USED HAAS VF2SS – 2016

The HAAS VF2SS is a Super-Speed 40-taper vertical machining center designed for high-speed production, precision machining, job-shop work, prototyping, and general industrial manufacturing. The 2016 HAAS VF2SS provides approximately 30″ x 16″ x 20″ of X-, Y-, and Z-axis travel, giving manufacturers a useful machining envelope for small- and medium-sized components, fixtures, tooling, and production parts.

The VF2SS platform is built around a 12,000 RPM inline direct-drive spindle with a maximum rating of approximately 30 HP and approximately 90 ft-lb of torque at 2,000 RPM. It uses a 40-taper spindle and a high-speed side-mount automatic tool changer. Haas’s VF2SS specifications identify a 30+1 tool capacity, while rapid traverses are approximately 1,400 IPM on all three axes.

The machine’s 36″ x 14″ table provides a practical workholding surface for vises, fixtures, and rotary equipment. The Super-Speed configuration is particularly useful for reducing cycle times because high spindle speed, rapid axis movement, and fast tool changes reduce both cutting and non-cutting time.

A 2016 machine may have different factory-installed options depending on its original configuration. Buyers should verify the actual spindle hours, control configuration, probing, fourth-axis preparation, coolant system, chip removal equipment, tooling, and maintenance history before purchasing.

---

HAAS VF2SS – AXIS

Specification	Details
Machine Type	Super-Speed Vertical Machining Center
Axis Configuration	3-Axis
X-Axis Travel	30″
Y-Axis Travel	16″
Z-Axis Travel	20″
4th-Axis Capability	Available / Configuration Dependent
5th-Axis Capability	Available with Optional Rotary Equipment
CNC Interpolation	3-Axis Standard

---

HAAS VF2SS – AXIS TRAVELS / WORK ENVELOPE

Specification	Details
X-Axis Travel	30″
Y-Axis Travel	16″
Z-Axis Travel	20″
Spindle Nose to Table Maximum	Approx. 24″
Spindle Nose to Table Minimum	Approx. 4″
Work Envelope	30″ x 16″ x 20″
Rotary Compatibility	Available

The 30″ x 16″ x 20″ travel range gives the VF2SS a useful machining envelope while keeping the machine relatively compact.

---

HAAS VF2SS – CAPACITY / TABLE

Specification	Details
Table Type	Fixed T-Slot Table
Table Length	36″
Table Width	14″
Number of Standard T-Slots	3
T-Slot Center Distance	Approx. 4.92″
T-Slot Width	Approx. 0.626″ to 0.630″
Maximum Table Load	Approx. 1,500 lbs
Workholding	Vises, Fixtures, and Custom Tooling
Rotary Compatibility	Available

The 36″ x 14″ table provides adequate workholding capacity for a wide variety of small- and medium-sized production components.

---

HAAS VF2SS – SPINDLE

Specification	Details
Spindle Type	Inline Direct-Drive
Spindle Motor Power	30 HP
Maximum Spindle Speed	12,000 RPM
Maximum Torque	Approx. 90 ft-lb @ 2,000 RPM
Spindle Taper	40-Taper
Bearing Lubrication	Air / Oil Injection
Spindle Cooling	Liquid Cooled
Rigid Tapping	Available
High-Speed Machining	Available
Through-Spindle Coolant	Optional / Configuration Dependent

The 12,000 RPM direct-drive spindle is particularly useful for high-speed machining, aluminum production, finishing operations, and applications requiring frequent high-RPM cutting.

---

HAAS VF2SS – TOOL CHANGER

Specification	Details
Tool Changer Type	Side-Mount Automatic Tool Changer
Tool Capacity	30+1
Tool Taper	40-Taper
Maximum Tool Diameter, Full	Approx. 3″
Maximum Tool Diameter, Adjacent Pocket Empty	Approx. 5″
Maximum Tool Length	Approx. 11″ from Gage Line
Maximum Tool Weight	Approx. 12 lbs
Average Tool-to-Tool Time	Approx. 1.6 Seconds
Average Chip-to-Chip Time	Approx. 2.2 Seconds

The high-speed side-mount tool changer helps minimize non-cutting time during multi-tool machining cycles.

