The used Okuma Genos M560-V is a CNC vertical machining center designed for precision milling, high rigidity, and reliable production performance. It is commonly used for machining plates, housings, fixtures, molds, and structural components that require consistent accuracy and repeatability. This model is part of Okuma’s GENOS series, which focuses on delivering a balance of performance, thermal stability, and cost-effectiveness for modern machining environments.
This machine is well suited for milling, drilling, tapping, and contouring operations across a wide range of materials including aluminum, steel, stainless steel, and even tougher alloys like titanium. It features a rigid double-column structure and Okuma’s Thermo-Friendly Concept, which helps minimize thermal deformation and maintain dimensional accuracy during long machining cycles.
With a high-speed spindle, fast rapids, and a 32-tool automatic tool changer, the Genos M560-V is often used in production settings where both speed and precision are required. When evaluating a used machine, buyers should inspect spindle condition, axis accuracy, tool changer operation, control system health, and coolant/chip management systems.
OKUMA GENOS M560-VSPECIFICATIONS
OKUMA GENOS M560-V – CAPACITY
Machine Type: CNC Vertical Machining Center
X Travel: ~1050 mm
Y Travel: ~560 mm
Z Travel: ~460 mm
Table Size: ~1300 × 560 mm
Table Load Capacity: ~900 kg
Suitable for Medium to Large Workpieces
Verify Exact Capacity by Configuration
OKUMA GENOS M560-V – SPINDLE
Max Spindle Speed: ~15,000 RPM
Spindle Taper: CAT 40 (Big-Plus)
Motor Power: ~22 kW (~30 HP)
High-Speed and Stable Cutting Performance
Suitable for Steel, Aluminum, and Exotic Alloys
Inspect Spindle Condition Carefully
OKUMA GENOS M560-V – AXIS CONFIGURATION
Axis: 3-Axis (X, Y, Z)
Rapid Traverse: ~40 m/min (X/Y), ~32 m/min (Z)
Designed for High-Speed Precision Motion
Thermally Stable Construction
Suitable for Complex Milling Operations
Verify Axis Accuracy and Wear
OKUMA GENOS M560-V – TOOLING SETUP
Tool Changer: 32 Tools Standard
Tool Taper: CAT 40
Side-Mounted Automatic Tool Changer
Suitable for Multi-Operation Machining
Fast Tool Change Capability
Inspect ATC and Tool Holders Carefully
OKUMA GENOS M560-V – FEEDRATES & APPLICATION
Suitable for High-Speed and General Milling
Good for 2D and 3D Contouring
Useful for Production and Job Shop Work
Supports Drilling and Tapping Operations
Performance Depends on Tooling and Setup
Best for Consistent Production Environments
OKUMA GENOS M560-V – COOLANT & CHIP MANAGEMENT
Designed for Efficient Chip Evacuation
Chip Conveyor Often Included
Through-Spindle Coolant Optional
Coolant System May Vary
Tank and Pump Condition Are Important
Clean System Improves Reliability
OKUMA GENOS M560-V – CONTROL SYSTEM
CNC Control: Okuma OSP (P300 Series Common)
User-Friendly and Advanced Interface
Supports High-Speed Machining Functions
Integrated Machine and Control System
Later Models Include Enhanced Features
Control Condition Is Critical
OKUMA GENOS M560-V – POWER & REQUIREMENTS
Power Requirement: 3 Phase
Typical Voltage: 200–440 VAC
Stable Power Supply Required
Air Requirement Depends on Configuration
Verify Installation Requirements
Confirm Facility Compatibility
OKUMA GENOS M560-V — GENERAL INFORMATION
Machine Type: CNC Vertical Machining Center
Series: GENOS M Series
Built for Precision and Stability
Thermally Controlled Design
Suitable for Production and Job Shops
Designed for High Efficiency
Widely Used in Industrial Applications
INDUSTRIES THAT USE OKUMA GENOS M560-V
Automotive
Aerospace
Medical
Electronics
Mold & Die
General Manufacturing
TYPICAL PARTS OKUMA GENOS M560-V CAN PRODUCE
Plates
Housings
Fixtures
Molds
Structural Components
Precision Machined Parts
WHY CHOOSE OKUMA GENOS M560-V
High Rigidity and Thermal Stability
Suitable for High-Speed Machining
Reliable Production Performance
Flexible for Multiple Applications
Strong Build Quality
Excellent Used Market Value
WHY BUY USED OKUMA GENOS M560-V
Buying a used Okuma Genos M560-V is a strong option for shops that need a reliable and rigid vertical machining center without the cost of a new machine. One of the biggest advantages is its structural stability. The double-column design and thermal compensation system help maintain accuracy even during extended machining operations.
Another key benefit is versatility. The machine can handle a wide range of materials and applications, from general machining to more demanding production work. Its high-speed spindle and tool capacity make it suitable for both short runs and continuous production.
A used Genos M560-V also offers strong value in the mid-size VMC category. For shops looking to improve milling capacity, maintain tight tolerances, and run consistent production cycles, this model is a practical and widely used choice.
HOW MUCH DOES A USED OKUMA GENOS M560-VCOST?
The price of a used Okuma Genos M560-V depends on machine year, condition, spindle usage, control system, tooling, and overall maintenance history.
Typical pricing ranges:
Pre-2015 models: around $35,000 to $70,000
2015–2020 models: around $60,000 to $110,000
2020–2025 models: around $90,000 to $160,000+
Machines with options like through-spindle coolant, probing systems, larger tool magazines, and automation readiness typically command higher prices. New machines are often quoted in the ~$140K–$200K+ range depending on configuration, which supports strong resale value in the used market.
