USED OKUMA 2SP-150H

The Okuma 2SP-150H is a compact, high-speed twin-spindle CNC turning center specifically designed for small-part, high-volume production. As part of Okuma’s 2SP-H series, it features a unique front-facing spindle layout that improves automation integration and reduces overall floor space requirements.

One of the key highlights of the 2SP-150H is its dual-spindle configuration, which allows simultaneous machining or sequential operations within a single setup, significantly reducing cycle times. The machine supports a maximum turning diameter of approximately 150–220 mm and a turning length of up to 150 mm, making it ideal for small precision components such as automotive parts, connectors, and fittings.

The spindle speed typically ranges up to 4,500–6,000 rpm, enabling high-speed machining with excellent surface finishes. It is equipped with twin 12-station turrets (2 x 12 tools), allowing flexible tooling and efficient multi-operation machining.

A major advantage of this model is its seamless integration with Okuma’s Gantry Loader (OGL), enabling automated loading and unloading for continuous production. Equipped with Okuma’s OSP control system and Thermo-Friendly Concept, the 2SP-150H ensures consistent accuracy, ease of use, and high productivity in compact manufacturing environments.

OKUMA 2SP-150H SPECIFICATIONS

WHY BUY USED OKUMA 2SP-150H

Buying a used Okuma 2SP-150H is an excellent investment for manufacturers focused on high-volume production of small precision parts. These machines are designed for speed, automation, and efficiency, making them highly valuable even after years of use. Their compact footprint and integrated automation capabilities make them especially attractive for shops with limited space.

Cutting time (spindle hours) is one of the most important factors when evaluating a used 2SP-150H. Machines with low cutting hours—typically under 5,000–7,000 hours—are considered lightly used and can perform close to new condition. Units with moderate usage (7,000–18,000 hours) remain highly reliable for production environments if properly maintained. Machines exceeding 18,000–25,000+ hours may require servicing of components such as spindles, turrets, or loader systems, but they can still provide strong value for less demanding applications.

One of the biggest advantages of the 2SP-150H is its ability to run automated production cycles. Even older machines retain features such as dual spindles, twin turrets, and gantry loader compatibility, enabling continuous operation with minimal operator intervention.

For manufacturers looking to increase throughput and efficiency, a used 2SP-150H offers excellent productivity, automation capability, and cost savings compared to buying new equipment.

HOW MUCH DOES A USED OKUMA 2SP-150H COST?

The cost of a used Okuma 2SP-150H varies depending on manufacturing year, configuration, condition, and especially cutting time. Since this model has been available since the 2010s, pricing is generally segmented by age and usage rather than pre-2000 categories.

For early-generation machines (2010–2014), prices typically range from $30,000 to $60,000. These machines often have higher cutting hours (12,000–25,000+) and may require maintenance or refurbishment, but they still offer full dual-spindle, automated production capability.

Machines built between 2015 and 2020 generally fall in the $60,000 to $120,000 range. These represent the most active segment in the used market and usually include moderate cutting hours (6,000–15,000), along with improved controls and automation integration.

For newer machines from 2021 to 2025, prices can range from $120,000 to $200,000 or more depending on configuration, tooling packages, and automation systems. These machines typically have low cutting hours (under 5,000) and are close to new condition.

Cutting time is one of the most critical pricing factors—machines with lower spindle hours command higher values regardless of age. Buyers should also evaluate automation setup (gantry loader), tooling availability, and maintenance history to determine the true overall investment and long-term return.