---

HAAS VF2SS – CONTROL SYSTEM

Specification	Details
CNC Control	Haas CNC Control
Control Generation	Configuration Dependent
Display	Color LCD / Configuration Dependent
Program Memory	Configuration Dependent
USB Connectivity	Available
Ethernet Connectivity	Available
Wi-Fi Connectivity	Configuration Dependent
HaasConnect	Configuration Dependent
Rigid Tapping	Available
High-Speed Machining	Available
User-Definable Macros	Configuration Dependent
Coordinate Rotation & Scaling	Available / Configuration Dependent
Advanced Tool Management	Available
Remote Monitoring	Configuration Dependent

The exact control configuration should be checked on the individual 2016 machine because options and control specifications can vary.

---

HAAS VF2SS – FEEDRATES

Specification	Details
X-Axis Rapid Traverse	1,400 IPM
Y-Axis Rapid Traverse	1,400 IPM
Z-Axis Rapid Traverse	1,400 IPM
Maximum Cutting Feedrate	Approx. 833 IPM
X-Axis Maximum Thrust	Approx. 1,995 lbf
Y-Axis Maximum Thrust	Approx. 1,995 lbf
Z-Axis Maximum Thrust	Approx. 3,085 lbf
High-Speed Machining	Available

The high rapid traverse rates help reduce positioning time between cutting operations.

---

HAAS VF2SS – COOLANT / CHIP MANAGEMENT

Specification	Details
Flood Coolant System	Standard / Configuration Dependent
Coolant Capacity	Approx. 55 Gallons
Coolant Pump	Multi-Stage
Programmable Coolant	Available
Chip Auger	Available / Configuration Dependent
Chip Conveyor	Optional / Configuration Dependent
Through-Spindle Coolant	Available / Configuration Dependent
High-Pressure Coolant	Available / Configuration Dependent
Chip Washdown	Available
Window Air Blast	Available

The VF2SS platform supports a 55-gallon coolant system and can be equipped with additional chip and coolant-management options.

---

HAAS VF2SS – PROBING & AUTOMATION OPTIONS

Specification	Details
Work Probe	Available
Tool Setter	Available / Configuration Dependent
Wireless Intuitive Probing System	Available
Renishaw Probing	Configuration Dependent
4th-Axis Drive	Available
4th-Axis Wiring	Available
Rotary Table Integration	Available
Robotic Integration	Possible
Automation Compatibility	Available / Configuration Dependent

---

HAAS VF2SS – POWER REQUIREMENTS

Specification	Details
Standard Input Voltage	220 VAC, 3 Phase
High-Voltage Option	440 VAC
Full-Load Current at 220V	Approx. 70 A
Full-Load Current at 440V	Approx. 35 A
Minimum Air Pressure	80 PSI
Air Requirement	Approx. 4 SCFM at 100 PSI
Electrical Requirement	3 Phase

Actual electrical requirements should be confirmed using the individual machine’s nameplate and electrical documentation.

---

HAAS VF2SS – DIMENSIONS

Specification	Details
Machine Construction	Super-Speed Vertical Machining Center
Domestic Shipping Dimensions	Approx. 101″ x 99″ x 101″
Export Shipping Dimensions	Approx. 98″ x 91.5″ x 100″
Approximate Shipping Weight	7,800 lbs
Shipping Weight with Conveyor	Approx. 8,380 lbs
Installation Type	Industrial Installation Recommended
Floor Space Requirement	Configuration Dependent

Actual installed dimensions can vary with chip conveyors, coolant equipment, rotary equipment, and other accessories.

---

HAAS VF2SS – GENERAL INFORMATION

Specification	Details
Manufacturer	Haas Automation
Model	VF2SS
Year	2016
Machine Category	Super-Speed Vertical Machining Center
Spindle Taper	40-Taper
Spindle Speed	12,000 RPM
Spindle Motor	30 HP
Tool Capacity	30+1
X-Axis Travel	30″
Y-Axis Travel	16″
Z-Axis Travel	20″
Table Size	36″ x 14″
Maximum Table Load	Approx. 1,500 lbs
Primary Application	High-Speed Precision Machining
Production Environment	Job Shop to High-Volume Production

---

INDUSTRIES THAT USE HAAS VF2SS

The HAAS VF2SS is suitable for aerospace, automotive, medical, electronics, defense, industrial equipment, energy, mold and die, automation, and general contract manufacturing.

Aerospace manufacturers can use the machine for brackets, housings, fixtures, tooling, and smaller structural components. Automotive manufacturers can use the VF2SS for production components, prototypes, fixtures, and specialized tooling.

