USED DOOSAN PUMA TT1500SY – 2008

The DN Solutions (formerly Doosan Machine Tools) PUMA TT1500SY – 2008 is a high-productivity twin-spindle, twin-turret CNC turning center designed for manufacturers producing complex small- to medium-sized parts in large volumes. Equipped with dual opposing spindles, upper and lower turrets, Y-axis capability, and live tooling, this machine can perform turning, milling, drilling, tapping, and back-side machining in one continuous cycle. Its ability to machine simultaneously on two turrets significantly reduces cycle times and boosts throughput.

The 2008 DOOSAN PUMA TT1500SY typically features 6″ to 8″ chucks, a bar capacity of approximately 2.0″ (51 mm), and maximum spindle speeds of up to 6,000 RPM on both spindles. The machine generally includes 12-station upper and lower turrets, full C-axis control, Y-axis travel of ±1.96″ (50 mm), and live tooling speeds up to 5,000 RPM. Most units are equipped with a Fanuc 18i-TB control, chip conveyor, parts catcher, and bar feeder interface.

The PUMA TT1500SY is especially well suited for automotive, medical, aerospace, electronics, and hydraulic component manufacturing where high volumes and tight tolerances are critical.

The DOOSAN PUMA TT1500SY remains a highly desirable used machine because it combines simultaneous machining capability, excellent reliability, and outstanding production efficiency.

DOOSAN PUMA TT1500SY – AXIS

DOOSAN PUMA TT1500SY – CAPACITY

DOOSAN PUMA TT1500SY – SPINDLES

DOOSAN PUMA TT1500SY – TURRETS

DOOSAN PUMA TT1500SY – CONTROL SYSTEM

DOOSAN PUMA TT1500SY – AUTOMATION

DOOSAN PUMA TT1500SY – DIMENSIONS

DOOSAN PUMA TT1500SY – GENERAL INFORMATION

INDUSTRIES THAT USE DOOSAN PUMA TT1500SY

• Automotive
• Medical Device Manufacturing
• Aerospace
• Electronics
• Hydraulics and Pneumatics
• Defense
• Precision Contract Machining

TYPICAL PARTS DOOSAN PUMA TT1500SY CAN PRODUCE

• Hydraulic Fittings
• Medical Connectors
• Automotive Shafts
• Valve Components
• Precision Bushings
• Aerospace Fasteners
• Turned and Milled Production Parts

WHY CHOOSE DOOSAN PUMA TT1500SY

The DOOSAN PUMA TT1500SY is designed for manufacturers that need extremely fast cycle times and high-volume production. Its dual-turret architecture allows two tools to cut simultaneously, while the sub-spindle enables complete front and back machining without operator intervention.

The addition of Y-axis and live tooling expands the machine’s capability beyond standard turning, allowing cross-drilling, milling, and tapping in one setup. This reduces handling, improves consistency, and increases overall productivity.

For shops focused on reducing cycle time and maximizing spindle utilization, the PUMA TT1500SY is an outstanding production platform.

WHY BUY USED DOOSAN PUMA TT1500SY – 2008

Purchasing a used DOOSAN PUMA TT1500SY – 2008 is an excellent way to acquire a highly productive twin-spindle, twin-turret turning center at a fraction of the cost of a comparable new machine. The TT1500SY was designed specifically for high-volume manufacturing where cycle time reduction and unattended operation are critical. Even though the machine was built in 2008, its architecture remains highly relevant because simultaneous upper and lower turret machining continues to be one of the most effective ways to increase output.

One of the primary advantages of buying this machine used is the exceptional value of its built-in capabilities. The machine combines two spindles, two turrets, Y-axis, live tooling, and automatic part transfer into a compact platform. Many used machines also include chip conveyors, parts catchers, bar feeder interfaces, and extensive tooling packages. These additions can significantly reduce startup costs and allow the machine to begin producing parts almost immediately.

The TT1500SY is especially attractive to automotive, medical, electronics, and hydraulic manufacturers producing large quantities of precision components. By machining both sides of the part and performing milling operations in one cycle, the machine eliminates secondary operations and improves dimensional consistency. This reduces labor costs, shortens lead times, and helps maintain tight tolerances.

Doosan machines are widely recognized for rugged construction, dependable Fanuc controls, and strong parts availability. Well-maintained machines can provide many additional years of reliable service. For manufacturers seeking to increase production capacity and improve efficiency while controlling capital expenditures, a used 2008 DOOSAN PUMA TT1500SY offers excellent productivity, proven reliability, and strong return on investment.

HOW MUCH DOES A USED DOOSAN PUMA TT1500SY – 2008 COST?

The cost of a used DOOSAN PUMA TT1500SY – 2008 depends on spindle hours, machine condition, maintenance history, and included accessories. Because this model features twin spindles, twin turrets, Y-axis, and live tooling, it generally commands stronger resale values than conventional CNC lathes.

Machines with low operating hours, documented maintenance records, and complete operational demonstrations are usually the most desirable. Valuable options such as bar feeders, parts catchers, chip conveyors, high-pressure coolant systems, and large live tooling packages can substantially increase overall value. In many cases, the included tooling and accessories represent a significant portion of the machine’s worth.

Buyers should carefully evaluate spindle condition, turret indexing accuracy, sub-spindle alignment, Y-axis performance, and machine geometry. Units that have been recently serviced or inspected may carry a higher price but often reduce the risk of unexpected repairs and downtime.

Demand for high-productivity twin-turret machines remains strong because manufacturers continue to prioritize shorter cycle times and automated processing. Purchasing a used 2008 DOOSAN PUMA TT1500SY typically provides substantial savings compared to buying a new production turning center while delivering exceptional throughput and long-term value.