USED MAZAK INTEGREX I-200H ST

The Mazak Integrex i-200H ST is a high-performance horizontal multi-tasking CNC machine designed to deliver maximum productivity through simultaneous machining and full process integration. As part of Mazak’s Integrex i-Series, the “H” configuration provides a horizontal layout that improves chip evacuation and thermal stability, making it ideal for long, continuous machining cycles. The “ST” configuration includes both a second spindle and a lower turret, enabling simultaneous operations and significantly reducing cycle times.

The machine integrates turning and milling operations under the “DONE IN ONE” concept, allowing complete part machining in a single setup. It features a powerful main spindle, a secondary spindle for back-side machining, and a B-axis milling spindle capable of full 5-axis simultaneous machining. The lower turret adds additional tooling capacity and enables parallel machining operations.

The i-200H ST is typically equipped with an 8-inch chuck and offers a maximum machining diameter of approximately 600 mm and a machining length of around 850 mm, with a Y-axis travel of about 210 mm. The milling spindle operates at up to 12,000 RPM. Advanced features such as Mazatrol SmoothAi control and AI-based thermal compensation ensure high accuracy and consistent performance across demanding applications.

MAZAK INTEGREX I-200H ST SPECIFICATIONS

WHY BUY USED MAZAK INTEGREX I-200H ST

Buying a used Mazak Integrex i-200H ST is an excellent option for manufacturers looking to maximize productivity while reducing capital investment. The ST configuration, which combines dual spindles with a lower turret, enables simultaneous machining, significantly reducing cycle time and increasing throughput compared to standard or S models. Used machines typically offer savings in the range of 40% to 70% compared to new units, depending on condition, configuration, and cutting hours.

Cutting time is one of the most critical factors when evaluating a used i-200H ST. Machines with higher cutting hours are generally more affordable but may require maintenance or inspection of key components such as both turning spindles, the milling spindle, and the lower turret system. However, Mazak machines are known for their robust construction and long-term durability, meaning even higher-hour machines can remain reliable when properly maintained. Machines with low cutting time command a premium due to reduced wear and longer operational life.

Another key advantage is efficiency. The ability to perform multiple operations simultaneously reduces setup time, labor, and handling errors. Additionally, used machines are often available much faster than new ones. Overall, buying used offers a strong balance of advanced capability, productivity, and return on investment.

HOW MUCH DOES A USED MAZAK INTEGREX I-200H ST COST?

The cost of a used Mazak Integrex i-200H ST varies depending on machine condition, configuration, and especially cutting time. Since this model has been available for several years, machines can be found across multiple age ranges.

Machines built before 2000 are relatively rare for this configuration but, if available, typically range between $120,000 and $220,000. These machines often have high cutting hours and may require refurbishment, making them suitable for lighter-duty applications or budget-conscious buyers.

Machines from 2000 to 2010 typically range from $220,000 to $450,000, depending on condition and cutting time. These machines offer a strong balance of advanced multi-tasking capability and affordability, particularly if well maintained and with moderate cutting hours.

More recent machines from 2010 to 2025 generally range from $450,000 to $900,000 or more, especially if equipped with advanced controls, automation systems, and low cutting hours. Machines with minimal cutting time command premium prices due to reduced wear and longer service life.

Cutting time remains one of the most important factors in determining value, as it directly impacts spindle condition, turret wear, and long-term reliability. Overall, the i-200H ST maintains strong resale value due to its simultaneous machining capability, horizontal design, and high productivity.