS TM3 2008

The HAAS TM3 2008 is a reliable CNC Toolroom Vertical Machining Center (VMC) designed for prototype machining, job shop production, tooling, maintenance, and general manufacturing applications. The TM3 combines the simplicity and affordability of a traditional toolroom mill with the automation and precision of a CNC machining center. Built with a rigid cast-iron structure, CAT40 spindle, Haas CNC Control, and large work envelope, the 2008 HAAS TM3 provides an excellent balance of versatility, accuracy, and value for manufacturers requiring dependable CNC milling capability.

The HAAS TM3 2008 offers 1,016 mm (40″) X-axis travel, 508 mm (20″) Y-axis travel, and 406 mm (16″) Z-axis travel, making it capable of machining larger fixtures, plates, molds, brackets, and production components compared with smaller toolroom mills. The machine features a 1,467 × 368 mm (57.75″ × 14.5″) table, a CAT40 spindle taper, 4,000 RPM spindle speed, approximately 7.5 HP spindle motor, and a 20-tool automatic tool changer. Standard features include Haas CNC Control, automatic lubrication, flood coolant, rigid machine construction, and 3-axis machining capability. Many used TM3 machines are equipped with options such as rigid tapping, chip auger, programmable coolant, probing systems, fourth-axis preparation, additional memory, and tooling packages. Actual specifications may vary depending on factory configuration and upgrades.

Purchasing a used HAAS TM3 2008 allows manufacturers and job shops to obtain a dependable CNC milling machine at a significantly lower cost than purchasing new equipment. With Haas’ widespread parts availability, simple CNC operation, and strong aftermarket support, the TM3 remains a practical and economical machining solution for shops requiring a large-travel toolroom CNC mill.

HAAS TM3 2008 – AXIS

HAAS TM3 2008 – AXIS TRAVELS / WORK ENVELOPE

HAAS TM3 2008 – CAPACITY

HAAS TM3 2008 – SPINDLE

HAAS TM3 2008 – TOOL CHANGER

HAAS TM3 2008 – CONTROL SYSTEM

HAAS TM3 2008 – COOLANT / CHIP MANAGEMENT

HAAS TM3 2008 – POWER REQUIREMENTS

HAAS TM3 2008 – DIMENSIONS

HAAS TM3 2008 – GENERAL INFORMATION

INDUSTRIES THAT USE HAAS TM3 2008

The HAAS TM3 2008 is widely used in aerospace, automotive, defense, tooling, prototype manufacturing, education, maintenance departments, machine shops, and general manufacturing environments.

Its large X-axis travel and versatile tooling capability make it suitable for manufacturers producing fixtures, plates, brackets, molds, tooling components, and custom-machined parts.

TYPICAL PARTS HAAS TM3 2008 CAN PRODUCE

The HAAS TM3 2008 can manufacture:

• Fixture plates
• Machine brackets
• Aluminum housings
• Tooling components
• Jigs and fixtures
• Prototype parts
• Mold components
• Automotive parts
• Aerospace brackets
• Custom production components

The machine performs milling, drilling, tapping, boring, pocket machining, contouring, engraving, and precision finishing operations.

WHY CHOOSE HAAS TM3 2008

The HAAS TM3 2008 provides a strong combination of large machining capacity, simple operation, and affordable ownership. Its CAT40 spindle, automatic tool changer, and Haas CNC Control make it suitable for a wide range of machining applications.

Compared with manual toolroom mills, the TM3 provides improved repeatability, CNC automation, and the ability to run production programs while maintaining the flexibility required for prototype and custom work.

The machine is especially valuable for smaller shops that need a reliable CNC mill without investing in a larger production VMC.

WHY BUY USED HAAS TM3 2008

Purchasing a used HAAS TM3 2008 allows manufacturers to obtain a capable CNC toolroom mill at a lower investment compared with newer equipment.

Many used TM3 machines include valuable options such as:

• 20-tool automatic tool changer
• Rigid tapping
• Chip auger
• Programmable coolant
• Rotary fourth-axis preparation
• Tooling packages
• Probing systems

Before purchasing, buyers should inspect spindle condition, axis accuracy, ballscrews, way covers, tool changer operation, coolant system, CNC electronics, and maintenance records.

Machines with documented service history and lower operating hours generally provide the best long-term value.

HOW MUCH DOES A USED HAAS TM3 2008 COST?

The value of a used HAAS TM3 2008 depends on spindle hours, machine condition, installed options, tooling package, CNC control condition, and maintenance history.

Machines equipped with 20-tool changers, probing systems, chip removal systems, rotary capability, and complete tooling packages generally command higher resale prices.

Depending on condition, spindle hours, and included options, a used HAAS TM3 2008 typically sells within an estimated price range of $18,000 to $35,000 USD.

Machines with excellent maintenance records, additional accessories, and low operating hours may exceed this range, while machines requiring repairs or refurbishment may sell below it.

A properly maintained HAAS TM3 2008 remains an excellent value CNC machining center for job shops, manufacturers, and educational facilities requiring reliable and affordable milling capability.