The Super-Speed configuration is particularly valuable in production environments where cycle time is important. Its 12,000 RPM spindle, 1,400 IPM rapid traverses, and fast 30+1 tool changer allow manufacturers to reduce non-cutting time and improve throughput.

The machine is also well suited to aluminum machining, where high spindle speeds and rapid feedrates can improve material removal and finishing performance.

---

TYPICAL PARTS HAAS VF2SS CAN PRODUCE

The HAAS VF2SS can produce aerospace brackets, automotive components, aluminum housings, electronics enclosures, industrial components, tooling plates, production fixtures, mold components, automation parts, repair parts, and custom-engineered products.

Its 30″ X-axis travel and 16″ Y-axis travel provide useful capacity for small- and medium-sized components. The 36″ x 14″ table can accommodate multiple vises, fixtures, and rotary equipment.

Typical machining operations include high-speed roughing, finishing, drilling, tapping, pocketing, contouring, face milling, engraving, fixture machining, and repeat production.

---

WHY CHOOSE HAAS VF2SS

The primary advantage of the HAAS VF2SS is its combination of 12,000 RPM spindle speed, 30 HP spindle power, 1,400 IPM rapid traverses, and a high-speed 30+1 side-mount tool changer.

The Super-Speed configuration is designed to reduce cycle times compared with conventional-speed VMCs. The high-speed spindle is particularly useful for aluminum, plastics, and other applications where elevated spindle speeds can improve cutting performance.

The compact footprint makes the VF2SS practical for shops that need high production capability without the floor space required by a larger vertical machining center.

Fourth-axis integration, probing, through-spindle coolant, chip removal systems, and automation options can further expand the machine’s production capabilities.

---

WHY BUY USED HAAS VF2SS

Purchasing a used 2016 HAAS VF2SS can provide manufacturers with a capable Super-Speed vertical machining center at a substantially lower acquisition cost than newer equipment.

The machine combines a 30 HP, 12,000 RPM spindle, 30+1 tool changer, 1,400 IPM rapid traverses, 40-taper tooling, and a compact work envelope. These features make it suitable for job shops, contract manufacturers, aerospace suppliers, automotive manufacturers, and production facilities.

A used VF2SS may also include valuable options such as WIPS probing, fourth-axis drive and wiring, through-spindle coolant, chip conveyor, programmable coolant, and high-speed machining.

When evaluating a 2016 machine, buyers should inspect spindle hours, power-on hours, spindle condition, axis backlash, ballscrews, linear guides, machine geometry, tool changer operation, coolant system, probing equipment, and control electronics.

Control generation is also worth confirming. Used-machine buyers frequently compare pre-NGC and Next Generation Control machines based on long-term support and available features, so the exact control configuration should be documented before purchase.

A well-maintained 2016 VF2SS can still provide strong production performance and can be an attractive choice for manufacturers that need Super-Speed machining capability without purchasing a new VMC.

---

HOW MUCH DOES A USED HAAS VF2SS COST?

A used 2016 HAAS VF2SS can typically be estimated at approximately $30,000 to $45,000, depending on spindle hours, mechanical condition, control configuration, factory options, tooling, maintenance history, location, and seller.

Machines with lower cutting hours, a healthy 12,000 RPM spindle, accurate axes, good machine geometry, functioning 30+1 tool changers, WIPS probing, fourth-axis capability, TSC, chip conveyors, and additional tooling can command prices toward the upper end of the range.

As a useful market reference, a 2025 discussion involving a 2018 HAAS VF2SS with approximately 6,000 hours, 300 PSI through-spindle coolant, a fourth axis, rotary equipment, and a 30+1 tool changer had an asking price of $60,000 and was considered reasonable by participants. Another 2026 discussion for an exceptionally low-hour 2020 VF2SS placed its estimated value around $50,000–$60,000, illustrating the premium that newer and very low-hour machines can command.

A 2016 VF2SS with higher hours or fewer options may therefore be considerably less expensive than a comparable 2018–2020 machine.

Before purchasing, buyers should conduct an under-power inspection and verify spindle noise and temperature, axis backlash, positioning accuracy, tool changer operation, coolant and lubrication systems, control condition, and maintenance history.

Transportation, rigging, installation, electrical connection, tooling, inspection, and repairs should also be included when calculating the total acquisition cost.

For manufacturers seeking an affordable high-speed VMC, a used 2016 HAAS VF2SS offers a strong combination of 12,000 RPM spindle performance, fast rapids, 30+1 tool capacity, 40-taper tooling, and production-oriented Super-Speed capability.