USED MORI SEIKI NZX-1500/800SY2 – 2014

The MORI SEIKI NZX-1500/800SY2 – 2014 is a high-capacity multi-axis CNC turning center designed for complex production machining using twin spindles, twin turrets, Y-axis milling, and live tooling. The machine is capable of performing turning, facing, boring, threading, drilling, milling, and other operations in a single setup, reducing workholding changes and improving positional accuracy.

The NZX-1500/800SY2 provides approximately 8.3 inches of X-axis travel, 4.3 inches of Y-axis travel, and 31.9 inches of Z-axis travel, with a maximum turning diameter around 11.8–12.5 inches and machining length around 31 inches depending on configuration. Used 2014 examples are documented with 6,000 RPM spindle speed, 30 HP spindle power, 2-inch bar capacity, FANUC 31iA control, twin turrets, sub-spindle, live tooling, and 5-axis or greater machining capability.

This machine is particularly valuable for manufacturers producing complex components that would otherwise require multiple CNC machines or several setups. Its twin-spindle and twin-turret architecture allows operations to be divided between multiple cutting systems, increasing productivity and reducing non-cutting time.

---

MORI SEIKI NZX-1500/800SY2 – 2014 – AXIS

Specification	Details
Machine Type	Multi-Axis CNC Turning Center
Axis Configuration	6-Axis
X-Axis	8.3″
Y-Axis	Approx. 4.3″
Z-Axis	Approx. 31.9″
B-Axis	Approx. 35.4″ Sub-Spindle Transfer
C-Axis	Main and Sub-Spindle
Main Spindle	Yes
Sub-Spindle	Yes
Upper Turret	Yes
Lower Turret	Yes
Live Tooling	Yes
Y-Axis Milling	Yes

The NZX-1500/800SY2 is generally classified as a 6-axis machine, with twin spindle and twin turret architecture.

---

MORI SEIKI NZX-1500/800SY2 – 2014 – AXIS TRAVELS / WORK ENVELOPE

Specification	Details
X-Axis Travel	Approx. 8.3″ / 210 mm
Y-Axis Travel	Approx. 4.3″ / 110 mm
Z-Axis Travel	Approx. 31.9″ / 810 mm
B-Axis / Sub-Spindle Travel	Approx. 35.4″
Maximum Turning Diameter	Approx. 11.8–12.5″
Maximum Machining Length	Approx. 31–31.5″
Swing Over Bed	Approx. 31.5″
Rapid X	Approx. 1,181 IPM
Rapid Y	Approx. 787 IPM
Rapid Z	Approx. 1,968 IPM

Published specifications for the NZX-1500/800SY2 show approximately 210 mm X, 110 mm Y, and 810 mm Z travel, while current 2014 listings report approximately 12.5-inch turning diameter and 31-inch machining length.

---

MORI SEIKI NZX-1500/800SY2 – 2014 – CAPACITY / WORKHOLDING

Specification	Details
Main Chuck	Approx. 8″
Sub-Spindle Chuck	Configuration Dependent
Bar Capacity	Approx. 2″ / 52 mm
Spindle Bore	Approx. 61 mm
Spindle Nose	JIS A2-5
Maximum Turning Diameter	Approx. 11.8–12.5″
Maximum Machining Length	Approx. 31″
Tailstock	No
Workholding	Chuck / Collet / Fixture Dependent
C-Axis	Yes

The machine is designed around approximately 2-inch bar capacity, with the twin-spindle configuration allowing workpieces to be transferred between the main and sub-spindles for complete machining.

---

MORI SEIKI NZX-1500/800SY2 – 2014 – SPINDLE

Specification	Details
Main Spindle	CNC Turning Spindle
Main Spindle Speed	Up to 6,000 RPM
Main Spindle Power	Approx. 30 HP
Sub-Spindle	CNC Turning Spindle
Sub-Spindle Speed	Up to 6,000 RPM
Spindle Bore	Approx. 61 mm
Bar Capacity	Approx. 2″
Spindle Nose	JIS A2-5
C-Axis	Yes
Spindle Orientation	Yes

A current 2014 NZX-1500/800SY2 listing specifies 6,000 RPM maximum speed, 30 HP power, and 2-inch bar capacity.

