USED DMG MORI SPRINT 20|5

The DMG MORI SPRINT 20|5 is a compact, high-speed multi-axis production turning center designed for ultra-high-volume machining of small precision components from bar stock. It belongs to the SPRINT series, which is known for combining Swiss-type style productivity with rigid CNC automation, making it ideal for industries such as medical, automotive, electronics, and precision engineering.

The machine is designed to process workpieces up to 20 mm bar diameter, with a maximum part length of approximately 180 mm, making it suitable for small shafts, pins, connectors, and precision cylindrical components. Its extremely compact footprint (around 21.5 ft²) allows it to deliver very high productivity per square meter of floor space, which is critical in modern automated factories.

A key feature of the SPRINT 20|5 is its 5 linear axes combined with up to 2 C-axes, enabling complex machining in a single setup. The machine typically includes a main spindle and counter spindle, both capable of up to 10,000 rpm, allowing simultaneous front and back-side machining. This dual-spindle architecture significantly reduces cycle time and eliminates secondary operations.

Tool capacity is another strong point, with up to 23 tool stations and multiple driven tool positions, enabling turning, drilling, milling, and cross-machining within one cycle. This makes it highly efficient for complex small parts where multiple operations are required.

The machine also features extremely fast chip-to-chip times (under 0.2 seconds in optimized cycles), which is critical for mass production efficiency. Thermal stability is ensured through a rigid cast bed and symmetric construction, helping maintain micron-level accuracy during long production runs.

Automation readiness is a core part of its design, supporting bar feeders and part unloading systems for lights-out production. The FANUC-based control system provides stable programming, simulation, and production monitoring.

Overall, the SPRINT 20|5 is a high-speed micro-production turning system built for maximum output, precision, and cycle time reduction in small-part manufacturing.

DMG MORI SPRINT 20|5 SPECIFICATIONS

WHY BUY USED DMG MORI SPRINT 20|5

Buying a used DMG MORI SPRINT 20|5 is a strong option for manufacturers focused on high-volume small-part production at low unit cost. Since the machine is designed for continuous bar-fed automation, it retains strong productivity even in used condition when properly maintained.

The biggest advantage is extremely low cycle time per part, even in older machines. The dual-spindle, multi-axis design allows simultaneous machining on both sides of the component, which significantly reduces production time compared to conventional lathes.

Cutting time is the most important evaluation factor. These machines are commonly used in 24/7 production environments, so usage hours can accumulate quickly. Machines with lower cutting time (under 20,000–25,000 hours) generally offer better long-term reliability. Units under 10,000–15,000 hours are especially valuable because spindle synchronization, turret accuracy, and guideway wear remain close to original factory condition.

Another major advantage is high productivity in a very small footprint. Even a used SPRINT 20|5 can replace multiple conventional machines in terms of output, making it highly cost-effective for high-volume production lines.

Additionally, the machine is highly automation-friendly. It is designed for integration with bar feeders and part handling systems, meaning it can operate in lights-out production environments even after years of use.

DMG MORI’s global support structure also ensures long-term availability of spare parts and service, and many used machines can be upgraded with modern controls or automation enhancements.

While it is not suitable for large or heavy components, the SPRINT 20|5 excels in precision micro-components, high repeatability, and extremely fast cycle times.

In summary, a used SPRINT 20|5 offers outstanding value for mass production environments where speed, consistency, and automation matter more than part size.

HOW MUCH DOES A USED DMG MORI SPRINT 20|5 COST?

The cost of a used DMG MORI SPRINT 20|5 depends on manufacturing year, configuration, automation level, condition, and most importantly, total cutting time.

For machines manufactured before 2000, comparable Swiss-type or small production CNC lathes typically range from $25,000 to $60,000, depending on condition and retrofit level. These older machines may lack modern automation features and advanced tool monitoring systems.

Machines produced between 2000 and 2010 typically fall within the $60,000 to $140,000 range. These units offer improved CNC control systems, better spindle performance, and more stable production capability. Machines with lower cutting time (under 20,000–25,000 hours) are priced higher due to better mechanical condition.

For SPRINT 20|5 machines from 2010–2025, used prices generally range from $140,000 to $320,000+, depending on turret configuration, driven tool options, and automation systems such as bar feeders or robotic unloading systems. Fully equipped production cells are at the upper end of this range.

Cutting time is a major valuation factor. Since these machines are often used in continuous high-speed production, wear can occur in spindles, guideways, and turret indexing systems. Machines with low cutting time (under 10,000–15,000 hours) are considered premium due to higher accuracy retention and longer remaining service life.

Buyers should carefully evaluate maintenance logs, spindle vibration, and axis backlash rather than relying solely on machine age or appearance.

Overall, the cost of a used SPRINT 20|5 is determined by configuration, automation setup, and usage history, with cutting time being the most important factor in determining true market value and long-term production reliability.