The Mazak VTC-800/30 SR is a traveling-column vertical machining center designed for flexible 3-axis, 4-axis, and optional simultaneous 5-axis machining of long and complex components. Unlike the SDR version, which comes with dual synchronized rotary tables, the SR variant features a large fixed table with the option to add one or two NC rotary tables, allowing users to configure the machine based on their specific application needs.
The machine is equipped with a B-axis swiveling spindle head with a wide ±110° range, enabling machining of vertical, horizontal, and angled surfaces in a single setup. This significantly reduces setup time and improves overall productivity. The large table size of approximately 3500 mm × 820 mm allows machining of long workpieces or multiple parts simultaneously.
A high-speed CAT40 spindle with speeds up to 18,000 rpm provides versatility for machining a wide range of materials, from aluminum to steel. The traveling column design ensures consistent accuracy across the full length of the machine, while optional features such as a center partition enable dual-operation setups for increased efficiency.
Overall, the VTC-800/30 SR is a highly flexible and configurable solution for manufacturers handling long, complex components requiring multi-axis machining.
Capability: Designed for long and large components
SR Feature: Smooth machining response for stability
Productivity: Efficient and reliable machining
Application Focus: Structural and large-part production
INDUSTRIES THAT USE MAZAK VTC-800/30 SR
Aerospace
Automotive
Construction Equipment
Energy
General Manufacturing
TYPICAL PARTS MAZAK VTC-800/30 SR CAN PRODUCE
Long frames and rails
Structural components
Automotive chassis parts
Machine bases
Large plates
WHY CHOOSE MAZAK VTC-800/30 SR
Long X-axis travel for large parts
Stable machining performance
Rigid construction for accuracy
Versatile applications
Efficient chip management
WHY BUY USED MAZAK VTC-800/30 SR
Buying a used Mazak VTC-800/30 SR is a practical investment for manufacturers seeking flexible long-part machining capability at a significantly lower cost than a new system. One of the key advantages of this model is its modular design, allowing users to add or configure rotary tables based on their requirements, making it adaptable for both 3-axis and full 5-axis machining applications.
When evaluating a used machine, cutting time is far more important than the manufacturing year. Machines used in aerospace or high-production environments often accumulate significant spindle hours due to long machining cycles and continuous operation. This can result in wear in critical components such as the spindle, guideways, and optional rotary tables. These machines are typically priced lower but may require maintenance or refurbishment.
On the other hand, machines used in low-volume production, toolroom environments, or specialized applications tend to have lower cutting hours and better preserved accuracy, making them more desirable even if older. Another advantage of the SR model is that buyers can find machines with different configurations, including single or dual rotary tables, upgraded controls, and automation features.
Overall, a used VTC-800/30 SR offers excellent flexibility, scalability, and value, making it ideal for shops handling long components and transitioning into 5-axis machining.
HOW MUCH DOES A USED MAZAK VTC-800/30 SRCOST?
The cost of a used Mazak VTC-800/30 SR depends on year of manufacture, configuration, and most importantly, cutting hours. As a relatively modern machine, availability is mainly from the mid-2000s onward, with no units produced before 2000.
For machines manufactured between 2005 and 2012, prices typically range from $120,000 to $250,000 depending on condition, spindle usage, and whether a rotary table is included. Machines with high cutting hours are priced toward the lower end, while well-maintained machines command higher values.
For machines built between 2012 and 2018, prices generally range from $250,000 to $450,000. Machines equipped with optional NC rotary tables, advanced controls, and lower cutting hours are priced at the higher end due to increased flexibility and capability.
For newer machines from 2018 to 2025, prices typically range from $450,000 to $850,000 or more. Machines with Mazatrol Smooth controls, automation features, and low cutting hours command premium pricing due to improved performance and productivity.
Cutting hours remain the most critical pricing factor. Low-hour machines command premium pricing, while heavily used machines are discounted due to potential refurbishment costs, particularly for spindle systems, guideways, and rotary table components.