The spindle should be one of the most important inspection points when purchasing a used machine. Buyers should check spindle runout, bearing noise, thermal stability, chuck operation, drawtube condition, C-axis positioning, and performance across the full speed range.

---

MORI SEIKI NZX-1500/800SY2 – 2014 – TOOL TURRETS

Specification	Details
Number of Turrets	2
Upper Turret	Yes
Lower Turret	Yes
Turret Stations	Approx. 16 Each
Live Tooling	Yes
Static Tooling	Yes
Tool Presetter	Available
Boring Bar Capacity	Configuration Dependent
Tool Indexing	Automatic
Simultaneous Machining	Supported

The NZX-1500/800SY2 uses twin turrets, with used listings documenting 16 positions on each turret. Live tooling enables milling, drilling, and other rotary-tool operations.

---

MORI SEIKI NZX-1500/800SY2 – 2014 – CONTROL SYSTEM

Specification	Details
CNC Control	FANUC 31iA
Control Type	Multi-Axis CNC
Programming	G-Code / ISO
Axis Control	Multi-Axis
Tool Offset Management	Standard
Canned Cycles	Standard
C-Axis Control	Yes
Y-Axis Control	Yes
Sub-Spindle Control	Yes
Diagnostics	FANUC Diagnostics

A 2014 NZX-1500/800SY2 currently listed in Illinois is equipped with a FANUC 31iA CNC control.

---

MORI SEIKI NZX-1500/800SY2 – 2014 – FEEDRATES

Specification	Details
X-Axis Rapid Traverse	Approx. 1,181 IPM
Y-Axis Rapid Traverse	Approx. 787 IPM
Z-Axis Rapid Traverse	Approx. 1,968 IPM
X Rapid	Approx. 30 m/min
Y Rapid	Approx. 20 m/min
Z Rapid	Approx. 50 m/min
Cutting Feedrate	CNC Controlled
Feedrate Override	Standard
Interpolation	Linear / Circular / Multi-Axis

Published NZX-1500/800SY2 specifications list 30 m/min X, 20 m/min Y, and 50 m/min Z rapid traverse rates.

---

MORI SEIKI NZX-1500/800SY2 – 2014 – COOLANT & CHIP MANAGEMENT

Specification	Details
Flood Coolant	Equipped
Coolant Tank	Equipped
Chip Conveyor	Available / Equipped on Used Machines
High-Pressure Coolant	Available
Through-Spindle Coolant	Configuration Dependent
Mist Collector	Available
Oil Skimmer	Optional
Coolant Filtration	Configuration Dependent
Chip Evacuation	Automatic

Used NZX machines are commonly equipped with chip conveyors and mist collectors, while high-pressure and through-spindle coolant options depend on the individual machine.

---

MORI SEIKI NZX-1500/800SY2 – 2014 – LIVE TOOLING / MILLING

Specification	Details
Live Tooling	Yes
Y-Axis Milling	Yes
C-Axis	Yes
Milling Operations	Drilling / Milling / Tapping
Driven Tool Power	Approx. 7.5 / 5.5 kW
Driven Tool Speed	Up to 6,000 RPM
Tool Stations	16 Per Turret
Milling Capability	Off-Centerline
5-Axis Capability	Yes

The NZX-1500/800SY2 is significantly more capable than a conventional turning center because the Y-axis, C-axis, and live tooling allow milling and drilling operations to be completed without transferring the workpiece to another machine.

