The Mazak MTV-655/80 is a vertical machining center designed for high-precision machining of medium-to-large components, offering a strong combination of capacity, rigidity, and cost-effective performance. As part of Mazak’s MTV series, it focuses on reliability and ease of use, making it suitable for job shops and production environments. The machine is equipped with a BT50 spindle, typically capable of speeds up to 6,000 RPM, delivering high torque for machining tougher materials such as steel and cast iron, while also handling aluminum applications efficiently.
The MTV-655/80 provides X/Y/Z travels of approximately 2,000 × 660 × 650 mm and a table size around 2,240 × 660 mm, making it well-suited for longer parts, plates, and structural components. Its rigid C-frame construction ensures stability during heavy cutting operations and helps maintain consistent accuracy over extended machining cycles.
The machine is typically equipped with a 24- to 30-tool automatic tool changer and Mazak’s MAZATROL CNC control, allowing for efficient programming and reduced setup time. Additional features such as heavy-duty guideways and reliable servo systems improve durability and machining performance. Overall, the MTV-655/80 is designed to deliver dependable precision, strong cutting capability, and efficient production for a wide range of machining applications.
MAZAK MTV-655/80SPECIFICATIONS
MAZAK MTV-655/80 – AXIS
Number of Axes: 3 Axes
Axis Configuration: Vertical Machining Center
Axis Movement Type: Linear X, Y, Z axes
Design: Heavy-duty C-frame construction for rigidity
MAZAK MTV-655/80 – AXIS TRAVELS
X-Axis Travel: 2,000 mm (78.74 in)
Y-Axis Travel: 650 mm (25.59 in)
Z-Axis Travel: 650 mm (25.59 in)
MAZAK MTV-655/80 – CAPACITY
Table Size: 2,240 mm x 650 mm
Max Table Load: Approx. 2,500 kg
Workpiece Capability: Large and heavy components
Table Surface: T-slotted precision machined table
MAZAK MTV-655/80 – SPINDLE
Spindle Speed: Up to 6,000 RPM
Spindle Taper: BT50 / CAT 50
Spindle Power: Approx. 18.5 kW (25 HP)
Spindle Type: High-torque geared spindle
MAZAK MTV-655/80 – TABLE
Table Size: 2,240 mm x 650 mm
Table Type: Fixed worktable
Table Design: Wide table for large workpieces
Load Capacity: Suitable for heavy-duty machining
MAZAK MTV-655/80 – TOOL TURRET
Tool Magazine Capacity: 30 tools
Tool Holder Type: BT50 / CAT 50
Tool Change System: Automatic Tool Changer (ATC)
Tool Features: Handles large and heavy tools efficiently
MAZAK MTV-655/80 – FEEDRATES
Rapid Traverse Rate: Up to 26 m/min (X/Y), 20 m/min (Z)
Cutting Feed Rate: Programmable
Guideways: Box or linear ways (model dependent)
Performance: Stable and consistent under heavy loads
Advantage: Large work envelope with strong cutting capability
INDUSTRIES THAT USE MAZAK MTV-655/80
Heavy Equipment
Automotive
Aerospace
Energy & Oilfield
General Engineering
TYPICAL PARTS MAZAK MTV-655/80 CAN PRODUCE
Large structural components
Machine bases and frames
Heavy-duty brackets
Tooling plates
Industrial housings
WHY CHOOSE MAZAK MTV-655/80
Large travel and table capacity
High-torque spindle for tough materials
Rigid construction for precision machining
Reliable performance in demanding applications
Ideal for heavy and oversized workpieces
WHY BUY USED MAZAK MTV-655/80
Buying a used Mazak MTV-655/80 is a practical investment for manufacturers looking for a robust and capable vertical machining center at a significantly lower cost than a new machine. Mazak machines are known for their durability, and the MTV series is designed to provide long service life with relatively straightforward maintenance.
One of the main advantages is its high torque capability. The BT50 spindle allows the machine to handle heavy cutting operations and tougher materials more effectively than smaller BT40 machines, making it ideal for industries such as automotive, heavy equipment, and general engineering. This capability remains valuable even in older machines, ensuring continued productivity.
From a productivity standpoint, the larger work envelope allows machining of longer components without repositioning, improving efficiency and reducing cycle time. Machines with moderate cutting hours (10,000–20,000 hours) typically offer the best balance between cost and remaining operational life.
Cost savings are a key benefit, with used machines generally available at 40–70% less than new models. However, cutting time is critical—machines with higher hours (20,000+) may require spindle rebuilds or axis servicing, particularly if used in heavy-duty applications. A well-maintained, low-hour machine can still deliver reliable performance and strong return on investment.
HOW MUCH DOES A USED MAZAK MTV-655/80COST?
The cost of a used Mazak MTV-655/80 varies depending on manufacturing year, condition, configuration, and most importantly, cutting hours. As a larger BT50 vertical machining center with extended X-axis travel, it is typically priced slightly higher than the MTV-655/60 but remains more affordable than gantry-style machines.
Machines manufactured before 2000 typically range from $15,000 to $35,000. These machines often have high cutting hours (20,000–35,000+) and may require refurbishment, particularly in spindle bearings, guideways, and ball screws.
Models from 2000–2010 generally fall within the $35,000 to $80,000 range. This segment offers the best value, especially for machines with 10,000–20,000 cutting hours and good maintenance records. Machines with upgraded controls or additional tooling options may command higher prices.
Newer machines from 2010–2025 typically range from $80,000 to $150,000+, depending on condition, features, and usage. Low-hour machines (under 10,000 cutting hours), particularly those used in lighter materials like aluminum, can achieve premium pricing due to reduced wear.
Ultimately, cutting time is more important than age. A heavily used newer machine may be less valuable than an older, well-maintained one, making spindle condition, maintenance history, and overall machine health key factors in determining true market value.