---

MORI SEIKI NZX-1500/800SY2 – 2014 – AUTOMATION / PROBING

Specification	Details
Sub-Spindle	Yes
Twin Turrets	Yes
Bar Feeder	Available
Parts Handling	Configuration Dependent
Robot Integration	Available
Fanuc Robot	Equipped on Some Machines
Tool Presetter	Available
Chip Conveyor	Available
Mist Collector	Available
Automated Production	Yes

The NZX platform is well suited to automation. One current 2014 NZX-1500/800SY2 listing includes a Fanuc robot, while other NZX machines have been equipped with bar feeders and automated loading systems.

---

MORI SEIKI NZX-1500/800SY2 – 2014 – POWER REQUIREMENTS

Specification	Details
Main Spindle Power	Approx. 30 HP
Spindle Motor	Configuration Dependent
Electrical Service	3-Phase Industrial
Voltage	Configuration Dependent
Frequency	Configuration Dependent
Transformer	Configuration Dependent
Shop Air	Required
Electrical Cabinet	Integrated
Total Power Requirement	Configuration Dependent

The exact electrical requirement should be verified from the individual machine’s electrical data plate because accessories such as high-pressure coolant, bar feeders, robots, and chip conveyors can alter total power requirements.

---

MORI SEIKI NZX-1500/800SY2 – 2014 – DIMENSIONS

Specification	Details
Approximate Length	155″
Approximate Width	144″
Approximate Height	107″
Approximate Weight	18,300 lbs
Metric Weight	Approx. 8,300 kg
Floor Space	Large
Installation	Industrial
Rigging	Heavy Machine Rigging

A 2014 NZX-1500/800SY2 listing gives dimensions of approximately 155 x 144 x 107 inches and a weight of approximately 18,300 lbs.

---

MORI SEIKI NZX-1500/800SY2 – 2014 – GENERAL INFORMATION

Specification	Details
Manufacturer	Mori Seiki
Model	NZX-1500/800SY2
Year	2014
Machine Category	CNC Turning Center
Machine Type	Multi-Axis CNC Lathe
Axis Configuration	6-Axis
Main Spindle Speed	6,000 RPM
Spindle Power	Approx. 30 HP
Bar Capacity	Approx. 2″
Maximum Turning Diameter	Approx. 11.8–12.5″
Machining Length	Approx. 31″
X-Axis Travel	Approx. 8.3″
Y-Axis Travel	Approx. 4.3″
Z-Axis Travel	Approx. 31.9″
Turrets	2
Turret Stations	Approx. 16 Each
Sub-Spindle	Yes
Live Tooling	Yes
CNC Control	FANUC 31iA
Tailstock	No
Weight	Approx. 18,300 lbs

---

INDUSTRIES THAT USE MORI SEIKI NZX-1500/800SY2

The MORI SEIKI NZX-1500/800SY2 is designed for high-productivity manufacturing where complex turned and milled components need to be completed efficiently.

Typical industries include aerospace, automotive, defense, oil and gas, energy, hydraulics, industrial machinery, robotics, medical equipment, precision engineering, and general contract manufacturing.

The twin-spindle and twin-turret configuration is especially valuable for manufacturers producing components requiring machining on both sides. The sub-spindle can transfer and reposition a component while the live-tooling and Y-axis capabilities allow milling and drilling operations to be completed on the same machine.

---

TYPICAL PARTS MORI SEIKI NZX-1500/800SY2 CAN PRODUCE

The NZX-1500/800SY2 can produce:

• Shafts
• Flanges
• Hydraulic components
• Valve bodies
• Pump components
• Automotive components
• Aerospace components
• Bushings
• Housings
• Couplings
• Precision fittings
• Threaded components
• Complex turned parts
• Multi-sided components
• Milled-and-turned components

Typical operations include turning, facing, boring, threading, grooving, drilling, tapping, milling, contouring, cross-hole machining, and multi-axis machining.

---

WHY CHOOSE MORI SEIKI NZX-1500/800SY2

The primary advantage of the MORI SEIKI NZX-1500/800SY2 is its ability to combine twin-spindle turning, twin-turret machining, Y-axis milling, live tooling, and C-axis control in one production platform.

Instead of transferring a component between separate CNC lathes and machining centers, manufacturers can complete many operations within one setup. This can reduce fixture changes, handling time, work-in-process, and positional errors.

The machine’s approximately 2-inch bar capacity, 6,000 RPM spindle speed, 30 HP power, 31-inch machining length, and 11.8–12.5-inch turning diameter make it suitable for a broad range of medium-sized components.

The FANUC 31iA control is also attractive in the used market because it provides established multi-axis CNC functionality and is familiar to many machining personnel.

---

WHY BUY USED MORI SEIKI NZX-1500/800SY2 – 2014

Buying a used 2014 MORI SEIKI NZX-1500/800SY2 can provide a manufacturer with sophisticated multi-axis production capability at substantially less cost than purchasing a comparable new twin-spindle, twin-turret turning center.

The machine’s greatest economic benefit comes from process consolidation. A component can potentially be turned, milled, drilled, threaded, and transferred to the second spindle without being manually removed from the machine.

A well-equipped used machine with FANUC 31iA control, twin 16-station turrets, live tooling, sub-spindle, Y-axis, chip conveyor, tool presetter, high-pressure coolant, bar feeder, and automation can be particularly valuable for production environments. Current used examples demonstrate that these options are available on NZX machines.

Before purchasing, inspect the main and sub-spindles, both turrets, Y-axis, C-axis positioning, live-tool drives, ballscrews, linear guides, chuck systems, transfer mechanism, CNC control, chip conveyor, coolant system, and machine geometry.

For a 2014 machine, also request power-on hours, cutting hours, spindle hours, maintenance records, crash history, service records, and a test-cut demonstration.

---

HOW MUCH DOES A USED MORI SEIKI NZX-1500/800SY2 – 2014 COST?

The current market provides a useful comparison for this machine. A 2014 MORI SEIKI NZX-1500/800SY2 in Illinois is currently listed as Used – Good with pricing available by quote. Its listed specifications include 6 axes, 30 HP, 6,000 RPM, 2-inch bar capacity, FANUC 31iA control, and a Fanuc robot.

There is also a 2014 MORI SEIKI NZX-1500/800S, a closely related but less capable configuration, currently listed at $99,000 USD with a Halter U-20 robotic loader, chip conveyor, mist collector, live tooling, sub-spindle, and FANUC 31iA control.

A useful additional benchmark is a 2012 NZX-1500/800SY2 that was listed at $108,000 USD, demonstrating that these twin-spindle, twin-turret machines can retain substantial value even when older than the 2014 model.

Based on these comparable listings, I would use the following practical estimates:

USED MORI SEIKI NZX-1500/800SY2 – 2014 PRICE RANGE	ESTIMATED COST
High Hours / Basic Configuration	$80,000 – $100,000
Functional Used Machine	$100,000 – $120,000
Good Condition / Production Ready	$120,000 – $145,000
Excellent / Well Equipped	$145,000 – $175,000
Low Hours / Automated Configuration	$175,000+

For a 2014 MORI SEIKI NZX-1500/800SY2 in good working condition, I would estimate approximately $110,000–$150,000 USD.

For your inventory listing, I would recommend using $120,000–$150,000 USD as the primary estimated used-market range for a clean, operational 2014 machine.

A machine equipped with Fanuc robot automation, bar feeder, high-pressure coolant, tool presetter, chip conveyor, mist collector, extensive live tooling, and low cutting hours could justify a value toward or above $150,000. A high-hour machine without automation or with significant spindle/turret wear could fall closer to $80,000–$100,000.

The current market evidence supports this general range: the closely related 2014 NZX-1500/800S is listed at $99,000, while a 2012 NZX-1500/800SY2 was listed at $108,000; the exact 2014 NZX-1500/800SY2 is currently quote-only.